Question about Bosch Axxis WFL 2060 Front Load Washer

Open Question

Door will not open

My wife has a Iberna Model No ILF 637 washing machine.I cannot open the door .Solution PLEASE

Posted by on

5 Suggested Answers

MsMitch
  • 41 Answers

SOURCE: fitting washing machine boot gasket/door seal

If you don't already have the part go to an appliance store to order it and ask for the instructions.

Posted on May 23, 2008

  • 1 Answer

SOURCE: Washing Machine Door won't open

I had the same problem. I went through all the steps on this thread to no avail. Finaly I just pryed the thing open - with no damage, thank goodness.

Once open I saw that the latch in the door didn't move when I pulled the handle. The problem it seems was in the latch on the door itself. If you end up this problem and want to get wet clothes out, just stick a flat-head screwdriver, behind the door latch into the horseshoe-shaped metal bit and lever it open - no prying necessary.

Not sure how I'm going to fix this permantely but at least I got my wet clothes out and can do laundry as long as I keep the screwdriver near by.

To fix - I'll either need to figure out how to disassemble the door and replace the latch mechanism, or just buy a whole new door.

Posted on Sep 21, 2008

  • 2 Answers

SOURCE: FRONT LOADER DOOR LOCK WONT OPEN OR JAMMED

On a Bosch wfmc3200uc there is a green plastic string, similar to fishing line, located behind the round panel on the front of the machine. It is attached to the top right of the round black piece. Just give a slight tug this will release the lock.

Posted on Oct 21, 2008

gittos73
  • 244 Answers

SOURCE: Broken door handle for a Thor washing machine

there r 2 ways to get the door open 1)use a normal knife and place in front of the door handle push it in and it should open 2)pull the plug out take the lid off now place your hand down to where the catch goes into the washer using your fingers u should be able to pop it open with a bit off fiddling

Posted on Dec 16, 2008

  • 1 Answer

SOURCE: Cant open door of washing machine

I plugged it out. Left it for 15 minutes. When I went back the door could be opened and it also started to wash.

Posted on Jan 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My hotpoint aqualtis model number aq9f 492 u is showing f6 what does this mean


F06 Door lock fault
Issue: Washing machine door cannot be opened or closed / when the door is closed the machine the programme will not start.
Advice: If your washing machine door will not close, please check for any obstructions in the door lock.

Dec 29, 2015 | Hotpoint Washing Machines

1 Answer

Door opens mid cycle??!


This video will show you how to open your Zanussi Progress ZWG3121washing machine door that is stuck shut
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Jul 27, 2013 | Zanussi Washing Machines

1 Answer

I have the indesit moon washer. The red door lock light is flashing when i start the cycle which is stopping the washer from going. The door is locked properly and there is nothing caught in it.


Just sorted this problem out, wife said just b4 leaving for work,oh love the door on the washing machine wont open and theres a red light on,,OMG i thought, as she said she would find the instructions when she gets home, so i got the corless drill out and a big hammer,( not needed,) lol just turned the power off and after 2 mins the door unlocked and was able to get all the clean wifes undearware out, cheers all and hope this helps

Oct 06, 2010 | Indesit Washing Machines

1 Answer

Door will not unlatch after wash


hi..remove the lower front panel use torx 15,reach up to the
lock and pull down on a ring that comes down below the lock
assembly and the door should open.
try this out..
thank u..
kindly rate my response..

May 09, 2009 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

Door lock


Switch off. Try some WD40 on the machine lock (not on door) and open & close door many times, to ease out the lock.

Jan 28, 2009 | Hotpoint WMA54 Front Load Washer

1 Answer

Maytag Neptune Leaking From the Door


possibly door lock not latching could be a bad wax mtr (within door lock asm) or control board

Dec 12, 2008 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

LG Front Loader made a bang noise.


Door Eventually Opened. Checked all components and found that a thyristor on the main PCB had blown up. The main board is all encased in a epoxy resin so I am forced to buy a complete new unit instead of fixing it. The thyristor costs a couple of bucks but the complete board costs heaps. Who ever designed the system like this must have been in cahoots with the parts supply section. They obviuosly made sure of their future trade.

Jan 02, 2008 | Washing Machines

Not finding what you are looking for?
Bosch Axxis WFL 2060 Front Load Washer Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...