Question about Televison & Video

Open Question

I have a SANSUI FURATTO - 21 - WT television. The remote control for the television is not working. I need to have a new remote from the company's service center. Can you help me with this ?

Posted by on

5 Suggested Answers

BMW Rider
  • 232 Answers

SOURCE: remote control CT 9954

Hi, here ya go, order part number 23306269 here, www.wehaveparts.com they show several in stock, cost is $34.34 + s&h, good luck, BMW Rider

Posted on Jan 04, 2008

  • 1 Answer

SOURCE: Desperatly needing code for Centrex television A.S.A.P

finally i got a remote with the centrex code,.. Its 0056 bye

Posted on Apr 12, 2008

  • 133 Answers

SOURCE: i need the code to

I own a One-for-All universal remote, and my booklet says the setup code for a Sansui TV ( without a built-in DVD or VCR) is 0463. I can not guarantee that this number will work with your remote, but it is worth a try.

Posted on Jul 06, 2008

  • 133 Answers

SOURCE: My remote control for

The simplest solution would be to buy a new remote for testing purposes. I own a One-for-All universal remote (model URC-4220), which I bought at Walmart, for less than 10 dollars. It is compatible with Zenith TVs. (You can return it later, if necessary).
If the channel-changing problem is not resolved with your new remote, then you will know for sure there is a defect in your TV, which requires the expertise of a repairman.

Posted on Jul 09, 2008

AvioriX
  • 689 Answers

SOURCE: I have a Sansui Television,

After Reset Use following codes
173, 095, 171, 004, 006
012, 029, 111, 112, 113, 122

Posted on Aug 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic TV remote unable to get 21-2, 21-3. 21-1 no problem


Hi Robert, not clear as to your problem! Are you trying to enter 3 digit numbers on your remote?

Nov 12, 2014 | Panasonic Plasma Lcd Tv Remote Control...

1 Answer

Mitusbishi WT 42385 HDTV. Having a problem getting the HDTV to work. I do not have the remote, but when you set it to HDTV channels it only shows snow in the picture. The sound works fine. Can I do...


After the work we did with your rep to resolve the issue we determined that we did not have a means to fix the problem. Your rep suggested to call the cable provider and have them run a test signal. They said that would probably fix the problem, but if it didn't they may need to change the cable box. I contacted the cable company and they ran the test signal which did not work so yesterday the cable company sent a technician out and they changed the box. This corrected the problem and the HDTV is working great. Thanks for the help even though it did not work by your solution directly, you did lead me to resolve the problem.
thanks
Jeff Knight

Jan 03, 2009 | Televison & Video

1 Answer

I need the code to set for sansui tv using ge universal remote control. pls help me! thanks


I own a One-for-All universal remote, and my booklet says the setup code for a Sansui TV ( without a built-in DVD or VCR) is 0463. I can not guarantee that this number will work with your remote, but it is worth a try.

Jul 05, 2008 | Televison & Video

2 Answers

Remote control


Try codes for Durabrand, Orion, and Sansui.

May 23, 2008 | Televison & Video

2 Answers

Mitsubishi wt-42413 Power problem


Okay try to distinguish if the three blinks is 1 pause then 2 blinks or 2blinks pause 1 blink. As the set will only blink a two digit code 12 meaning no error detected and 21 meaning the set is hutdown due to xray protection.

May 13, 2008 | Mitsubishi WT-42413 42" Rear Projection...

1 Answer

I have a sansui tv set and I need thhe tv code to program my remote control


Hi there shelly

I will need to know the make and model of your remote control to get you the code. Can you post that here for me please.. :)

robotek

May 06, 2008 | Televison & Video

1 Answer

Screen cut off on the bottom - WT-42313 Mits 42"


Make sure your remote is the official Mit remote, and that it is set for TV, usually the far left setting at the top of the remote.

These remotes control many different devices. Some will allow video to work without allowing audio to work.

TV will allow all to work.


Mr Bob

Jan 23, 2008 | Mitsubishi WT-42313 42" Rear Projection...

1 Answer

Burnout ? wt-46807


There could be a Pip problem or the vertical sweep could have went out also so then the set shuts down the video so it does not burn a line across the tubes. Theres really no way to tell what is wrong or it would just be a guess, a shot in the dark. Call out an authorized repair depot and get an estimate. Good Luck

Oct 29, 2006 | Mitsubishi WT-46807 46" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69804 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6384 Answers

yadayada
yadayada

Level 3 Expert

63990 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...