Question about Televison & Video

1 Answer

Picture colors are out of alignment

A firm tap on the top left side used to bring the picture back in alignment but I can't get the colros to line up. The picture looks like two picures on top of each other. What can I do? Thanks

Posted by on

  • plenfeld Jan 08, 2009

    the red gun will not allign with the other two. the vertical works but not the horizontal.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 106 Answers

Your convergence IC's are bad. The manufacturer and model will determine the part number for the IC's. They probably started going bad with the loose coonection (hence tapping on it made it work) and are now bad

Posted on Dec 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The picture on our Sony TV Model KP-43HT20 recently became distorted, concaving at top and bottom. If I use reset the Flash Focus, the picture will return to full screen side for awhile but the colors do...


The tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergene board have dead 2 STK convergence ICS and some or all of it resistors are dead too.These parts on the tv convergence board,must be replaced to solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

Jan 15, 2011 | Sony KP-43HT20 43" Rear Projection...

1 Answer

Left and right sides, seeing triples in three colors,but the center is fine?


This tv have a problems known as a convergence problems,it dead.The tv have colors lines R,G,B mis alignment,have picture colors shadows or 3D picture look alike.The tv convergence board have dead 2 STK convergence ICS and some or all it resistors.These parts must be replaced on the tv convergence board to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 08, 2010 | Mitsubishi WS-55315 55" Rear Projection...

1 Answer

Colors are separated on the top from the left to right


Probably the color convergence is off. I had a similar problem. Have you tried the magic focus button yet? That is located at left in the small front control panel. Power on TV, wait 20 min (according to user guide), then press the magic focus. If that doesn't fix the problem, you could try the service mode alignment procedure. But that's a little trickier. I don't have a link handy for that procedure right now, but will look for it if magic focus doesn't re-align your color convergence.

Jan 02, 2009 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Projection T.V. Picture


Replace Both of your STK ICs convergence ICs STK392-110 use 150s Better ICs Call Mats 1-800-628-1118 Also RK42 RK46 RK48 RK50 RK54 RK58 RK60 will have to get back to you on resistor values

Jul 21, 2008 | Hitachi 60SX12B/13K 60" Rear Projection...

1 Answer

3 images in different colors-42 in Sony projection


So this is a rear projection TV.

Chances are the tubes are out of alignment. When cleaning or anything never move the tubes as it will be hell to get em back properly.

In the back you can take off the rear panel and move the tubes to partially re-align the picture.

This is generally followed by a model specific procedure using the remote to bring up alignment grids to finalize the picture alignment.

The reason for the 3 colours in the picture are that the rear projection units use Red, Green and Blue tubes to create the one colour picture.

All in all... When I messed mine up it took about 2 hours to set it straight again.

Now I just have to fix my flashing screen problem and i'm set.

Feb 16, 2008 | Sony Grand WEGA KDF-42WE655 42" Rear...

1 Answer

Convergence issue resolved but concave picture remains


Set will need new convergence IC's.Requires chassis pull===technical & mechanical skill mandatory.After repair,re-aligment necessary.

Sep 26, 2007 | Philips 55PW9363 55" Rear Projection...

3 Answers

How to adjust picture on projection tv


i have a 52" rca projection , and the screen looks like this ") (" on the sides can i do something to straiten it back out?

Aug 28, 2007 | Panasonic PT-53TW53 53" Rear Projection...

7 Answers

Distorted Color and geometry of Picture


I've posted this solution several times but here goes. Try setting up the convergence through the menu by accessing the convergence setup menu. If this fails to work you have a bad digital convergence box and need a tech to replace it. About $60 to $100 fix.

Nov 03, 2005 | Panasonic PT-47WX49 47" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...