Question about HP Photosmart 2410 All-In-One InkJet Printer

2 Answers

Missing cords I lost all the cords that go with the printer in Hurricane Ike. What do I need to get my printer back up and running? Thanks. elle

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer got voted for 20 times.

  • Expert
  • 159 Answers

Here's your manual:

Parts are available on the left side of the screen. You need four cables. One is tough.

You need to find the *exact* model number of your printer -- look for a sticker on the back with a bar code. Something says Q80somethingsomethingsomething. That's it. That will determine which thing you get.

OK, so the three most common cords:
1) Standard PC power cord, three-prong outlet to that boxy kinda plug that goes into your computer's power supply. HP gave you a 3 foot cord for that.
2) Standard USB to accessory cord -- I believe they call it a Type A to Type B.
3) Standard telephone cord (not the handset, but between the phone and the wall, for your fax machine).

And the tough one: The power module.
For each specific model of printer listed, I found a photo of one part that can no longer be ordered (0950-4466) and a part that can be ordered that has no photo (Q7310-60003). I don't know if that "Q" part is right. HP quotes some $32.50 plus shipping.

Now, if you type the 0950 number into eBay, you see some power supplies for about half that price (possibly used) that even include the fatter computer-style power cord so you're saving money there.

The other cords will be pricier at the big chain stores -- unbelievably so. NewEgg, for example, lists an A-B USB cord for $2.99 plus shipping. I've seen a similar product for $20 or more at Staples.

The phone cable you may have hanging around already.

Good luck, and I'm sorry for your losses!

Posted on Dec 06, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,061 Answers

Http:// go here and order everything you need.if we may assist you further feel free to contact me or one of our other techs.RICHARDM69

Posted on Dec 06, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hurricane names

Mitch (1998), Katrina (2005), Wilma (2005), Ike (2008), Gustav (2008), Irene (2011), Jova (2011), Matthew (2016), Hermine (2016), Otto (2016), Irma (2017)

Sep 13, 2017 | Miscellaneous

3 Answers

Bernina artista 180

Yes this still can be fix but better if you can take it to a repair center near you so they can really diagnose the problem with this device and probably there will be some parts that needs to be replace....

Oct 31, 2008 | Bernina Artista 180

1 Answer

Red light comes on nothing ells

The Designjet 1050C Plus does not need the hard disk drive to boot. When only the red light comes on, the firmware ROM is probably missing. Open the small panel on the back of the plotter to access the memory and ROM slots. If the FW ROM and memory are missing, you will need to buy them to make the plotter boot. They can be purchased at:

Oct 01, 2013 | HP DesignJet 1050c plus InkJet Printer

1 Answer

Low water pressure on cold water cycle only. Need to know how to take out filter screen to clean. Lost water pressure during Hurricane Ike and have had this problem for a year. Haven't been able to find...

take off the cold water line from the valve on the wall. be sure and turn off the water first. the screen on the hose end may be plugged with rust or some debris.

Jun 28, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Need to install Lexmark 4350 all in one but lost disk

If you want to purchase a replacement disk.

Contact Lexmark here, to see if the disk for your printer is available.

If you do not have the disk you can also download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:

  • Unplug printer USB.
  • Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
  • Download driver from website, or use the disk and run the install file.
  • Follow driver installation wizard.
  • Plug back printer when prompted from installation wizard.

Apr 09, 2009 | Lexmark P4350 All-In-One InkJet Printer

1 Answer

Lost power cord

You should try matching up the amperage (A) and voltage (12V) with a universal adapter. You can find at radio shack or walmart. Make sure you get as close to possible to correct amps, anything more than the correct amps can fry your tv. Volts doesn't have to be exact

Dec 13, 2008 | Polaroid TDX-01930B 19 in. LCD HDTV

1 Answer

Blinking timer light - no power

Replace the power board and it should work, it got a spike from the unstable voltage of the generator

Dec 15, 2017 | Televison & Video

1 Answer

Lost owners manual when tree from hurricane IKE.everything is ruines.please help me.

Ok Here is the link to all the Navman GPS Devices Manuals....just pick your model number from the list...Good Luck and let me know if this helped


Oct 20, 2008 | Navman GPS

1 Answer

Don't know how to remove drip tray

hi there,

the drip pan is usually accessible through the front behind the kickpanel. the kickpanel is attached with 2 screws. if you remove the kickpanel, you'll be able to pull out the drain pan.

Oct 02, 2008 | Refrigerators

1 Answer

Ice maker trobleshooting

We lost power due to hurricane Ike and now that the power is back on the ice maker is not working. Is there a reset button or what needs to be done to get it working again?

Aug 10, 2008 | Kenmore 22.0 cu. ft. Side-By-Side...

Not finding what you are looking for?
HP Photosmart 2410 All-In-One InkJet Printer Logo

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

Ben Johnson

Level 3 Expert

685 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides