Question about Televison & Video

1 Answer

Digi box Dear TP Edwards, Thank you for your reply. Much appreciated. No I haven't tried the box with another TV. I only have one TV so not sure where to go from here. Do you have any suggestions? What is the forum you are referring to...? Thanks again, Frank

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Try going through the reset steps, even though you can't see the screen.
Turn on the box - Press back a couple of times to make sure you're on the right screen.
These are the steps:
Press Menu > press the down key 3 times to Setup >
press the down key 5 times to Help
Then press the Green Button (Even though it doesn't show as an option) Then press the Red button for a full reset
Warning: You will lose all data on the Hard Disk!
I don't recall the forum I found this on as I found it on a google search.
Trev

Posted on Dec 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Connect to TV


Sometimes the DVD players do not connect the scart like the VCR did. It has to do with the protection of the digital rights.
If you only have one scart entry on your TV, try connecting the DVD on the VCR and the VCR on the TV. (if possible)

Dec 27, 2014 | Televison & Video

1 Answer

How can I set up a Bush Digi Box with 2 scart sockets to a Sony combined DVD & Videao Recorder with 2 scarts to a Sony TV with 3 scarts


Bush Digi box - 'TV' SCART to TV

Bush Digi box - 'VCR' SCART to DVD/Video recorder 'TV' SCART

The digibox will pass through when the DVD/VCR is playing.

Aug 30, 2014 | Televison & Video

1 Answer

Westinghouse 32' flat screen tv wont work with cox cable receiver


Hello
You haven't stated the type of signals that comes with your co-axial cable; analogue or digital. Anyway, you have to retune the TV after connecting it properly with Cox-Cable receiver with TV.

Feb 23, 2012 | Westinghouse LTV-32w1 32 in. HD-Ready LCD...

1 Answer

We have bought a digi box for this tv but can not tune the tv


hello make sure the aerial is connected to the digi box then a lead from the digi box the the tv also connected a scart lead from the digi to the tv the go into the menu choose first time installion click ok the it should search

regards
shaun

Mar 27, 2010 | Televison & Video

1 Answer

How do you connect the digi box to tv and vcr


Put the main aerial into the digi box,connect a fly lead from the other connection on the digi box and plug it into the vcr,then take another fly lead from the vcr and plug into the tv,connect the digi box to the tv with a scart lead.

Dec 12, 2009 | Televison & Video

2 Answers

How do i set up atv without inbuilt digital a seperate digital box and a video recorder?the tv digital tuner and video all have scart leads.Should the aerial cable go to the video or digital box?


Aerial to digi box first then video then tv (not strictly necessary)
Depending on what you want to do with the vcr and the digi minimum scart connection is
digi to video - video to tv

Nov 08, 2009 | Computers & Internet

1 Answer

How do you set up digi box with VHS recorderand Tv. Digi box has two scart leads


Take one scart from the digi-box & connect the other end to the TV, & the second scart on the digi-box can connect to the VCR. To record from the digi-box, the VCR must be set to the AUX input (or AV ). The TV will also be set to the AV input, this set up will let you watch digital channels & to record a digital source. Be aware depending on your type of digi-box, you may not be able to record & watch two different digital channels at the same time.

Oct 14, 2009 | Electronics - Others

1 Answer

Cox Cable Remote wont program to my Sylvania LC320ss8 tv.


there are different codes for the devices that you are using. When you want to insert the code for the tv. > Switch tv on and then switch all the other devices off. Insert code. For digi box > switch on and all other devices off. Insert code for digibox. You must then switch between tv and digi box using the buttons on the top of the remote. Toggle between tv/ digi box.

Have a go with the codes below with the tv and the digibox both on, you never know you might get lucky as these are new codes, if not revert back to 1st solution.

Universal Codes (both should work using these, i think!!!!! try 'em)

002,
008,
155,
198,
227,
231

Here are the codes for the 1st solution.


Good Luck,

Hughie.
Tv

0062
0004
0009
0135
0189
0183
1141
0227
0456
0008
0068
0075
0141
0161

Digi Box.

0899
0227
0287
0290
0225
0456
0251
0292
0236
0458
1106

Jun 18, 2009 | Sylvania LC320SS8 32 in. LCD Television

3 Answers

DVD recording.


Sounds like the DVDR is recording from the digi-box through the TV, so when the TV is switched of or into standby the signal is lost, causing the recorder to pause.

Assuming the digi-box has two scart sockets, connect as follows:

  • Scart 1 or TV scart of the digi-box to the TV.
  • Scart 2 or VCR/DVD scart of the digi-box to scart 1 of the DVDR3380.
The TV aerial should already be connected through the digi-box and DVDR3380 to the TV

To record from the digi-box, select AV1 / E1 / EXT1 on the DVDR3380

Feb 05, 2008 | Philips DVDR3380/05 DVD Recorder

1 Answer

Can't tune stations from freeview box to DVDR3380/5


You can only record freeview channels through your box.


Assuming the digi-box has two scart sockets, connect as follows:

  • Scart 1 or TV scart of the digi-box to the TV.
  • Scart 2 or VCR/DVD scart of the digi-box to scart 1 of the DVDR3380.
The TV aerial should already be connected through the digi-box and DVDR3380 to the TV

To record from the digi-box, select AV1 / E1 / EXT1 on the DVDR3380
If you are doing timer recordings, you will also need to leave the freeview box on the channel you wish to record, or set the freeview box timer.

Dec 15, 2007 | Philips DVDR3380/05 DVD Recorder

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...