You probably need to replace the transfer belt. Go into the diagnostic menu and perform a half-test. Open the printer and see if the document looks right before it goes into the fuser. Be careful, the toner will be loose.
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Download the software associated with the printer from the manufacturer web site to make sure you have the latest version. If this doesn't fix the problem you may have to buy a new print head for the printer. Also try taking the cartridge out and shaking it vigorously.
the PHD transfers the image to the printed page and when it starts to go bad the images can become dull or faded and even blurry or totally missing. Id recommend the PHD be replaced and it should resolve your issues.
I assume you've checked magenta toner cartridge level, and tried cleaning. If so, the next thing to do is try cleaning the scanner mirror. On these models the mirror nearest the magenta toner builds up dust the most quickly, hence why it is the first colour to fade on prints. Only use dry swabs (no solvents) and compressed clean air on the mirrors.
my canon mp250 won't print color photos it does well with BW but not color. I took back the first one I had did the same thing now the second one won't print color photos off the internet. what did I do wrong? Both inks are brand new.
Laser Jet 1018 when print fade color out Hi my name is Robinson from Ethiopia,Addis abeba my printer is laser jet 1018 i need to ask I am buy another cartilage new one and then install in my pc affter install the cartilage toner i see this things 1.when i print fade color out but the cartilage toner is new what is this problem i am guse may be paper quality or weather selection i am ask this one when some other place change the printer print pure with out fade may be guse more u tell me plz if u can now Thank u!
Everyone will tell you that it's the Imaging Unit - happy to say that's not true. If it was the imaging unit the colors would not come out right either. I bet if you print a test page that all the colors come out fine across the page. It's only the black. Also - if you replace the black toner cartridge, or reinstall your printer and drivers like some people will tell you - still no results. The problem is in the black toner cartridge PATH inside the printer. Something has jammed it up a bit. Try taking out the black cartridge and blowing firmly into the small hole at the bottom of the spout that looks to have a sponge inside. Use a straw and make sure your air blown is dry. Then lightly tap the cartridge a few times. Then use the straw and once again blow very firmly inside the receiving path (inside the printer) for the spout on the cartridge. Make sure you are blowing into the spout path at the bottom - not the gear drive path in the middle - as that will not do any good. Replace the cartridge, warm up and print another black and white page. You should see that the faded out section is gone or diminished in size. If it is not gone, simply repeat the above steps until it is gone. You will see that the faded out strip gets smaller and smaller each time until it's gone. I had to repeat five times, but eventually got it corrected. Now prints like brand new so don't get discouraged. Loki
Press Green Tick, Right, -> System Setup -> Right, Right, -> Print Quality, Right -> Replace Supplies.
Change from stop at out, to override at out.
It'll let you print, and you'll get loads more out of your toner before the pages start to fade.
get in touch with your Samsung dealer or Samsung direct it speak to the IT departement if the printer has only printed 5000 or less pages total then you could get it repaired on the warrenty the main problem that is causing this is the optical print unit is damage or faulty- mainly the latter...