- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When you find a frequency that you want to store in memory, press one of pre- set tuning buttons 1through 6 and hold until the preset number stops flashing. The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory. The next time you press the same preset tun- ing button the radio station frequency is re- called from memory.
your deck has two power sources a main for when your car is turned on so the radio kicks on and a remote which is always on keeping stations and clock powered passively so whoever installed it did it improperly or do to road wear and tear it was jossled lose and can simply tightened after pulling the deck out
wellto set the clock you need to first hold the source button to turn it off to where the clock is just on. then press and hold the clock button until it beeps then use the arrows to set the clock..........
and to set the stations you need to tune in your fav station and then press and hold the number you want to place that station. you can also do best station memory if you are in an unfamiliar area or if you just want to fast tune all the local stations that come in the best it will randomly preset the stations by pressing and holding till it beeps on the program bottom. then the screen will run BSMuntil it finds and places the stations. hope this helps!
HAS TO BE A CONSTANT POWER WIRE THAT CONTROLS CLOCK AND SETTINGS SHOULD BE A 16-14 GUAGE WIRE THE SAY 12+ AND HAS TO BE HOOKED INTO A CURCUIT HAS IS POWERED ALL THE TIME (NOT ONLY WHEN IGNITION IS TURNED ON)