Question about Galaxy Radios DX- 88HL Base CB Radio

1 Answer

Galaxy DX Radios DX88HL

Radio show to be at 10.965 on ch 5 and wont pick up anything

Posted by on

  • 1 more comment 
  • ethomas3307 Dec 06, 2008

    This is a mobile radio

  • ethomas3307 Dec 07, 2008

    it fixed a solder joint on tr41 was bad

  • ethomas3307 Dec 28, 2008

    go to cbtricks.com

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a galaxy radio and i need help adjusting it

Posted on Dec 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Galaxy DX88HL will not switch from TX to RX and light going from green to off what part do I change?


you cannot do it .Take it to a tech,they will have the proper equipment and knowledge to do it.

May 26, 2014 | Galaxy Radios DX- 88HL Base CB Radio

1 Answer

On my radio I need the settings for the knobs because other people can hear me but I only get static and cannot hear them. Thanks


Band should be E Band high/low button on high 10 khz off AM selected
To check that you have done this correctly frequency counter will read 27.185 plus or minus 5 khz. This is of course proved you have a radio that is converted for 11 meter cb frequencies.

http://www.cbtricks.com/radios/galaxy/dx88hl/index.htm Frequency Conversion is the channel expansion mod/conversion

Sep 16, 2011 | Galaxy Radios DX- 88HL Base CB Radio

1 Answer

What are the buts & nubs go to make the cb work which ones trun or push ?


Assuming you're talking about the Galaxy DX88HL, and assuming the mad has been done to reach the 11 meter band, you press the band button in, that put's you to the E-H banks, select the E/A bank which is high bank E. with the frequency counter on, it should read 26.965 for channel 1. If it reads 26.975, then your +10KHz switch is on, turn it off. you'll then be properly set for 26.965 (ch.1) - 27.405 (ch.40). You also have 5 "hidden" frequencies, these are at ch. 3, 7, 11, 15 and 19. To get to the "hidden" frequencies, go to any of the channels listed and turn on your 10KHz switch. Those frequencies are not attainable on radios that do not have a +10KHz switch or a clarifier capable of sliding that far over. To do repairs and for a full list of schematics, diagrams and so forth, I suggest this site, it has the most coverage of the Galaxy DX88HL as well as other galaxies that I've been able to find. http://www.cbtricks.com/radios/galaxy/dx88hl/index.htm .

May 25, 2011 | Galaxy Radios DX- 88HL Base CB Radio

2 Answers

I need a instuction manual and freq. cheat sheet for my galaxy dx88hl.thanks Rod


To use this radio on the CB band, you set the 10 Khz switch to OFF, and then turn the band switch to A/E.

Here is a Frequency Chart.
Here is the manual.

When the 10 Khz switch is on OFF, the band switch is E,F,G,H. When the 10 Khz switch is in the ON position, then the band switch is A,B,C,D.

So when you are on band E, which is when the 10 Khz is OFF, and the band switch is in the first position, it is on the E band.

I would get your self a Frequency counter. It makes using a radio like that much easier.

Hope this helps!

Oct 11, 2010 | Galaxy Radios DX- 88HL Base CB Radio

1 Answer

Add ch's to the Galaxy DX 959


yes very easily have done 3 of these radios myself. It is posted on the net

Mar 08, 2009 | Galaxy Radios DX-949 40-Channels Base CB...

Not finding what you are looking for?
Galaxy Radios DX- 88HL Base CB Radio Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Galaxy Radios CB Radios Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Brad Brown

Level 3 Expert

13576 Answers

Mike Charette

Level 3 Expert

1766 Answers

Are you a Galaxy Radios CB Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...