I've done it myself, thanx. i got up menu, went onto Factory Settings & pressed delete. English language came up & pressed OK,it went back onto menu. then i went onto Installation & made sure it was on NTHELL !!. i then AUTO scanned & saved programmes. i then went back onto menu & pressed 1570 & went onto Nagravision. then making sure it was still on NTHELL, ipressed OK & switched the EMU part, from OFF, back onto ON, i then pressed EXIT 3 times & lo & behold, not only did i have sound, but i could also list the programmes alphabetically !! & i also have SETANTA'S 1,2 & SETANTA SPORTS NEWS !! i really hope all this is helpful & don't forget everyone, MAY THE FORCE BE WITH YOU !! ps. YOU ALSO THEN GET ---- Liverpool tv, Arsenal tv, Celtic tv & Rangers tv. GOOD LUCK EVERYONE & DON'T LET THE BXXXXXDS GRIND YOU DOWN, THERE IS ALWAYS A WAY !!!!! MERRY XMAS 2 U ALL
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
eto where are u most people have just a the freeview channels but no sound on the other ones, the box usb has been comprimised and it is lookin doubtful that they will come back on as the people who make the software to flash the boxes dont want to make new software for this problem, the box 1, 2, and 3 should work ok just not the box 4 usb :(
Try and determine the lowest transponder frequency that you can get a signal on. Look at the frequencies you already have on the channels saved so far and choose the lowest. Then in the installation menu select MANUAL SCAN and set that as the frequency. Make sure you can see a signal and scroll down to Network scan and change to ENABLE with the Right arrow. While still highlighted, click OK. Scanning should then begin. It will say 1/1 to start with but should then jump up to 1/?? (the ?? being 2 digits).