a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi I was wondering were can i buy any one of these head units, i really want the Pioneer Deh-p9650. but i cant not find one place were i can buy it. i usto have the 8400mp like 6 or 7 years ago but i sold it and now i want a nother 1... i would really like to buy the Pioneer Deh-p9650mp so if any one can point me in the right direction i would be more then greatful.
The RCA jacks on the back of the Pioneer DEH-1500 are preamp outputs, not inputs. They are to connect an external amplifier for additional speakers or subwoofers.
The output from your iPod is probably "bleeding over" into the receiver detector stage. When the antenna is disconnected, the signal passes into the amp by itself. Connecting the antenna provides enough signal so that both are amplified.
To connect the iPod, you need to purchase a wireless iPod adapter, or a new head unit that includes an "AUX" input or a dedicated adapter for the iPod.
You have to shut the radio off. Then press and hold down the main knob until u see the menu., scroll throught the menu until you get to aux 1, then turn it on. I hope this helps point you in the right direction. Don't forget to rate my answer.
there is an interconnector to connect this unit to the aux source (CD-RB20/CD-RB10)(sold seperately).
After connecting, press SOURCE until AUX appears in the display.
Press "play" on your ipod.
i sincerely hope this answers your question.
The adapter cable will convert the changer port on your head unit into an AUX input with dual RCA jacks. Once connected, the head unit will detect the cable and allow it to be another source (i.e. radio, cd, aux).
To connect your iPod to the adapter cable, use any iPod cable or dock that outputs to male RCA plugs.
On a slightly different model and only if you would venture to try:
with the iPod via cable plugged to the iP-Bus port and the unit powered off but the powersupply on -
1. press and hold for a couple of seconds the Function button (FUNC) or till the clock starts to flash;
2. the arrow keys (left/right) will move you through the different menu settings;
3. the arrow keys (up/down) will move you through the different selection for each setting;
4. look for source, external, AUX, iPod or whatever will be displayed which may refer to an external input;
5. soon as you have enabled/set the AUX, press and hold the FUNC button while turning the unit on. This will save the current setup.
Hope this also work for your DEH-P3000.
Good luck and kind regards.