Question about NorStar M7324 Telephone

1 Answer

Can't get my CAP buttons to work

I have a M7324 phone and just got an CAP for it. The number is NT8B41FA-03. I am able to program all the buttons on my phone but can't program any of the buttons on my addition. One phone line is connected from the main phone to the addition and then the assition is plugged into the wall so i know that there is power running through becasue my phone rings but I can't program the buttons.

Posted by on

  • CFDC May 11, 2010

    We have never used a power supply, but our CAP just suddently stopped working a few weeks ago. Any idea how to get the buttons on the CAP to work again.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

A separate power supply is needed to run the CAP unit. Was there one installed or did the CAP just get plugged in?

Posted on Jan 05, 2009

  • nicole_richa Aug 27, 2010

    I have same problem, our CAP just plugs in to the main M7324 unit and the wall jack, how do I get power back to the CAP unit to work

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to assign a dn number to M7324


press Feature *0 (button inquiry) then press the intercom key.

When a set is installed it automatically gets an intercom #

Mar 19, 2014 | NorStar M7324 Telephone

1 Answer

How do i forward calls to an outside line on Nortel M7324


You can forward an extension that is not used at all, and has the lines assigned to ring that you want to forward to an outside number. In programming have the extensions set to forward on busy to the external number using 9+ the number desired. When you leave for the afternoon, take the handset off the phone, and replace it when you return. NOTE THIS EXTENSION MUST NOT BE USED BY ANYONE -- IF THIS EXTENSION IS BEING USED AND A LINE RINGS IN IT WILL BE FORWARDED OUT.

Mar 19, 2013 | NorStar M7324 Telephone

1 Answer

Norstar m7324 won't come off night ring


Is the button still programmed?
Do F871 in meantime....F#871 on older systems helps too or just F87.

Program button:
F*3
button
Feature
871

Jul 23, 2012 | NorStar M7324 Telephone

1 Answer

Program personal speed dial numbers on a NorStar M7324 Telephone


For external numbers press FEATURE *1, then press the button you want to store the number on, then enter the phone number using the dialpad.
For internal numbers press FEATURE *2, then press the button you want to store the number on, then enter the extension number using the dialpad.
To determine what is currently programmed on a button, press FEATURE *0, then the button to identify and the display will show what feature or autodial number is programmed on the button. If the button is a line button or line pool button, you will not be able to clear it through user level button programming. System level programming must be accessed to change line appearances.

Mar 02, 2011 | NorStar M7324 Telephone

1 Answer

Nortel M7324 CAP stops working after changing UPS


The buttons will all have to be reprogrammed. Try this:
Press "Feature * 2", then press the button to be programmed, and enter an extension number. You will have to do this for each button.
Alternatively, you can unplug the phone for 1 minute, and plug it back in. The lights will start to flash on the phone, and stay solid on the KLM. When the lights begin to flash on the KLM, simultaneously press the bottom 2 buttons on the left-side and the bottom 2 buttons on the right-side of the KLM. This will cause each button to light momentarily from the top-left to the bottom-right, and will program the buttons, in ascending order, automatically from the first extension in the system until it uses all available buttons on the KLM.
Hope this helps!

Nov 25, 2009 | NorStar M7324 Telephone

1 Answer

MY TRANSFER BUTTON TRANSFER TO LAST NUMBER DAILED


sounds like the programming for that button was changed to last number redial. To re- program the button, press feature *3, press the button labeled transfer, and press feature 70 (transfer).

Sep 18, 2009 | NorStar M7324 Telephone

1 Answer

I have a Norstar M273724, and I am having one HECK of a time trying to program my personal speed dials. Any ideas?


You need to use Feature *1, Then press the button you want to program, dial the number, and press Rls or Release

Jun 11, 2009 | NorStar M7324 Phone

1 Answer

Need to connect NT8B60CA SAP to M7324 CAP module


We actually dug up a copy of the SAPS module install card from somewhere on our premises. No further assistance needed. Thx.

Jan 30, 2009 | NorStar M7324 Telephone

1 Answer

Line 3 and 4 are not programmed


You need to go into main programming of the system, and set the phone to access those lines. First ID the 2 new extensions. Do this by going to the phone, and pressing the Feature Key "Button with a little black globe", * and 0. then press the intercom button. This will show you the extension number. Press release "Red button with the phone and arrow downward". Then Press feature key "Button with the black Globe" "**266344" and again "**266344" go to terminals and sets. next to the buttons, you will see triangles , 3 for a while and 4 some times. The keys just next to them are your scrolling and enter keys. Scroll to "Terminals and Sets", press the enter button "Top right triangle" and enter in the extension and enter. then scroll to Line Access, enter, line Assignment. For each line, you have to change it to either Appear and ring, appr or unassigned. Set to appear and ring or appr. Do is for each extension to want to have acces to those lines.

Apr 27, 2007 | NorStar BCM-M7324 Corded Phone...

Not finding what you are looking for?
NorStar M7324 Telephone Logo

Related Topics:

428 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

858 Answers

kakima

Level 3 Expert

98843 Answers

dan4261

Level 1 Expert

14 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...