Question about GE JVM1440 Microwave Oven

1 Answer

Combination 1.0 cu.ft. Microwave/Covection stopped working....

I ahve a Daewoo combination microwave/convection oven. The other night I was reheating a hamburger patty and it worked fine. I decided to reheat another one and noticed taht the the microwave stopped after only 16 seconds, I reset the timer and it started for about a second or two then diferrent numbers came up pn the display, dissappeared and then shut off. I tried to set timer again but the start button did not work. I still get a display on the screen, able toset time etc., but the start button does not work. Is this the fuse? Where is the fuse located? I'm in San Diego county, are there any service techs in this area? Thanks for all of your assistance. Oh and by teh way I purchased this unit on ebay, brand new, it came in its original box and I've only used it a few times. I don't think it is still covered by the warranty however. Thanks again!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 38 Answers

Try leaving umplugged 30 min.then try .

Posted on May 24, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After I replaced the lower coil in my Frigidaire oven, the self cleaning part does not work.


Hi Carol Eggers, thank you for your inquiry!

I understand that your wall oven is not allowing you to perform self-clean after you replaced your bake element. It sounds like it could be an issue within the control panel or sensor inside of your oven. I would recommend having a professional come out to properly diagnose your appliance. -Matt

Sep 22, 2014 | Frigidaire FPMC2785KF Professional 27...

1 Answer

Frigidaire microwave


Check fuse inside microwave oven (usually 8-10-12 A) on power supply board or main board, depending on model.

Dado

24927659-yz4y41jl0hlv0zh3a1frmczo-4-0.jpg

Aug 10, 2014 | Electrolux Frigidaire Gallery 30" 1.7 cu....

1 Answer

Whirlpool recall


Hi,

I just check and didn't find any posted for this model, are you having issue? What issue are you having? More information please. Thnaks

I’m happy to help further over the phone at https://www.6ya.com/expert/gere_bf68e6055dd61249

Aug 02, 2014 | Whirlpool Stainless Steel 1.9 Cu. Ft....

1 Answer

Panasonic NN-H965WF Microwave oven


We recommend the microwave is evaluated by an authorized service center by using www.panasonic.com/repair Welcome to Panasonic Online Repair

Apr 13, 2014 | Panasonic Microwave Ovens

1 Answer

Sensor error with full plate of food, not with smaller amount


may be an incorrect setting capacity, try to reset time and amount capacity of food to be reheated.

Nov 16, 2017 | Frigidaire GLMV168K Microwave Oven

1 Answer

Monday evening I used it was for heating hamburger buns. I used sensor reheat and it worked perfectly. Tuesday evening I wanted to defrost a small beef roast. It worked for 1 minute then shut down...


try unplugging it. or the probe might be defective. another trick is slamming the door when shutting it, if this works it;s a micro switch thats gone bad or out of alignment

Jul 14, 2017 | Panasonic NN-H504WF Microwave Oven

1 Answer

GE Profile Performance Convection/Microwave Problem Heating


Either magnetron, capacitor, diode pack or transformer has failed causing a fuse to blow.

Jul 13, 2017 | General Electric Microwave Oven

Not finding what you are looking for?
GE JVM1440 Microwave Oven Logo

Related Topics:

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9125 Answers

vince

Level 3 Expert

1216 Answers

D. E. Hev

Level 3 Expert

1187 Answers

Are you a GE Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...