Question about Dyson Memory CRO1 Front Load Washer

Open Question

Error Code F13 Dyson Washing machine CR01

I have found a Dyson machine for sale, with the above problem fault code, is this easy to repair please.

Posted by on

6 Suggested Answers

  • 105 Answers

SOURCE: how to repair a F 11 fault on a DYSON CR01 flow check

To Clear F11 Code after a power cut.

1, Power off at the machine. Do the next 4 steps within 3 seconds.
2, Press Temperature Button in.
3, Power on
4, Release temperature button
5, press Soil Type button

You will now hear the door lock release so you can get to your pants.

Diagnostic code is now displayed. You can switch the washer off and back on and the error code is clear. If you do this it will work.

Posted on Feb 10, 2009

  • 1 Answer

SOURCE: open coin trap

use side of spanner to open the circular water drain plug on coin trap, remove all water.
use flat screwdriver to lift yellow tab at top of coin trap whiloe turning coin trap anticlockwise.

Posted on Mar 10, 2009

  • 326 Answers

SOURCE: F14 error code, and says Flooding. Help please.

F/14 ERROR CAUSES DUE TO:--EEPROM ErrorThe Central Condrol Unit (CCU) receives it's data from an EEPROMonboard the CCU. If there is an error reading this data, it will cuse this error.


TO RESLVE THIS ERROR MANUALLY TRY THIS BEFORE CALLING ENGINEER :--
A power glitch may cause this error. Try unplugging the Unit for two minutes to see if that fixes the error.
Check CCU

Posted on May 06, 2009

taran_2005
  • 10515 Answers

SOURCE: how to repair a F 11 fault on a DYSON CR01 flow check

To Clear F11 Code after a power cut.

1, Power off at the machine. Do the next 4 steps within 3 seconds.
2, Press Temperature Button in.
3, Power on
4, Release temperature button
5, press Soil Type button

You will now hear the door lock release so you can get to your pants.

Diagnostic code is now displayed. You can switch the washer off and back on and the error code is clear. If you do this it will work.

Thanks for using Fixya.

Posted on May 28, 2009

GodBlessU
  • 3513 Answers

SOURCE: f11 fault code

Hi,

Please find the steps that needs to be taken for trouble shooting F11 fault code specially if there was a power cut.

1, Power off at the machine. Do the next 4 steps within 3 seconds.
2, Press Temperature Button in.
3, Power on
4, Release temperature button
5, press Soil Type button

You will now hear the door lock release so you can get to your pants.

Diagnostic code is now displayed. You can switch the washer off and back on and the error code is clear. If you do this it will work.

I am sure it would help you to resolve the issue.

God Bless.

Posted on Jul 09, 2009

  • 4 Answers

SOURCE: how to repair a F 11 fault on a DYSON CR01 flow check

f11 fault code is a problem with the main power board (could be blown fuse) or a blown board check the fuse the board is behind the back plate in the bottem right corner (looking from the back of the machine.(!unplug before you take apart!)

Posted on Sep 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What does error F:16 indicate?


no one will know without a MAKE and MODEL.

Dec 26, 2015 | Washing Machines

1 Answer

Dyson repair manual


Hi there, it's Jack at Dyson.

An F11 fault code means 'no motor action'. Unfortunately since 31st December 2012, we have been unable to support CR01 and CR02 washing machines with spare parts or servicing. In October 2012 proactively wrote to all CR01 and CR02 owners that we'd interacted with within the last 3 years to make them aware of this.

If you would like to discuss your concerns further with one of our experts, you can reach us on 0800 298 0298. Calls are free from UK landlines, and we're available from 8am-8pm from Monday to Friday, and 8am-6pm on weekends.

Aug 11, 2014 | Dyson Memory CRO1 Front Load Washer

2 Answers

Dyson cr01 fault F4


Hi Sue, it's Jack at Dyson.

An F4 fault code means 'inner door opening'. Unfortunately since 31st December 2012, we have been unable to support CR01 and CR02 washing machines with spare parts or servicing. In October 2012 proactively wrote to all CR01 and CR02 owners that we'd interacted with within the last 3 years to make them aware of this.

If you would like to discuss your concerns further with one of our experts, you can reach us on 0800 298 0298. Calls are free from UK landlines, and we're available from 8am-8pm from Monday to Friday, and 8am-6pm on weekends.

Mar 17, 2014 | Dyson Flowcheck CRO1 Front Load Washer

1 Answer

F13 for AQM9D 49 U


Hi Ashraf, it's Jack at Dyson.

Unfortunately since 31st December 2012, we have been unable to support CR01 and CR02 washing machines with spare parts or servicing. In October 2012 we proactively wrote to all CR01 and CR02 owners that we'd interacted with within the last 3 years to make them aware of this.

If you would like to discuss your concerns further with one of our experts, you can reach us on 0800 298 0298. Calls are free from UK landlines, and we're available from 8am-8pm from Monday to Friday, and 8am-6pm on weekends.

Alternatively you may wish to check with local repair services for advice - please note, we cannot recommend or endorse specific repair companies.

Nov 25, 2013 | Dyson Memory CRO1 Front Load Washer

1 Answer

Hi my dyson cr01 is showing a p900 fault could you tell me what this means ? Thanks Rob


Hi Rob,

Sorry to hear you're having difficulties with your CR01 Flowcheck. We don't recognise the error code you've provided, so it's probably best if you get in touch with us directly. One of our experts will be happy to run through some troubleshooting over the phone with you, and recommend the best course of action. You can call us free on 08002980298 - our Helpline is open from 7am until 10pm, 7 days a week. We'll look forward to hearing from you.

Kind regards,

Jack
Dyson Online Customer Support

Aug 13, 2011 | Dyson Flowcheck CRO1 Front Load Washer

1 Answer

F13 appeared on the display. Can you tell me what this means


Hi from retired Englishman in SW France,
'F13' for a Dyson (CR01) stands for 'heating error. There is likely to be a problem with either the heater element or the temperature sensor. Both require a service engineer's attention I suggest ;-0(

If this has assisted and/or clarified the situation for you please consider a 4 thumbs up on our rating.
Thanks and good luck!
John C

Jun 27, 2011 | Dyson Washing Machines

1 Answer

Dyson CR01 - How to clear F8 - Overfilling : Turn Off Water?


Hi there,

Don't panic, simply call our Helpline free on 0800 298 0298. One of our advisors will be able to assist you!

Kind regards
Darran
Dyson Customer Service

Apr 07, 2010 | Dyson Flowcheck CRO1 Front Load Washer

1 Answer

F11 fault code


Hi,

Please find the steps that needs to be taken for trouble shooting F11 fault code specially if there was a power cut.

1, Power off at the machine. Do the next 4 steps within 3 seconds.
2, Press Temperature Button in.
3, Power on
4, Release temperature button
5, press Soil Type button

You will now hear the door lock release so you can get to your pants.

Diagnostic code is now displayed. You can switch the washer off and back on and the error code is clear. If you do this it will work.

I am sure it would help you to resolve the issue.

God Bless.

Jul 09, 2009 | Dyson Flowcheck CRO1 Front Load Washer

1 Answer

How to repair a F 11 fault on a DYSON CR01 flow check


To Clear F11 Code after a power cut.

1, Power off at the machine. Do the next 4 steps within 3 seconds.
2, Press Temperature Button in.
3, Power on
4, Release temperature button
5, press Soil Type button

You will now hear the door lock release so you can get to your pants.

Diagnostic code is now displayed. You can switch the washer off and back on and the error code is clear. If you do this it will work.

Thanks for using Fixya.

May 28, 2009 | Dyson Flowcheck CRO1 Front Load Washer

1 Answer

How to repair a F 11 fault on a DYSON CR01 flow check


To Clear F11 Code after a power cut.

1, Power off at the machine. Do the next 4 steps within 3 seconds.
2, Press Temperature Button in.
3, Power on
4, Release temperature button
5, press Soil Type button

You will now hear the door lock release so you can get to your pants.

Diagnostic code is now displayed. You can switch the washer off and back on and the error code is clear. If you do this it will work.

Oct 22, 2008 | Dyson Flowcheck CRO1 Front Load Washer

Not finding what you are looking for?
Dyson Memory CRO1 Front Load Washer Logo

Related Topics:

605 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dyson Washing Machines Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1029 Answers

Are you a Dyson Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...