Question about Pioneer PRO-520HD 53" Rear Projection Television

1 Answer

Is the RGB computer-like jack at the rear of the Pioneer PRO-520HD projection TV a digital input like a DVI input? I'm trying to use the TV for BluRay discs. Chris Fox

Posted by on

  • foxc Dec 06, 2008

    After reading your sol'n I read on many on-line discussion boards that DVD manufacturers limit component output to 420i but the BluRay player I just bought (Panasonic BD-35) shows up to 1080i output from those jacks in the specs. Thank you mightily.

    Chris


  • foxc Dec 06, 2008

    HOWEVER, any output above 420i only occurs with BlueRay discs; there is no upscaling of regular DVD discs via the component outputs.

    Foiled again!

    Chris


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 505 Answers

The RGB input is like a computer monitor input, and may handle HD. I would recommend using component video instead for ease of use, but also most TVs will only handle a couple resolutions, but your component jack should handle 480i, 480p, 720p, and 1080i giving you flexabilty and a comprable picture.

Posted on Dec 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red light on back of pioneer pro-520hd


The most common issue on this model is the power board develops all kinds of bad solder connections--have to remove and in most cases hand solder the entire board.

Dec 16, 2012 | Pioneer PRO-520HD 53" Rear Projection...

2 Answers

BRIGHTNESS ON A Pioneer Pro-520HD REAR PROJECTION TV


Have you attempted to adjust the brightness setting?
Thanks,
Lee

Jul 26, 2008 | Pioneer PRO-520HD 53" Rear Projection...

1 Answer

Can this be connected to Apple TV?


through HDMI it should be able to im not sure but you can go to

www.google.com
search-the name of your (tv-Pioneer PRO-520HD-specs) the specs should let you know if you can or can't but most likely you should be able to

Jan 08, 2011 | Pioneer PRO-520HD 53" Rear Projection...

2 Answers

Picture has a red hue to it. I have checked the convergence and the lines up and stays put. The TV was working great when I turned it off and when I turned it back on this condition was present.


The problem could be a few things, check your color balance and contrast or try adjusting the guns. If its a fuzzy red haze, kind of like a halo around things, it may just be that the crt coolant fluid needs changed. I, myself, have had a problem with the tinted halo in my rear projection Toshiba tv, I replaced the crt coolant fluid and the picture returned to good as new.

May 15, 2010 | Pioneer PRO-520HD 53" Rear Projection...

1 Answer

What type of audio jack rgb/dvi in on rear of lg 50ps3


the dvi out of pc via adaptor to hdmi on tv has no audio,ok.
so LG diagram shows separate audio into Audio in RGB/DVI.
Resulting in video in on HDMI ok,but audio on RGB.Can not get both together.
Fix is revert to DVI to RGB lead with audio on RGB/DVI input.
The audio jack would only work with mono plug for audio in, to RGB.


Dec 08, 2009 | LG Televison & Video

2 Answers

Colors are skewed on Pioneer Pro-520HD


you can replace your the convergence chips on the convergence board. The board is to identify because it has a large heat sink. The convergence chips normally starts with STK... After you find the chip, you can buy online (ebay has a lot of listing) and costs around $10. If you know how to solder, it is very easy to do. I just replace the convergence chips on myPRO-610HD and it works perfectly.

Feb 20, 2009 | Pioneer PRO-520HD 53" Rear Projection...

1 Answer

Pioneer tv


you may have problem with convergence IC is shorted and goes in protec mode

Oct 02, 2008 | Pioneer PRO-520HD 53" Rear Projection...

1 Answer

TV not working


need mor info the tv when turn on after 15 or 30 minuts works fine ?

Mar 21, 2008 | Pioneer PRO-520HD 53" Rear Projection...

1 Answer

PRO-520HD Tv will not stay on


you may have short in convergence circuit but this is a job for experienced tech after replacing ic's need to get in to settings and and is kind of complicated

Mar 18, 2008 | Pioneer PRO-520HD 53" Rear Projection...

Not finding what you are looking for?
Pioneer PRO-520HD 53" Rear Projection Television Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73438 Answers

Jaime Hernandez

Level 3 Expert

2311 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...