Question about Vialta 370102-00001 (37010200001)

5 Answers

I have a Vialta Vidvd player and I got the keyboard for it but it doesn't resonp to it (the keyboard) is there some kind of set up procedure?

Posted by on

  • oldhippytrip Dec 08, 2008

    I have a Vialta Vidvd. It's a (made in 2000) model. I recently purchased a remote (wireless Keyboard, but it doesn't change the functions of the player. There is no way to maually change any settings without the remote or keyboard. The Vialta model is VIDVD and the keyboard is model FRC10-01 34003622. I really love the DVD player, but I would like to use all of the other functions. Where can I get the remote or the right keyboard?

×

5 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,239 Answers

HI
THERE  may be loose connection to the port.or the keybord plug in wire may be fried up....so check the input connection or any identable burned marks on wire...........thank you

Posted on Dec 08, 2008

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Contributor
  • 1,199 Answers

Try Sears parts at sears.com

Posted on Dec 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

You may want to order a new key board sounds like that one is bad

Posted on Dec 06, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,487 Answers

TRy first power off the device and unplug the keyboard for about 5 minutes then after that connect the keyborad back and power on the device and it shouild be working after that..

Posted on Dec 06, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 399 Answers

Remove the connection of the device and reconnect it.also check out for any wire got loose between them .if yes then again connect it properly.

Posted on Dec 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset the password of polycom hdx 7000


You can use the hardware restore button on the Polycom HDX system to reset
the system in one of these ways:
• Restoring configuration-Restores the configuration, which resets most
system settings to default values.

• Factory restore-Completely erases the system and restores it to the
software version and default configuration stored in its factory partition.
If you follow this procedure while a USB storage device is connected, the
system restores from the USB device instead of the system's factory
partition.
The restore button is on the front of the Polycom HDX 9000 series system, as
shown in the following figure.

1.png



The restore button is on the front of the Polycom HDX 8000 series, Polycom
HDX 7000 series, and Polycom HDX 4000 systems, as shown in the following
figure.

2.png


The restore button is on the left side of the Polycom HDX 4500 system, behind
a wire mesh screen, as shown in the following figure.


3.png


Use a paperclip to press the restore button through the wire mesh covering
that side of the system. to reset the HDX Series system we can press the restore button over 15 second.

Feb 27, 2014 | Polycom VSX 7000 Video Conference

4 Answers

Setting the date and time


After selecting 1, type in the date mm/dd/yy (it doesn't appear on the screen) then press hold/save. Then type in the time again it won't appear on the screen press hold/save. It will then return to the main screen with the correct time and date. Hope this helps.

Oct 16, 2012 | LG Ericsson LIP-8012D 12 Button IP Phone

1 Answer

Touch screen doesn't work


Reboot battery
Send phone in for repair

Oct 15, 2012 | Sony Mobile Communications Sony Xperia U...

1 Answer

Trunk lines r getting hangup always and i'm reseting the system always


Check your firmware on the system.
which kind of phone do you have connected to the stytem, are these all digital phones?, like the ones on your profile picture. do you have programming software for the system. I will then be able to give you some steps to follow for the trunk access mapping and key assignment to the phones.

Jun 01, 2012 | NEC PABX SL1000

1 Answer

I needan owners manual for a rca model # f36450 tv to download for free please


To Whom It May Concern,
I am sorry you are experiencing this problem. I will do anything i can do to help. Click Here for the link to download the manual.

Thanks,
FixYa Expert

****Please Rate Thumbs Up if you like my Solution****

Jul 17, 2011 | Vialta DUAL VIDEOPHONE STATION, RCA,...

1 Answer

I have no money


well in that case, you may have to find work if you don't have one. otherwise , kindly post question well. thanks

Jul 13, 2011 | Answer Ojo Shadow 900 Video Conference

1 Answer

Unable to install polycom cx5000 on one pc, in device manager it's listed but the drivers are missing


How to install the polycom cx5000??? send me step by step procedure???? to my mail id...

paramaguruece@gmail.com

Jan 04, 2010 | Polycom CX5000 - Video conferencing kit...

1 Answer

I can't connect to my Dad


Joe,

Please have your dad check his installation, does he has a fax machine or modem that is also connected to the same phone line. Have him check the connection to the Beamer unit, "line-in" has to connect and be the first device to the wall jack and "phone in" connected to the phone set he used to initiate or receive the video call. If this does not solve the problem, please email your phone number to support@vialta.com for help.


regards

Support

Oct 19, 2007 | Vialta Beamer Videophone (11300010) Video...

1 Answer

Beamer BM-TV Vialta


Daniella,

Do you have a CE version of the BM-TV, in UK the TV system is PAL if you bought your Beamer in U.S. chances are you have a NTSC version. As far as "broadband", are you refering to a DSL service or VOIP? Please email support@vialta.com for further assistance.


Support

Aug 21, 2007 | Vialta 370102-00001 (37010200001)

Not finding what you are looking for?
Vialta 370102-00001 (37010200001) Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vialta Conference Phones Experts

pbxinc

Level 2 Expert

61 Answers

Danny Nagdev

Level 2 Expert

47 Answers

David Burbee
David Burbee

Level 2 Expert

1868 Answers

Are you a Vialta Conference Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...