Question about Kenmore 40494 / 40495 / 40499 Electric Single Oven

1 Answer

I cant get my oven to unlock its door

After cooking at 425.  I went to hit the "broil button" and got the "clean" button instead.  I immediately hit Cancel and the cleaning stopped before it even started but now it wont unlock and let me at my dinner!  Help!  Starving.....Michele

Posted by on

  • funfactory Dec 06, 2008

    I was able to disable the automatic lock w/o waiting for it  to cool by unplugging  for 10 sec. and plugging back in!. Phew! 
    Full and happy now~ Michele  :  ) 

  • nbhunt2 Dec 07, 2008

    I was not cleaning my oven and the door is just locked and can't open oven door.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

You will needto let it go through the cleaning process to comeplete the cycle for the door to unlock,thats about the only way its going to unlock now

Posted on Dec 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool super capacity 465


Seems the thermostat is malfunctioning...thus when baking at 500..thats quite high...it keeps getting hotter past that point to where the oven thinks its in self cleaning mode. Also seems like the problem because when it cools down your allowed to use it again. There is no way to test it with an ohmmeter. Just remove and replace.

Nov 30, 2013 | Ovens

1 Answer

I have a ken more elite double oven. I set it for 425 for 30 min and was to turn it back. I am cooking a chicken. I didn't have my glasses on and accidentally turned the flex and clean on. Now


sure you'll be able to open it but your chicken will be burnt to a crisp. actually, it may not if you just hit cancel right away after starting the self clean feature.

Nov 14, 2012 | Ovens

1 Answer

Cant get the fan oven to heat up is this a element problem or a program problem.


Hi.

If the fan assisted cooking programs are the only one not working and the oven is otherwise heating and cooking, then problems can be:

Fan motor.
Wiring harness to fan.
The relay that activates the fan. That is usually part of control module.

If instead the fan oven is not heating at all, then check if problem is with broiling, baking, or with both. If the problem affects both broiling or baking replace the temperature probe. before replacement the probe can be tested using an Ohm meter. The probe will read about 1080 Ohms at room if good.

If problem is only with one of baking/broiling functions, then test elements or valve/ignitors, depending if oven is gas or electric.

Regards.

Ginko

Sep 18, 2011 | Electrolux Ovens

1 Answer

I was able to clear the locked door message, and get over working following steps above, but cannot get the lock mechanism to release, and therefore cannot close the door


Check out these steps at the following link... http://www.geappliances.com/search/fast/infobase/10004586.htm

Range - "LOC DOOR" flashes in the display

If "LOC DOOR" is flashing in the display of your range or oven, and the self-clean cycle has not been selected, follow the steps below to reset your control:

Motorized Switch
    1. With the door open, locate the door jamb switch on the face of the oven. It will look like a small black post or dowel.
    2. Push it in until the oven cavity light goes off, indicating that the oven believes the door is closed.
    3. While you hold the door jamb switch in this position, complete the following steps.
    4. Press the Clean pad, wait 10 seconds.
    5. When the cycle initiates, press the clear/off or cancel pad immediately to cancel it.
    6. Wait 10 seconds for the display to clear.
    7. The door should unlock and there should not be a need for service.
Manual Switch
    1. Press the Clean pad.
    2. Close the door.
    3. Slide the latch to lock the door.
    4. Hit the cancel button immediately.
    5. Unlock the door.

Range - "LOC DOOR" flashes in the display

If "LOC DOOR" is flashing in the display of your range or oven, and the self-clean cycle has not been selected, follow the steps below to reset your control:

Motorized Switch
    1. With the door open, locate the door jamb switch on the face of the oven. It will look like a small black post or dowel.
    2. Push it in until the oven cavity light goes off, indicating that the oven believes the door is closed.
    3. While you hold the door jamb switch in this position, complete the following steps.
    4. Press the Clean pad, wait 10 seconds.
    5. When the cycle initiates, press the clear/off or cancel pad immediately to cancel it.
    6. Wait 10 seconds for the display to clear.
    7. The door should unlock and there should not be a need for service.
Manual Switch
    1. Press the Clean pad.
    2. Close the door.
    3. Slide the latch to lock the door.
    4. Hit the cancel button immediately.
    5. Unlock the door.

Nov 24, 2010 | GE Profile JTP18 Electric Single Oven

1 Answer

Model GBS307PDQ5: Oven preheated to 425 degrees.


F3 usually means, that the oven temp. sensor is bad and one need to replace it.
The fact, that it's not heating tells me, the fuse in the back also needs to be replaced (requires pulling out).

Whirlpool oven repair orange county, ca

Feb 06, 2010 | Ovens

1 Answer

Accidently started clean, food inside,hit cancel,can't open


you would have to disassemble the cook top in order to get the the locking mechanism to manualy unlockit

May 01, 2009 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

How can i quit cleaning oven?


During the self clean cycle, oven temp will exceed 900 degrees F. At these temps, if you opened the door, the food inside would immediately catch on fire when the supply of oxygen hit it. When you turn your self clean cycle off, the oven door will remain locked until the internal temp drop below aprox. 550 degrees F for your safety. Once the oven cool below this temp, you will be able to start using the bake or broil again. This should be a Fix-Ya for your oven.

Dec 29, 2008 | Kenmore 40494 / 40495 / 40499 Electric...

2 Answers

Frigidaire gallery self cleaning convection oven


Press and hold the "clean" button for 5 seconds.

May 11, 2008 | Ovens

2 Answers

Self cleaning


Maryann, try shutting the breaker off for 5 minutes and see if the door unlocks. Im assuming the oven has cooled down. If that doesn't work try holding the cancel and broil pads for 3 seconds. This will put it into the quik test mode. Once in this mode press the clean button. This should toggle between lock and unlock. Don't know if this will work for you but it's worth a try..Catriver...post back.

Oct 12, 2006 | Jenn-Air JJW9330D Electric Single Oven

Not finding what you are looking for?
Kenmore 40494 / 40495 / 40499 Electric Single Oven Logo

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Ovens Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Kenmore Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...