Question about HP LaserJet 1320 Printer

1 Answer

LaserJet 1320 Trying to locate how to obtain the retaining clip that attaches the transfer roller to the right side of an HP LaserJet 1320. Have contacted HP tech support and gotten absolutely no help whatsoever - just the universal "take it to your nearest ASP". Thank you!

Posted by on

  • Joe Adams Feb 15, 2007

    No good - I ended up ordering the Transfer Roller Assy from HP direct. What was sent had two bare rod ends, NO CLIP! I order all my normal parts from Parts Now!. They also checked their stock and it also does not come with the clip.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 624 Answers

You can use the HP parts surfer to ID your part: Then the issue becomes where you buy it: Good luck and please don?t forget to rate this posting.

Posted on Feb 15, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Tis can't pickup the paper and its making noise

If your printer can not pick up the paper then you need to change the pickup roller and separation pad. You need to get the preventative maintenance kit RK-1320, this has the roller, pad and transfer roller. It is available:

Oct 16, 2012 | HP LaserJet 1320 Printer

1 Answer

My printer hp laserjet 1320 output is light why

The two common things that cause this type of problem are:
1) low toner - remove the toner and shake it from side to side to distribute the toner evenly in the cartridge to test. If the print gets better then you need to get a new toner cartridge because your is almost out.
2) The transfer roller that charges the paper to allow the toner to transfer to the page is worn out and will need to be replaced. The roller is user replaceable and comes in the maintenance roller kit that you can get here:
Replacing the rollers takes about 10 minutes or less.

I hope this helps you get your print going again.

Oct 02, 2012 | HP LaserJet 1320 Printer

1 Answer

Hp 1320n printer that constantly have paper jams after printing a few pages

As Vishwanathu stated first try cleaning the pickup roller. It is located on the bottom of the printer. Remove the paper tray and you will find it as shown here.

If cleaning the roller does not solve the issue then the roller kit will need to be replaced. The rubber tire gets worn down and become smooth, when this happens it can't grip the paper right to feed it into the printer. The roller kit for the Laserjet 1320 is available here:

I hope this helps, if so please rate my solution.


Aug 24, 2011 | HP LaserJet 1320 Printer

1 Answer

After cleared paper jam, HP LaserJet 1320 prints blank pages

Yes you can replace the transfer roller, but check to make sure the roller is firmly seated into its holder and that the springs are contacting the metal shaft.

Good Luck

Nov 20, 2009 | HP LaserJet 1320 Printer

4 Answers

Hp laserjet 1320 printing blank pages

check printer door, there is a small plastic piece wich pushed down (to open) lasser scaner cover. if this piece is broken you can get blank page

Jun 30, 2009 | HP LaserJet 1320 Printer

1 Answer

1320 hp printer/no ink on paper

Try cleaning drum voltage contact

Sep 06, 2017 | HP LaserJet 1320 Printer

1 Answer


The white roller is the hub that engages with the toner cartridge after it is installed. It is flush with the toner door open. As the door is closed the white arm attached to the toner door on the right side causes it to move inward. One possible scenario is that the tab on the door that it clips to is broken or the clips on the arm are damaged.

Nov 12, 2008 | HP LaserJet 2420 Printer

1 Answer

Toner marks down right side of page

hmmm...sounds like your toner cartridge is truly unhappy. I'd return it if I were you.

no worries..start by getting new driver for that here

Feb 28, 2008 | HP LaserJet 1320 Printer

4 Answers

Laserjet 1320 will not pick paper

Paper misfeeds and failure to pickup the paper are both common symptoms of a worn pickup roller. This roller is on the bottom of the printer as shown in the attached picture.
With use the rubber tire gets smooth and can't grip the paper enough to pick it up and push it into the printer. The roller kit is easy to install yourself and will get the printer back going as good as new. You can get the roller kit here:

I hope this helps, if so please rate my solution.


Dec 05, 2007 | HP LaserJet 1320 Printer

Not finding what you are looking for?
HP LaserJet 1320 Printer Logo

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts


Level 3 Expert

4345 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Cindy Wells

Level 3 Expert

5796 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides