- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Seems the menu button of the monitor is stuck. Turn off the monitor and the with the main power supply. Spray an air duster or w40. then try to push one after the other and check it the button is working much better now.
If the monitor does not have a symbol (similar to the letter 'C' with a dot in the middle), the cheapest digital multimeter can be used on the 'diode' or 'continuity' setting to check the input.
If the meter reads between 600 and 900, you are measuring the forward voltage drop of a protective diode.
Any other reading will mean that the positive probe of the meter is on the positive part of the connector.
i.e. If you are placing the positive meter lead on the center pin and the negative on the shell and it reads 600-900, then the power supply needs to have the negative applied to the center pin and the positive on the shell.
If the negative lead is held on the center pin and the positive on the shell and the reading is 600-900 then the center pin is the positive input and the shell the negative.
The readings shown above mean that you are measuring the forward voltage drop of a diode meant to protect the unit against improper polarization and it will probably either die or ruin the adaptor if misapplying the polarity.
You can buy such a meter at electronics or auto parts stores for under $20 US.
So the old power supply doesn't have the output voltage, current and polarity noted on the label? What a ripoff! *grin*
Did you look on the case near where it plugs into the monitor? Sometimes that will tell you the voltasge and polarity.
Poliarity? Get that one wrong and the monitor could be cooked instantly! But it's usually positive.
I found a completed eBay listing that had this info:
"the power supply which the seller used to power up this Planar Flat Panel is inventoried as follows: ViewSonic 12V Power Adaptor Model # SYS1126-5012"
I looked that one up, and it's listed as 12V at 4.17A. PC Hub has them for $28.62: