- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ink overflow --inside the printing drum there's a small circuit with two pin ( like needles)....there is one shorter than the other, they are very thin... you have to clean them with a small swab and alcohol, be very carefull, don't bend them....hope this be usefull to you :)
open the front casing of the machine 6 screws. then pull of the power supply, also the the main board of the machines then, at the back of the machines, open the case and pull out the harnest that attached on drum. then unscrew the ink hub,, then unscrew the drum from the chasis , dont forget the harnest of the position A, to pull out.
E16 indicates a motor lock with the inking motor. Disassemble the ink pump unit and check for proper rotation of the inking motor itself. This error is caused by a current overload. Also, remember to try powering on the machine while holding down the reset key to clear all error codes first.