Question about Nvidia GeForce 6200 AGP Graphic Card
He didnt push the card all the way down simple open it back up pull card out and "you" push the card back into slot
the bar on should be flush with case
i hope your friend didnt put it on something that had electrical charge that staticed the card to death
but more than likely he didnt push the card down all the way make sure monitor cable is tight and flush with card in back of comp
if you still dont get picture try another monitor you could have damaged something in monitor in your move
Posted on Dec 06, 2008
You should enter Bios setup when restarting and check that it says AGP or PCI for video display. You can then go to Start then Run and type in msconfig. Go through the list for the startup menu and make sure that NVIDIA is displayed with a checkmark.
When you installed the new driver, also make sure that you disabled the default VGA driver too. You may have to check that out. If both are running there will be conflict. Any questions, please don't hesitate.
Posted on Nov 18, 2007
Tips for a great answer:
May 06, 2011 | Nvidia GeForce FX 5200 Video Card Graphic
May 22, 2010 | ASUS GeForce4 MX440 (64 MB) AGP Graphic...
Feb 14, 2010 | Graphics Cards
Nov 26, 2009 | Graphics Cards
Sep 19, 2009 | Graphics Cards
Apr 10, 2009 | Intel XFX GeForce2 MX400 (64 MB) Graphic...
Apr 05, 2009 | Nvidia Riva TNT2 16 MB Graphic Card
Feb 28, 2009 | ATI RADEON X600 Pro, (128 MB) PCI Express...
May 12, 2008 | Nvidia GeForce2 MX400 Graphic Card
Feb 23, 2008 | Graphics Cards
Nov 28, 2010 | Nvidia GeForce 6200 AGP Graphic Card
Nov 21, 2010 | Nvidia GeForce 6200 AGP Graphic Card
198 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: