Question about Computers & Internet

1 Answer

Posiflex 6000TP Jiva Pos terminal with Win 2000 Pro OS

We are running Volante Restaurant Software on 10 terminals and one terminal went blank. The unit was hard rebooted and also had Volante support person link into the terminal through a utility software, but could not get the unit to load the Volante Software to use in this terminal. We replaced it with a backup 6000 TP. This unit has a Celeron Processor.

Volante said that the unit needs the hardware looked at.

The two fans are moving. I'm doing a dfragment of the harddrive and I'm stuck on 70% full and has been in this state for 4 hours. I have 30,296 MB max showing on the display and 70% and I also have a set of colored lines showing what part of the hard drive is what.

Im ready to do another hard boot to get out of this state.

Do you have any ideas on what may be wrong?
I'm looking for a service depot for strange problems?
I'm looking for aome rebuilt great shape Posiflex 6000 TP units, maybe two since they are not built anymore?

Let me know about yourselves and if you can help?

S & S Cash Reg
Ted Sledge
402 968 5709

Posted by on

  • yanal mousa
    yanal mousa Dec 06, 2008

    please let me know what the solution for this problem ?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Cooled boot the reload OS if not your PT600 over heated I have six for sale If you cant mix your problem!

Posted on Feb 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i try to install win xp does not find the lan port even if allready have the lan driver. What do i do ?


make sure you have the right driver, posiflex uses 2 different nic chip depending on which motherboard your system uses.

Jun 15, 2010 | Posiflex Jiva 5800 POS Workstation - P/N...

2 Answers

I need a owners manual


Click on this link to download documentation for your machine.
http://www.posiflexusa.com/documentscopy.php#
Let me know if this helps.
Please rate this solution.
Lone99star

Jun 30, 2009 | Posiflex JIVA 8000 Touch Terminal Network...

1 Answer

Posiflex Jiva 8000 Machine have lots of problems specially it does not have good ventilation and ofen power adapters and hardisk fails. I strongly recommend not to take this POS system and get into...


The problem with posiflex with fan models are started by the fans going bad which lead to overheating of the cpu and then spread to other components. Most of the time the power adapters and harddisk are actually ok, but the system will need some component level repair.

Mar 24, 2009 | Posiflex JIVA 8000 Touch Terminal Network...

1 Answer

Purchased used Jiva POS system


Jiva is just the manufactures name for the terminal they make. It has a microsoft operating system, usually xpPro. You can use any Restaurant POS software on it as long as it is compatable.

To get help with the software side you need to know what the name of the software is and contact them. Most software is propiertary to the previous customer and you will have to pay for a name change, support, reprogramming etc.

Contact a local POS reseller in your area, they might be able to help or leave some contact info and I will try to help

Olin

Feb 11, 2009 | Posiflex Jiva 5800 POS Workstation - P/N...

1 Answer

DEEM IN THE SCREEN OF A POSIFLEX JIVA 5700


You might need backlight and/or inverter replacement/repair.

Aug 29, 2008 | Posiflex Jiva 5800 All-In-One...

2 Answers

DEEM IN THE SCREEN OF A POSIFLEX JIVA 5700


Your LCD probably has a bad bulb...if it does not get brighter within an hour of being on...I would suggest you buy a refurbished orused terminal..or new one.

May 18, 2007 | Posiflex Jiva 5800 All-In-One...

4 Answers

Posiflex TP5800 - Reinstallation of OS


I'm assuming that you do not have a cd or floppy drive on the terminal. Well i had a similiar terminal with no cd or floppy drive and i managed to re-install the os by removing the hard drive, mounting it on an existing machine with windows 2000 machine then i copied the installation to the hard drive by using the winnt32 command ine utility. So lets say that you remove the hard drive and mount it to another PC(In my case it was a laptop harddrive 2.5" and i needed a converter)and on the pc I formatted it and it was designated as drive G:. My cd rom is drive E: With the windows 2000 cd rom in the drive from the command prompt i typed E:\i386\winnt32 /makelocalsource /syspart:G /tempdrive:G After that completes i put back in the hard drive in the terminal and boot the terminal and i continue with setup. I hope this was helpful!

Apr 24, 2007 | Posiflex Jiva 5800 All-In-One...

1 Answer

Need a driver board for a Posiflex terminal.


go to this link http://www.posiflexusa.com/driver.php

Sep 24, 2006 | Posiflex Jiva 5815 Network Terminal

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

100288 Answers

David Payne
David Payne

Level 3 Expert

14160 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...