Cant find DVN-NFHc.c14

My solution was to change the original power inlet (mains socket) of the keyboard with a Euro IEC C14 power chassis inlet. Now it is ready to run with a standard power cable which you can find on nearly any computer or other electrical component.
What you need to do this, is a kind of file, the Euro IEC C14 power chassis inlet with the proper cable and a soldering iron.
The change of the chassis inlet was very easy: open the keyboard and loosen the two screws which holds the socket (it's more easy for you if you remove the plastic cap from the PWR Supply also). Disconnect and remove the old socket. Then take a file (or what ever you prefer - I used a Proxxon to speed up things a little bit) and widen the original opening very slightly. Solder the connecting cables from the old Yamaha socket to the new Euro socket, an install it. Close the keyboard und have fun :-)
Maybe this sounds very tricky and sophisticated to you, in fact it took not more than 20 minutes for me (if you have anythig you need at hand).
This works not only for PS-6100 but also for Yamaha PSR-6300.

Hi,
it's long time since the last post here, anyway I have a problem with this game's patch,
I want to install latest patch which is 1.4
it's said for installing that, these versions are needed :
1.0.2 , 1.0.3 , 1.1.0 , 1.2.1 , 1.2.2 , 1.3.0
I have downloaded and installed 1.1 and 1.2.1
but couldn't install 1.3
seems 1.2.2 is needed, but couldn't find it anywhere, can anyone

Delete your save file and start over again. Press Up+B+Select on the title screen and press Yes. Or you could use a Walk Through Walls code (with GameShark, if you have one) to get yourself out of there.

open the crack folder and copy the .exe file from that game disk, after that open the game directory where you install the game and paste inside of that, it will ask you to replace click on "yes" button. now you can play without disc.......
thank you

Try deleting the save file and starting over. It's really all you can do if you can't get out. To delete the save file, start the game up and at the title screen, press Up+B+Select, and select Yes. The game will then restart, your save file deleted. Now you just have to begin a new game (hopefully you weren't very far, anyway).

Ok go into the main file it is kept in you can find out by right clicking on the desktop icon and going to properties and looking at the target and this is were the file is located you can start the game from there and try to put a new desktop icon in its place

make sure you put the psp games cso files like Starwars.cso in the iso folder on ur card. other emulaotrs need to be in the psp/game.


So open ur psp find them .cso file[game] and the cut paste it to the ISO folder k

emulators need to be in PSP/GAME and maks sure ther emu isnt in a folder cause in cant read into two folders

o and if it doesnt work make sure ur VSH menu has the iso mount to sony np3076078

dear friend .
you need to insert the cd for cricket 2007.
(it may be two cd pack)
insert the cd1 then autoplay starts .
and starts installing if it does not start automatically.
double-click on your cd/dvd drive.
after it starts it asks for key which u can get from
crack folder and right click on rid07 aand run as .
it generates the key which then can be used for the installation.
after that it asks for cd2 insert it and finish installing .
for playing u need to copy all files form crack folder.and paste them in your EAgames/cricket07 and replace existing file.them u can play the game.
thanks for reading the solution.

when i type that code *#9998*4678255# ...screen show..*#9998*------* and nothing....what is that?...

i cant transfer files from my motorokr E6 cell phone to my PC even after installing the cd. how can i get rid of this problem?