Question about Audio Players & Recorders

1 Answer

Accidently got 120 VAC through my speaker wire connected to rec.?

I have a Harmon Kardon AVR 210 stereo reciever and when I was moving my system around the speaker wire came into contact with the electrical plug in and poped the house breaker. After reseting the breaker the machine would turn on and then turn off about two seconds later. Can you tell me what might have happened and how I can fix it if possible ?
Thank You
Shawn G.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

I guess I will help you instead of paying.
there's 3 things that needs to be replaced...transformer 1 capacitor and 2 resisters and seeing how thats a 2000 model It will cost more than if you just go get a differnt one...you can maybe sell it on ebay for 30 bucks.
Heck I have a few I can use another for parts and I do have a demo 335 its like new.
I will buy yours of you if you want so its not a total loss.

let me know zeeal2y@gmail.com

Posted on Dec 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have lost all sound from my left front speaker on my AVR 135 They are Bose spreakers The system is 13 years old. Is it woorth fixing?


anything that works well is always worth investigating for a repair
it could be a simple fuse for that side amplifier, loose , broken speaker wire
have it checked out and then decide if it is worth repairing

Sep 25, 2016 | Harmon Kardon Harman/kardon Avr 130 5.1...

1 Answer

When i turn on my harmon kardon avr 165 it shows ''Protect'' and then it turns off again?? what can i do :)


I would try disconnecting the speakers, then turn it on. If protect still shows with no speakers connected, then it needs to go to the repair shop- Might be a blown power transistor.

Oct 24, 2013 | Harmon Kardon Harman / Kardon AVR 165...

1 Answer

Harmon/Kardon AVR 146 wont stay on when hit power


Probably was damage buy a power surge, Internal damage to (Reciever)

Nov 03, 2012 | Harmon Kardon Harman Kardon Avr 146 5.1...

1 Answer

My Harmon Kardon AVR 500 sound doesn't work, I disconnected speakers, re connected & reset protection. Nos ound not even on test mode


Hi it is seem there is no output from your device. Please check the circuit components and wires for malfunction in your Kardon then. Regards

Feb 09, 2011 | Harman Kardon AVR 500 Receiver

1 Answer

I have a harmon kardon avr 120 and a samsung blu ray player.the audio is connected through the optical cable. the receiver however is only playing 2 channel audio. but my direct tv, which is also...


Check that the player's Dolby / DTS is enabled. Sometimes it is defaulted in the player to 2.0 / Stereo PCM. What model Samsung? Those Harman receivers are old favorites of mine...

Jan 06, 2011 | Harman Kardon AVR 120 Receiver

1 Answer

Harmon Kardon AVR 235 no sound


Ensure that your speakers are connected to the terminals that you have your speaker selector switch turned to.
Then check that you have your device, whether it be a CD or DVD player, or turntable, plugged into the correct input and that you also have the correct input selected on the receiver.

Dec 29, 2009 | Harman Kardon AVR 235 Receiver

1 Answer

Hooking up an amp


plug eash units sound in red whites from dvd tv main out the set speaker wires in place front ch a ok turn it on make sure ch a speakers on only select corect video input dvd ect turn it up

Feb 11, 2008 | Harman Kardon AVR 130 Receiver

1 Answer

Was using the harmon kardon avr 225 receiver and the front panel went out. .... screen display of the channel number, volume, or menu item does not work. ...


Try hooking up a yellow video wire from the back of the AVR 225 Monitor out. Should be at the end of the 7 or 8 yellow video ports on the back of the stereo. Next plug the other end into a yellow video in on a t.v. Get your remote, (Harmon/Kardon) and make sure the t.v. is on the correct video input and hit the OSD(on screen display) button on your harmon remote. There should be a setting in there that says VFD under ADVANCED menu option that allows for turning the front of your stereo lights on and off and dimming them half way also. OFF/HALF/FULL are the 3 options I believe.

If this doesnt solve it your display may have crapped out on you.

Jan 22, 2008 | Harman Kardon AVR 225 Receiver

1 Answer

Connect speaker selector to reciever


Dear fellow stereo fans:

First, you connect the wires which would go to your speakers in th respective speaker a or speaker b out. Second, connect one pair of wires from the receiver to the speaker selector. I hope this is helpful.

Nov 18, 2007 | Harman Kardon AVR 235 Receiver

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

98868 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69845 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...