Question about Toshiba 27A41 27" TV

1 Answer

Turning on When you try to turn it on the LED turn on for a second then goes off. But you can here the T.V. try and turn on but does'nt. Before it use to turn of if the screen got to "bright" i.e. alot of white on the screen or brightness setting to high. Any ides on what might cause this. Thanks, Chris

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has answered 200 questions.

  • Expert
  • 236 Answers
Re: turning on

It sounds like you have a problem with the screen control which is usually part of the flyback transformer. If the screen voltage goes too high the picture tube current also goes too high and causes the set to go into shut down.. Now that it won't come on at all, I'd say that the flyback and horizontal output transistor have shorted. You'd probably ahve to take it to the shop and have it checked if you're not a tv repairman. Stargazer

Posted on Feb 17, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Standby timer blinks times

There are particular blinks meaning on sony TV. I can give you the problem from your sony tv if you specify or count how times the LED flashed.

Jul 06, 2014 | Sony KV-27S42 27" TV

1 Answer

Tv will not turn on green light flashes for 10 seconds then goes to red

Tv's are designed to check themselves for problems when 1st turned on. If something is shorted and a voltage goes to high they will not turn on fully. It sounds like your set is trying to turn on yet sees a problem then goes back into standby mode. This can be cause by many different circuit problems. Generally repairs can range from $75 to over $200 depending on problem and brand. I only recommend repairs if half the cost or less to fix. Since your ? only stated it's a CRT. I would recommend your purchase a new LED LCD TV. CRT (cathode ray tube) Tv's are now old technology. You could probally find a new set for the price to fix the old.

Jan 20, 2014 | Standard (CRT) Televisions

1 Answer

Video goes off led blinks 5 times then video returns, audio ok

  1. Five blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly. For more details, check this.

Jan 08, 2013 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Sony trinitron kv-es29m80 tv has no led light

The blinks are fault indication. If the standby light blinks 10 times and the set shuts down after that;
Check Q8014 and Q8013 for shorts, leakage, or bad solder connections on the " D" board. If the transistors are bad, check R8051 and IC8005, also on the "D" board

Apr 12, 2012 | Standard (CRT) Televisions

2 Answers

Need code for Innovage jumbo universal remote for a rca tv

The Innovage Jumbo users manual lists over two dozen RCA TV remote codes. They are:

000, 003, 004, 005, 007, 009, 011, 015, 048, 082, 092, 094, 096, 098, 101, 102, 103, 107, 113, 125, 129, 167, 179, 187, 188, 191, & 194.

To program your remote by entering a code, follow these steps:

  1. Turn on your TV.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
  4. Enter the first set of 3-digit codes from the list. The LED will blink once every keypress. After the 3rd digit, the red LED will turn off indicating that the code was recognized for the device. If the code was not compatible, the LED will flash several times and you need to return to step 2 to try that code again or to try the next code in the list.
  5. After the LED has turned off, aim the remote at the TV and press ON/OFF. If the device turns off, you have used the correct code and the remote was successfully programed. If the device does not power off, return to step 2 and try again with the next code in the list.
If you can't be bothered to enter each of those codes one at a time, you might consider the auto-search function.

To have the remote try each TV code it knows one at a time, follow these steps:
  1. Turn on your TV.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
  4. Press the ON/OFF button slowly and repeatedly until the TV turns off. The LED will blink once each time you press the ON/OFF button.
  5. Once the TV turns off, press the ENTER button to store the code and the LED will turn off.
I hope that helps.

Sep 17, 2009 | RCA TruFlat 27F520T 27" TV

1 Answer

Sony kv 27V15: No picture but sound

Hi! the trouble indicates that your television's picture is the culprit, have your unit check by a qualified technician for verification.

Sep 12, 2009 | Sony KV-27V15 27" TV

1 Answer



Aug 28, 2009 | RCA HD52W58 52" TV

1 Answer

My THOMPSON TV won't turn on!!

Circuit board inside the TV was loose!!

Feb 16, 2009 | Thomson 24WK25U 24" TV

1 Answer

Sony Trinitron KV-28WS3U Dies

B+ over current protection (OCP), unit goes to the standby mode. Could be a short in the power supply of any of the circuits.

Nov 05, 2006 | Sony FD Trinitron WEGA KV-32FS100 32" TV

Not finding what you are looking for?
Toshiba 27A41 27" TV Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Standard (CRT) Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers


Level 2 Expert

49 Answers

Cindy Wells

Level 3 Expert

4721 Answers

Are you a Toshiba Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides