Question about Mitsubishi WD-62525 62" Rear Projection HDTV

1 Answer

No picture on my 62" DLP Mitsubishi

I have had all major parts replaced over the past year.  Just the other day the set took what seemed like 5 minutes to get the picture...last night no picture at all and same today. I turned the TV power source off and after an hour restarted.  Now it shows I have a red light at the lamp diod.  The lamp was replaced once about a year ago.  I imagine the problem is with the lamp but shouldn't a new lamp last a few years?  (If it is a lamp)  This TV is used no more than 20 hours a week.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 225 Answers

I am not sure what the problem is, but usually if a lamp is bad, the other 2 lamps will still function. Since you are getting no picture at all, I am thinking it is a circuit board problem. TV electronics are expected to last 3-5 years. After that, many components will start to go out one by one. If you have your tv repaired, I would replace the whole circuit boards instead of just the bad component. The power board is the #1 board I would replace 1st. This is the most stressed board and will cause most of your tv problems.

Posted on Dec 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

60 inch dlp tv picture is bright mitsubishi


try to restore factory settings so that we can easily diagnose if the problem is on the settings or have a faulty parts inside

Best regards,
Chester

Jan 16, 2012 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

My 62 inch dlp tv came on and was working then with out any noise or notice the picture went to black and a steady red light came on under the word "lamp". We looked at the bulb and it does not look burned...


The tv lamp was replaced when? The tv on about 4 or 5 hours a day right?The lamp was replaced about a year or a year an a half ago?The projection lamp is dead,the life span is over.Must replaced with a new lamp.

Jul 01, 2010 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Replacement Mitsubishi lamp busted again in less a year!


A Halogen lamp is a Halogen lamp. They are designed to last between 3000 to 5000 hrs.
You got a much longer life than expected on
the original lamp.

Jul 22, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

New bulb/TV still shuts down


Its far more likely the result of the power pwb capacitors that have failed. As the 34 code will appear if the capacitors fail on the Power PWB. You can get the V26 DLP Power repair kit at the following link.with free instructions
http://servicemanuals.vstore.ca/product_info.php/pName/mitsubishi-v26-dlp-power-pwb-repair-kit/cName/repair-kits

Apr 30, 2009 | Mitsubishi WD-62725 62" Rear Projection...

2 Answers

Picture getting darker over the years


It could be your Light Engine. However, I would first check a few things:

1. Make sure your Low Power/Lamp settings are adjusted so that they meet your brightness needs.

2. Make sure you used a Mitsubishi original lamp, as generics get chewed through fast and hard.

3. Try another lamp; sometimes you can get a bad one in the bunch.

All those things don't work, consider a Light Engine ($400 + for parts; $300+ for labor)

Mar 11, 2009 | Mitsubishi WD-73827 73" HDTV DLP TV

1 Answer

Mitsubishi 65" DLP HDTV, Status light is red, no picture


Check your lamp; it may have blown. Sound, no picture and a red light are classis signs a lamp has failed.

Feb 02, 2009 | Mitsubishi WD-62528 62 in. LCD Television

1 Answer

Mitsubishi rear projection tv color problem


I'm going to guess that this unit is a DLP projection set and that the lamp is not new. Try a new lamp. The heat of the lamp will char over time. If not the lamp, some of the internal filters in the light engine might be getting effected by heat and require replacement.

Keep us posted.
Dan

Sep 12, 2008 | Mitsubishi Televison & Video

1 Answer

DLP picture problem


no way to test it other than install it in a known working set unfortunately. What seems to be your problem with the mitsubishi?

Apr 22, 2008 | Mitsubishi WD-62725 62" Rear Projection...

1 Answer

Tv problem


The bad news,I have had to replace countless color wheels on these units.The good news,That part is avail. separately and isn't to hard to put in.

Nov 11, 2007 | Mitsubishi WD-62725 62" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-62525 62" Rear Projection HDTV Logo

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1207 Answers

The Knight
The Knight

Level 3 Expert

72611 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...