Question about StarTech.com StarView SV211K 2-port KVM Switch

1 Answer

I have a starview3 and it seems i need a code to activate it so i can watch it again i was told it would b a one off payment

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 54 Answers

Subject: Star View 3 The Box Suoper when channels discappear ;o)
Hiya this is what I did & hopefully it'll work for U too - 1) Deleted all th channels & reset 'factory settings' by entering the code 0000, turned th box off waited a couple of minutes & turned it back on !!! 2) You may have to redownload channels so reconnect yr box to the computer & follow the link below (But try without doing this & goto stage 3) first & please let me kno if that works :- http://www.4shared.com/file/76886028/fd4ac296/GTRom_the_box_Super_8102e_081129.html?err=no-sess ) & press download !!! 3) ReConnect & Turn box back on; goto menu & press 1570 to get into the CASS SYSTEM & turn EMU on Reinstall channels & voila - no payment needed

Posted on Jun 23, 2009

  • 5 more comments 
  • Stace Godsell Jun 23, 2009


    Subject: Star View 3 The Box Suoper when channels discappear ;o)






    Hiya this is what I did & hopefully it'll work for U too -

    1) Deleted all th channels & reset 'factory settings' by entering the code 0000, turned th box off waited a couple of minutes & turned it back on !!!

    2) You may have to redownload channels so reconnect yr box to the computer & follow the link below (But try without doing this & goto stage 3) first & please let me kno if that works :-

    http://www.4shared.com/file/76886028/fd4... )


    & press download !!!

    3) ReConnect & Turn box back on; goto menu & press 1570 to get into the CASS SYSTEM & turn EMU on

    Reinstall channels & voila - no payment needed ;o)

  • Stace Godsell Jun 24, 2009


    Hiya this is what I did & hopefully it'll work for U too -

    1) Deleted all th channels & reset 'factory settings' by entering the code 0000, turned th box off waited a couple of minutes & turned it back on !!!

    2) You may have to redownload channels so reconnect yr box to the computer & follow the link below (But try without doing this & goto stage 3) first & please let me kno if that works :-

    http://www.4shared.com/file/76886028/fd4...
    )


    & press download !!!

    3) ReConnect & Turn box back on; goto menu & press 1570 to get into the CASS SYSTEM & turn EMU on

    Reinstall channels & voila

  • Stace Godsell Jun 24, 2009


    Hiya this is what I did & hopefully it'll work for U too -

    1) Deleted all th channels & reset 'factory settings' by entering the code 0000, turned th box off waited a couple of minutes & turned it back on !!!

    2) You may have to redownload channels so reconnect yr box to the computer & follow the link below (But try without doing this & goto stage 3) first & please let me kno if that works :-

    http://www.4shared.com/file/76886028/fd4...
    )


    & press download !!!

    3) ReConnect & Turn box back on; goto menu & press 1570 to get into the CASS SYSTEM & turn EMU on

    Reinstall channels & voila

  • Stace Godsell Jun 28, 2009


    Hiya this is what I did & hopefully it'll work for U too -

    1) Deleted all th channels & reset 'factory settings' by entering the code 0000, turned th box off waited a couple of minutes & turned it back on !!!

    2) You may have to redownload channels so reconnect yr box to the computer & follow the link below (But try without doing this & goto stage 3) first & please let me kno if that works :-

    http://www.4shared.com/file/76886028/fd4...
    )


    & press download !!!

    3) ReConnect & Turn box back on; goto menu & press 1570 to get into the CASS SYSTEM & turn EMU on

    Reinstall channels & voila

  • Stace Godsell Jun 28, 2009


    Hiya this is what I did & hopefully it'll work for U too -

    1) Deleted all th channels & reset 'factory settings' by entering the code 0000, turned th box off waited a couple of minutes & turned it back on !!!

    2) You may have to redownload channels so reconnect yr box to the computer & follow the link below (But try without doing this & goto stage 3) first & please let me kno if that works :-

    http://www.4shared.com/file/76886028/fd4...
    )


    & press download !!!

    3) ReConnect & Turn box back on; goto menu & press 1570 to get into the CASS SYSTEM & turn EMU on

    Reinstall channels & voila

  • Stace Godsell Jun 30, 2009


    Subject: Star View 3 The Box Super when channels discappear ;o)

    1. Press menu then Factory Setting & Enter code 0000 to reset.

    2. Exit to main menu & enter 1570 to get into the CASS SYSTEM & turn EMU on

    3. Reinstall channels (Goto Installation, Cable network (try TW first & if no channels try NTL then C & W and so on - I'm with Virgin & used the setings for TW) & Voila ;o)




    Nb: You may have to redownload channels so reconnect yr box to the computer & follow the link below

    http://www.4shared.com/file/76886028/fd4...



    & press download !!!

  • Stace Godsell Jul 06, 2009

    Not 100% certain that this'll work but this is what I did & hopefully it'll work for you too - good luck :-








    Subject: Star View 3 The Box Super when channels discappear ;o)

    1. Press menu then Factory Setting & Enter code 0000 to reset.

    2. Exit to main menu & enter 1570 to get into the CASS SYSTEM & turn EMU on

    3. Reinstall channels (Goto Installation, Cable network (try TW first & if no channels try NTL then C & W and so on - I'm with Virgin & used the setings for TW) & Voila ;o)




    Nb: You may have to redownload channels so reconnect yr box to the computer & follow the link below

    http://www.4shared.com/file/76886028/fd4...



    & press download !!!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loseof channels on starview3 moves


due to virgin trying mess up frequencies so i followed i instruction log on this site and bookmark it
http://dooby2oons.googoolz.com/the-box-usb-starview-4-f11/starview-the-box-usb-update-guide-t253.htm
has all infor you need

Mar 23, 2010 | StarTech.com StarView SV211K 2-port KVM...

1 Answer

Codes for chorus on the starview3


hi guys, for all who keep having problems with eurovox fixes updates and codes download my toolbar please its free, there is a eurovox tab on it and it will gie u access to daily updated codes fixes n firmware etc http://allsportsforus.OurToolbar.com/

Oct 12, 2009 | StarTech.com StarView SV211K 2-port KVM...

1 Answer

S/box won,t work


a friend fixed it for me. he installed a new firmware and factory setting that,s all i can remember hope this helps

Dec 25, 2008 | StarTech.com StarView SV211K 2-port KVM...

1 Answer

Eurovox ex1000 sl starview3


4.12.08.
ntell.
0=3F B8 36 62 72 E5 E2 76
1=35 5E D6 40 6E AA 99 41
tw
0=C0 F6 61 87 91 F9 67 57
1=F0 83 35 E5 28 40 49 B2

Dec 03, 2008 | StarTech.com StarView SV211K 2-port KVM...

2 Answers

Starview3 digital receiver codes for cardiff south wales ntl


Subject: Star View 3 The Box Suoper when channels discappear ;o)
Hiya this is what I did & hopefully it'll work for U too - 1) Deleted all th channels & reset 'factory settings' by entering the code 0000, turned th box off waited a couple of minutes & turned it back on !!! 2) You may have to redownload channels so reconnect yr box to the computer & follow the link below (But try without doing this & goto stage 3) first & please let me kno if that works :- http://www.4shared.com/file/76886028/fd4ac296/GTRom_the_box_Super_8102e_081129.html?err=no-sess ) & press download !!! 3) ReConnect & Turn box back on; goto menu & press 1570 to get into the CASS SYSTEM & turn EMU on Reinstall channels & voila

Dec 02, 2008 | StarTech.com StarView SV211K 2-port KVM...

1 Answer

NTL CODES FOR STARVIEW3 in Hampshire


HI FRIENDS TRY THIS ONE ITS WORKED TODAY AT SOUTH WEST /EAST LONDON
5A01 CODE
E7 D3 69 2E 6F 38 EA 78
A1 38 06 29 24 29 8D 2B

Nov 30, 2008 | StarTech.com StarView SV211K 2-port KVM...

1 Answer

Need codes for starview3 ntl plz


0=CD 11 58 05 EE 96 E7 F3
1=EA B7 BF B2 D5 AA 46 AB

Nov 29, 2008 | StarTech.com StarView SV211K 2-port KVM...

1 Answer

Need codes for 29/11/08 teeside starview3


Try the following:

ntl November 26th 2008

00 = D7 0A BC 19 3D 01 97 47
01 = BE 92 99 4D 61 EE FD B2

TELEWEST November 26th 2008 x

00 = 6E 57 02 AC F7 58 C3 52
01 = A5 5F 0A 63 A5 8F 15 8D

Nov 29, 2008 | StarTech.com StarView SV211K 2-port KVM...

Not finding what you are looking for?
StarTech.com StarView SV211K 2-port KVM Switch Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top StarTech.com Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18357 Answers

loftys0504

Level 2 Expert

191 Answers

john1601

Level 1 Expert

27 Answers

Are you a StarTech.com Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...