Question about Universal Remote Control Dish Network IR/PVR Remote

Open Question

Wintal PVR-X10A Remote -compatible or code

The remote for my Wintal PVR-X10A set top box died this week,
and I'm hoping you maybe able to tell me the code need to use another remote or one that I can buy that is compatible.

Thankyou for your time
Regards

Leonie Esh

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: codes for universal remote control

Press an hold button S (if you press it once shortly, that will enter the shift mode). Pressing S for 2-3 sec, enters the Setup mode. ("SETUP CODE" appears on LCD) Use the cursor buttons arround the OK button. Try to understand the menu system. You can browse the code list on the LCD. They are grouped by brand. No more information in the code list printed, its the same list grouped by brand... You must try the codoes in the desired group while one is corect... (Or you can try one another brand.
Originally the box contains one code list, and one users manual. My package contained only the code list, and no users giude :))

Sorry for my poor english.

Posted on Feb 08, 2008

  • 30 Answers

SOURCE: I need a manual for my all in one remote.

First hold down the SET key (like it was a Shift Key) and then press the TV key, then release the SET key and then the TV key. Then enter the code.....

Posted on Jul 01, 2009

chitownbob45
  • 316 Answers

SOURCE: need a remote code for universal remote

try 0053

Posted on Oct 04, 2009

  • 212 Answers

SOURCE: i was wondering if anyone could help in two

Hi,
Here is a link to the codes, but I suspect you already have them and your devices aren't listed.... http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/innovage/jumbo-manual.zip&area=other

So, you can manually code your jumbo as follows;

Turn on the device you wish to match with your remote. Aim the remote at the device and press and hold the Code Search button in the upper left of your remote for at least 3 seconds until the LED light on the remote turns a solid red. Press the button on the remote for the item you want to program (TV, DVD, etc.). The LED light should blink once and then remain a solid red.

Press the On/Off button slowly until the device you want to program turns off. The LED light will blink once each time you depress the On/Off button. When the device you want to program turns off, press the ENTER button. The LED button will turn off and the code for that device will be stored in your remote.

Posted on Jan 12, 2010

  • 1 Answer

SOURCE: need code for Legend LHD3 - for my universal remote

Just noticed your post when searching same problem. Legend useless.. I have lost an RC for one of the LHD3's I have, asked them if they could supply a new one at a price.No!
However the Logitech Harmony universal remote control allegedly will work, but I suspect this is another one of the con jobs that Google, eBay etc propagate..they say their paid advertiser can supply something but it will turn out to be false. Too late once you have paid $50+ and find there is no code or you have to try and steo through 10,000 possible four digit code to find the one that works.. and yes i found several codes on a URC last night even that turns the LHD3 on/ off, but not even will step the channels. Telict

Posted on May 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Teac remote died. Need 4 digit code for universal remote (one for all brand) to make Teac DVD PVR combo to work. Teac DVS1000HD


2918,2993. Check these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box.
http://electronicshelponline.blogspot.com/
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electrohelponline.blogspot.com/

May 27, 2015 | Universal Remote Controls

1 Answer

Is there a four digit code for the Sansai URC-501A universal remote to operate the Wintal PVR10HD?


If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by brand name to your TV.

Sep 06, 2014 | Remote Controls

1 Answer

Where can I buy a replacement Wintal PVR-X10A remote control? All help will be much appreciated. DeeCee.


If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its user manual. Never accept a remote control, that hasn't both of this. If you see the site by "MOSAIC" or "Magazine" view, will make surf easier.
http://electrohelponline.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops.
Check this link too. http://remotesearch.blogspot.com/

Apr 25, 2014 | Remote Controls

1 Answer

Need remote control codes for Neulion set top box.


This seems to be a very rare brand name. If you wish to get setup code list to some popular brand remote control, check this link.

Feb 23, 2013 | Remote Controls

4 Answers

Codes for oneforall


It is my pleasure to guide you.

Look through these. I hope what you need is here.

Manufacturer's Codes
Setup Codes For Cable Boxes
Setup Codes For Cable Box/PVR (or DVR) Combos
Setup Codes For DVD Players
Setup Codes For DVD Player/VCR Combos
Setup Codes For PVRs (or DVRs)
Setup Codes For Satellite Receivers
Setup Codes For Satellite Receiver/PVR (or DVR) Combos
Setup Codes For TVs
Setup Codes For TV/DVD Player Combos
Setup Codes For TV/VCR Combos
Setup Codes For TV/VCR/DVD Player Combos
Setup Codes For VCRs

Please post back which one is yours with Serial number and Mfg.

Setup Codes for DVD Players such as Magnavox 0503, 0539, 0646, 0675, 0821,1268

Jun 05, 2011 | One For All URC4220 Remote Control

1 Answer

Hi We have a DTB-H550F set top box that works perfectly fine except for the fact the remote has died. What options do we have? Can we get a remote ? Thanks


Their doesn't appear to be anywhere you can buy a Direct Replacement Remote for this Model. The only option therefore is to buy a Universal Remote Control but these aren't always guaranteed to operate a particular model and you have to go through the process of finding the correct code and even then it may not be 100% compatible. On the plus side they are fairly cheap so probably worth giving it a try.

Jun 02, 2011 | Samsung TV Set Top Box Remote Control

2 Answers

Need code for magnavox tv urc-4021boo


Hi, the codes you have requested;

Magnavox - 0054, 0706, 0030, 1454, 1254

Instructions to program code:

1. Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.

2. On the remote control,press a device key once (i.e., VCR/PVR, DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press VCR/PVR once.After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions. NOTE: To program control of a DVD Player,DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD once.After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions. NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,then release SET.

4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice. NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.

5. Aim the remote control at the device and press POWER once.The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works.

Feb 12, 2011 | One For All URC-4021 Remote Control

1 Answer

I have a Motorola QIP6200/64xx DVR set-top box thru Verizon


The best code I could find was "007"

"210" kind of works, but can't compete with Mr. Bond.

After programming "007", if there are any features of you FiOS remote that do not work on the HK AVR 354 remote, simply follow the HK AVR 354 manual instructions to "learn" additional commands. See the last paragraph on page 31 through letter "e" on page 32.

Cheers,
Jeremiah Pattison

Keywords: Harman Kardon AVR 354 remote code to control FiOS DVR PVR STB cable box QIP 6416

Oct 28, 2009 | Motorola Remote Controls

1 Answer

Remote control code


depending on the remote you have from rogers but the newest remote has 5 device's across the top we call it a 5 button there is a 3 and a 4 and a fat 5 button that is the old pvr remote all are pretty much the same in setting up easiest way is on 5 button remotes select the device ie. tv pres and hold setup untill light flashes 3 times enter 9-9-1 the with the tv on press ch+ button untill tv turns off once tv is off press setup to lock in the code test it by pressing tv then pressing power should turn tv back on if not repeat previous steps untill you get the right code some tv models are not compatible with the rogers remote 3 and 4 button pretty much the same except insted of a setup button you have to press and hold tv and select at the same time untill light flashes 3 times press 9-9-1 then press tv button untill tv turns off press select to lock into place

Dec 29, 2007 | GRIFFIN TECHNOLOGYTotal Remote-PDA Remote...

Not finding what you are looking for?
Universal Remote Control Dish Network IR/PVR Remote Logo

Related Topics:

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Universal Remote Control Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Are you an Universal Remote Control Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...