Question about Panasonic PT-50LC13 50" Rear Projection HDTV

1 Answer

Have Panasonic TV/VCR model PV-C1322

I assume I'm not able to connect a DVD player to this model. I'm unable to see a way to do this. Correct?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Contributor
  • 1,199 Answers

Just buy an RF modulator at wall mart or radio shack and follow the directions (cost about $20.00 and takes two min to do
I hope this info helped you!

Posted on Dec 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Free tv repair advice


Assuming TV reception is no problem. If your video/dvd is connected to TV with Euro plug it may be Euro partly slicked out from socket. If it's with separate audio l/r chinch check chinches. If ok then check solderings of sockets to board - sometime cracking. Try also replace connecting cables . Other reasons are more complicated and less probably.

Mar 01, 2014 | Projection Televisions

2 Answers

I HAVE A MAGNAVOX TV MODEL 255102-OODD, A MOTOROLLA (VERIZON) SET TOP BOX MODEL QIP2400/1006 AND A JVC DVD MODEL DR-MV150BJ. I HAVE TRIED ALL THE HOOK-UPS SUGGESTED BY JVC AND STILL CONNOT GET A PICTURE. ...


ok, The issue will be in the sequence you have things connected. The connections sequence is going to be controlled by what connections are available. I assume the Set Top controller is connection to your Antennea connection on the TV. Your TV should be on channel 3 or 4. The next step depends on what type of connectors you are using for the JVC DVD. I have an Antennea output on mine so I connected them in series. If you don't have an Antennea output from teh DVD player you will need to connect the DVD using Audio/Video cables which means you will need to connect to the TV alternate Source connector and to watch DVD's you will need to change to that source. Much like you would switch between regular TV and VCR tape on a VCR player connected to the Antennea connector.

Sep 23, 2009 | Projection Televisions

2 Answers

Bought a proscanlcd hdtv 32lb30Q unable to get cable signal


Hi and welcome to FixYa,

Initially, pls confirm if below is how it is wired using a coaxial cable and not 3cable RCA to RCA:
  • Charter Digital Cable > DVD/VCR > TV
If yes and your concern is snowy or no signal on the TV screen, might it be that you have to power OFF the DVD/VCR when selecting channels on the TV itself (including when channel setup is being done).

Alternately, you can tune the TV to channel 3 and let the DVD/VCR do the channel selections.

Pls post back results. Good luck and thank you for using FixYa.

Jan 26, 2009 | Projection Televisions

1 Answer

I want to hook a system


you will only be able to get digital surround( dolby digital ) from your dvd player( by the coax or optical digital connections ) , the rest will only be in virtual surround

from the dtv box plug the yellow video jack(RCA) into the vcr video input , then plug the audio jack or jacks into the audio input on the vcr. from the vcr hook the audio out to the audio in on the reciever( tv/vcr/sat... input ) , then also connect RF out from the VCR to RF in on the TV .
for the dvd player hook the "s-video out" to the "s-video in" on the tv , then the audio L and R on same s-video input , then send the audio out connection on tv to L and R input on reciever dvd L and R input , then you will need to connect the optical from the dvd player to the reciever or coax connections for the dolby digital on the reciever to work

Jan 17, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Can't get toshiba vcr to work with toshiba TTP-61H95 and dvd


please make sure the cable from ur vcr is attach at V-OUT...and cable from vcr that attach to dvd is V-IN...to make sure vcr is displayed at your tv, unplugged cable from vcr-to-dvd to from vcr(V-OUT)-to-tv(V-IN)...

Jan 10, 2009 | Toshiba TP61H95 61" Rear Projection...

1 Answer

PANASONIC COMBO TV DVD VCR,REMOTE CONTROL NOT WORKING,NEW REMOTE CONTROL STILL INOPERATIVE,SUSPECT INFRARED RECEIVER IN TV,NEED SCHEMATIC OF A PV-DM2792 TKS


You can try replacing the remote receiver inside the set. This should be a small silver box located in the front of hte set. It should have 3 leads soldered to the board. The part number is:
LSSZ0004 and costs about $5.

Dan

Jul 03, 2008 | Projection Televisions

1 Answer

Panasonic Viera 37 inch Plasma won't read DVD player


does the cd/dvd player have component hookups or are you just using HDMI cable, lots of tv's are having trouble with the HDMI protocol, I only use component cabling, it has HD capability up to 1080i resolution

Mar 16, 2008 | Projection Televisions

1 Answer

Akai TV hookup to Panasonic DVD/CD Player


I'm going to assume that you can watch TV. on this set. In order for you to be able to watch another input, you'll have to select the proper feed on the TV...accordianman

Jan 16, 2008 | Panasonic PT-47WX49 47" Rear Projection...

Not finding what you are looking for?
Panasonic PT-50LC13 50" Rear Projection HDTV Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

The Knight
The Knight

Level 3 Expert

68368 Answers

Are you a Panasonic Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...