Question about Philips 50PFP5332D 50 in. Plasma Television

2 Answers

Television has sound but no picture

Philips Plasma 50PFP5332D. Turned on the TV this morning and the sound came on but no picture. Unplugged TV and all aux connections. Checked cable in from wall with another TV, which worked fine. Re-plugged in TV and turned on the TV and still have sound without a picture. Any ideas? Richard

Posted by on

  • 2 more comments 
  • jewell_2001 Jan 31, 2009

    I'm having the exact same problem with my Phillips 50 in. Plasma and I checked all the cables on mine and they are all tight and working, but there is still no picture, but there is sound. I've also tried to turn my tv on and off to see if that would work, but still no luck.

  • phillip2402 Mar 11, 2009

    Philips 50" plasma - Sound but no picture.

    Checked everything I can, unplugged it for a couple of hours etc... But still nothing different. It is only 12 months old & just out of warrenty.



    Anyone with further ideas????

  • pistedoffed Mar 22, 2009

    you need to keep unplugging it and plugging it back in until it comes on we have the same problem with our 50' you can also unplug the tv for 4 hours and plug it back in and that is the master reset for the TV

  • debkowal1 Apr 03, 2009

    I liked my TV until it died. I thought it would last more than 1 1/2 years. I have no picture but will get sound. I've tried to unplug and plug it back in and still nothing. Any other ideas?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Check the cables first that connect to your video device, are they in tightly?  Test the cables on another TV to make sure they haven't gone bad, which is common.  Also check the input selection on the TV to make sure it matches with the video input the cable is connected to.

Posted on Dec 06, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You can try unplugging the tv and wait for a couple minutes and then plug it back in... I just did this and now the television works again.

Posted on Jan 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sound but no picture


Might be the backlight inverter. Hold a flashlight up to the tv when it's turned on, if you see picture, it's the inverter. Try out a company named ShopJimmy.com for parts. They have been wonderful to me in the past, great prices, great customer service. I included a link to your model page on their site. Hope that helps!
TeeVeeMan2@gmail.com
http://www.shopjimmy.com/catalogsearch/result/?q=50PFP5332D

Sep 02, 2011 | Philips 50PFP5332D 50 in. Plasma...

1 Answer

We were watching tv last night and it the picture just turned off. the machine was on but no picture. i turned off the tv and tried again this am. no picture.


You either need this part (http://cgi.ebay.com/Philips-50PFP5332D-37-LJ92-01401-Buffer-Board-/150501144120?pt=LH_DefaultDomain_0&hash=item230a913638) or this one depending on your dead screen issue (http://cgi.ebay.com/Philips-50PFP5332D-37-LJ41-04216A-X-SUS-XSUS-Board-/170550290208?pt=LH_DefaultDomain_0&hash=item27b596e720)

Oct 20, 2010 | Philips 50PFP5332D 50 in. Plasma...

1 Answer

50PFP5332D Plasma tv. My tv sounds like its trying to turn on but the blue light flashes and a clicking noise keeps repeating and no picture.


I have the same problem with my TV. I haven't verified this yet, but someone I know who's a electronics genius told me that its the buttons on the TV (power, channel, volume, etc.) He said at the factory many of the "button boards" were tightened too much and cracked. When you turn the TV on, the clicking noise is a loose connection. He said it's easy to replace yourself, and about 30 bucks on ebay. No promises though.

May 20, 2010 | Philips 50PFP5332D 50 in. Plasma...

1 Answer

50' philips plasma tv has sound but picture is distorted


I sugest you to change the video resolution settings on the PS-3 to see if TV sets to any one resolution...if you have any other video out (analog from PS3)...connect the out to TV and check video at different resolutions. If PS3 has Deep Color settings turn it OFF.

Apr 10, 2010 | Philips 50PFP5332D 50 in. Plasma...

1 Answer

TV sound but no picture


Can you tell me which Cable box you are using?Which model/region?

The possibility is that the HDCP handshake could not have happend correctly and hence the issue. Try to connect to different HDMI input of TV from Cable box. If possible change the resolution of cable box and check video

Nov 01, 2009 | Philips 50PFP5332D 50 in. Plasma...

1 Answer

My 50PFP5332D/37 Philips plasma tv stopped working. The TV turned off while I was watching it and now there is no power coming into the tv. I unplugged it for a few hours and tried plugging it back in...


You may need to replace the Y-buffer to say the least. And if this is not the problem, you will need to replace theY-main board. If the Y-main board is bad you will also change the Y-buffer. Please see a Philips Tech!!!

Mar 11, 2009 | Philips 50PFP5332D 50 in. Plasma...

1 Answer

How many Main Boards are in the Philips 50'' Plasma TV model 50pfp5332D/37?


the Philips 50'' Plasma TV model 50pfp5332D/37
has only one main board
has many sub bords supporting tat main board

Mar 08, 2009 | Philips 50PFP5332D 50 in. Plasma...

2 Answers

Philip plasma tv


My parents have a Philips 50PFP5332D/37 the blue indicator light is on but there is no picture or sound. Is there anything I can do to help them fix it outside of calling a tech. I can get parts and fix tvs but unfortunately I am in another state 7 hours aways.

Oct 19, 2008 | Philips 50PFP5332D 50 in. Plasma...

2 Answers

Phillips 50 inch Plasma


Philips 50 inch plasma tv no video but has sound

Sep 28, 2008 | Philips 50PFP5332D 50 in. Plasma...

Not finding what you are looking for?
Philips 50PFP5332D 50 in. Plasma Television Logo

Related Topics:

536 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69878 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...