Question about Insignia I-LC23Q1 23 in. HD-Ready LCD Television

1 Answer

Permanent mute on tv screen

When I turn the tv on it shows mute, i press the mute button on the remote and it now shows mute twice. so i unmute with the remote but no sound and the screen still says mute. i used the side panel of tv or the volume but no luck. can anybody help. I cant even get the closed captions to work. I have no tv to watch, i feel deaf

Posted by on

  • aemclm07 Oct 20, 2008

    same problem only i got the tv for my kids from my friend and i have no remote. the model is a Zenith SF5227W. ive tried every option i can find under the menu key on the tv itself but to no avail...

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 48 Answers

Unplug the TV for 30 seconds or more. plug it back in and find the help menu and see how to do a system reset.

Posted on Nov 17, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Controls Don't Work

I have this EXACT SAME problem with my Insignia 26" LCD TV. I was three weeks out of warranty when it happened and Insignia wouldn't do anything to help me. I brought it to three repair shops and each repairman said that they couldn't guarantee they could fix it even IF they got the right parts. Anyhow, the TV repairman had it for three months (getting parts shipped from Asia, repair time, etc.) and he couldn't fix it. He also told me that tons of other people have the issue and that Insignia is replacing their TVs under warranty. So, if your TV is still under warranty, call Insignia. You just have to pay for shipping and shipping insurance. Hope this helps!

Posted on May 18, 2007

  • 9 Answers

SOURCE: closed caption

It's all in your menue set up and you need to call or go online to the company for the solution, using your remote to reprogram it correctly. You need to set it differently than cable...I "think" you have it set twice and it basicly doesn't know what to do. It may be seeing it as directly to TV and so the Cable setting would be the wrong setting.

Posted on May 06, 2008

SOURCE: Closed captioning stuck on!!!

yeah i tried that there is a CCD button which controls the CC but it is turned off...also in the menu/setup it is turned off...

Posted on Oct 07, 2008

RFICKES
  • 51 Answers

SOURCE: CLOSED CAPTION

Unplug the TV, let it sit for a few minutes, then plug t i again. That should reset it. If not, you'll probably have to order the remote from the company to turn it iff.

Posted on Jan 03, 2009

  • 27 Answers

SOURCE: Insignia TV is acting wierd

the problem lies in themain board in the tv. you can buy one from ebay for around $80 used. its not to bad to replace either. just remove the back panel the main board it the tin/ metal wit hthe ciruit board in it on the left side same side as the power botton just unplug the 5-7 wires and unscrew the 2-3 screws and carfully side that board out and replace with a new workign one and put back together and you should be good to go.
please rate my answer it is much apreceated

Posted on Feb 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Program code for Directtv Universal remote.


You can see an easy step-by-step guide to programming your remote right on your TV screen:
sm_cl_blu__number1_icon.pngPress MENU on your remote control sm_cl_blu__number2_icon.pngSelect Settings & Help sm_cl_blu__number3_icon.pngSelect Settings sm_cl_blu__number4_icon.pngSelect Remote Control sm_cl_blu__number5_icon.pngSelect Program Remote and follow the on-screen prompts img_remote_control_tv_sol1.jpg You can also use the manual method below: sm_cl_blu__number1_icon.pngMake sure your TV and your receiver are both on. sm_cl_blu__number2_icon.pngUse this tool to look up the 5-digit code for your TV. There could be more than one code for your brand of TV. sm_cl_blu__number3_icon.pngSlide the MODE switch on your remote control to the TV position. sm_cl_blu__number4_icon.pngPress and hold the MUTE and SELECT buttons at the same time until the green light at the top of your remote flashes twice, then release both buttons. sm_cl_blu__number5_icon.pngUsing the number buttons, enter the 5 digit code for your brand of TV. The green light under the TV should flash twice. sm_cl_blu__number6_icon.pngAim the remote at your TV and press the VOLUME UP button. If the volume doesn't increase, repeat Steps 3-5, trying a different 5-digit code for your TV. If your remote control fails to program using all available codes, try scanning for additional codes. If one of the codes worked, proceed to the next step. sm_cl_blu__number7_icon.pngPress and hold MUTE and SELECT buttons until the green light at the top of your remote control flashes twice. sm_cl_blu__number8_icon.pngEnter 9-6-0 using the keypad on the remote control. The green light should flash twice again. sm_cl_blu__number9_icon.pngSlide the MODE switch on your remote control to the DIRECTV position. img_remote_control_tv_sol2.jpg Follow these steps to scan for additional TV codes using your DIRECTV remote: sm_cl_blu__number1_icon.pngSlide the MODE switch on your remote control all the way to the right to the TV position. sm_cl_blu__number2_icon.pngPress and hold the MUTE and SELECT buttons at the same time until the green light at the top of your remote flashes twice, then release both buttons. sm_cl_blu__number3_icon.pngUsing the number buttons, enter 9-9-1. The green light on your remote should flash twice. sm_cl_blu__number4_icon.pngAim the remote at your TV and press CHAN/PAGE UP button. Tap the CHAN/PAGE UP button repeatedly until the TV powers off. sm_cl_blu__number5_icon.pngWhen the TV powers off, press and release the SELECT button. Note: If the green light flashes three times before your TV responds, then all codes have been cycled through. Our remote controls are guaranteed to program to your DIRECTV receiver, but your TV may not be compatible with our remote control.

Jul 08, 2014 | GE JASRM24912 Remote Control

1 Answer

How can i set up my direct tv remote to my Haier tv


How to scan for TV codes on your DIRECTV remote
  • Make sure your TV is turned on.
  • Slide the mode switch at top of remote to "TV".
  • Press and hold the MUTE button. This is located above the number 1 button.
  • While still holding down MUTE, press and hold the SELECT button until green light at the top of the remote flashes twice.
  • Then enter 9-9-1, the green light on remote should flash twice.
  • Point remote at TV and press CHANNEL UP button. Tap the CHANNEL UP button repeatedly until the TV powers off.
  • When the TV powers off, press and release the SELECT button.

Feb 13, 2013 | Haier HL22XLE2 - HL22XLE2 22 LED-LCD TV -...

1 Answer

How do you unmute a toshiba tv


Check your remote control for its infrared emission. If the remote does work for half mute, an other press must make the TV to full mute, and an other press the TV should be unmuted. Check the remote with new batteries.

Jun 18, 2012 | Toshiba REGZA 47HL167 TV

1 Answer

How to program Direct TV remote


How to program your DIRECTV remote control:

Press MENU on remote.
Select "Parental, Favs and Setup".
Select "System Setup".
Select "Remote".
Select "Program Remote".

While aiming remote at device, follow onscreen instructions to program remote to TV, DVD, or other device.

How to program the white DIRECTV remote to your TV

Look up the control codes for your DIRECTV remote control.
Make sure your TV is turned on.
Slide the mode switch at top of remote to "TV".
Press and hold the MUTE button. This is located above the number 1 button.
While still holding down MUTE, press and hold the SELECT button until the green light at the top of the remote flashes twice.
Enter the first TV code you have. The green light on remote should flash twice.
Aim remote at TV and press PWR button once. The TV should power off.
Once the TV is able to power off/on and control the volume, slide the mode switch at the top of the remote back to the left (DIRECTV). Your remote is now programmed.

If the TV does not power off, repeat steps 4, 5, 6, and 7, using the next code for your TV brand.

If remote control fails to program using all available codes, try scanning for the code.

How to scan for TV codes on your DIRECTV remote

Make sure your TV is turned on.
Slide the mode switch at top of remote to "TV".
Press and hold the MUTE button. This is located above the number 1 button.
While still holding down MUTE, press and hold the SELECT button until green light at the top of the remote flashes twice.
Then enter 9911, the green light on remote should flash twice.
Point remote at TV and press CHANNEL UP button. Tap the CHANNEL UP button repeatedly until the TV powers off.
When the TV powers off, press and release the SELECT button.

Note: If the green light flashes three times before TV responds, then all codes have been cycled through. Our remote controls are guaranteed to program to your DIRECTV receiver, however your TV may not be compatible with our remote control.

You can find more help in the Remote Controls section of our Technical Forums at forums.directv.com. You can also use our Interactive User Guide to learn the ins and outs of your remote control.

Apr 11, 2012 | Audio Players & Recorders

1 Answer

I am trying to program my "Direct TV" remote to my Samsung LCD TV Series 5 and can not find the 5 digit code needed to do so.


If you have a DIRECTV white remote, press "menu" then "settings," "setup," "remote", and follow the on-screen instructions.
If using a gray or black remote,
  • Make sure your TV is turned on.
  • Slide the mode switch at top of remote to "TV".
  • Press and hold the MUTE button. This is located above the number 1 button.
  • While still holding down MUTE, press and hold the SELECT button until green light at the top of the remote flashes twice.
  • Then enter 9911, the green light on remote should flash twice.
  • Point remote at TV and press CHANNEL UP button. Tap the CHANNEL UP button repeatedly until the TV powers off.
  • When the TV powers off, press and release the SELECT button.
  • Sep 07, 2011 | Televison & Video

    1 Answer

    29 inch RCA Entertainment Series TV I was watching it when picked up remote and it muted the sound and I can't get it to unlock the mute in the menu can anyone help me figure this one out???


    Hi try pressing either the mute button again or simply increase the volume to unmute the TV. most TVs respond to this procedure. Pressing the volume buttons on the tv will have the same effect if the remote has failed

    Aug 13, 2010 | Televison & Video

    1 Answer

    Need rca crk17sa users guide for codes for Magnavox TV


    Ok it took me a while. Go to this link to find the codes for you remote: 10054 is the most used code for Magnavox. I hope this helps you out. Good Luck!!!!!!!
    http://www.directv.com/DTVAPP/content/remote_codes

    Here's how to program your DIRECTV remote control:
    1. Press MENU on remote.
    2. Select "Parental, Favs and Setup"
    3. Select "System Setup"
    4. Select "Remote"
    5. Select "Program Remote"
    While aiming remote at device, follow onscreen instructions to program remote to TV, DVD, or other device.


    How to program the white DIRECTV remote to your TV
    1. Look up the control codes for your DIRECTV remote control.
    2. Make sure your TV is turned on.
    3. Slide the mode switch at top of remote to "TV".
    4. Press and hold the MUTE button. This is located above the number 1 button.
    5. While still holding down MUTE, press and hold the SELECT button until the green light at the top of the remote flashes twice.
    6. Enter the first TV code you have. The green light on remote should flash twice.
    7. Aim remote at TV and press PWR button once. The TV should power off.
    8. Once the TV is able to power off/on and control the volume, slide the mode switch at the top of the remote back to the left (DIRECTV). Your remote is now programmed.
    If the TV does not power off, repeat steps 4, 5, 6 and 7, using the next code for your TV brand.
    If remote control fails to program using all available codes, try scanning for the code.


    How to scan for TV codes on your DIRECTV remote
    1. Make sure your TV is turned on.
    2. Slide the mode switch at top of remote to "TV".
    3. Press and hold the MUTE button. This is located above the number 1 button.
    4. While still holding down MUTE, press and hold the SELECT button until green light at the top of the remote flashes twice.
    5. Then enter 991, the green light on remote should flash twice.
    6. Point remote at TV and press CHANNEL UP button. Tap the CHANNEL UP button repeatedly until the TV powers off.
    7. When the TV powers off, press and release the SELECT button.
    Note: If the green light flashes three times before TV responds, then all codes have been cycled through. Our remote controls are guaranteed to program to your DIRECTV receiver, however your TV may not be compatible with our remote control.

    Mar 08, 2010 | Televison & Video

    1 Answer

    Same problem as don5625.my moxi box will not control volume mute or power on my olevia lcd hdtv


    moz-screenshot.pngmoz-screenshot-1.pngf3b19af.jpg

    Is this the style of Moxi remote that you have?
    If so try these steps to find your TV
    1. Turn on the power to your TV.
    2. Press and hold down the MOXI and OK buttons.at the same time until the LED at the top blinks twice.
    3. Press the numbers 9910 on the remote and the led should blink twice again.
    4. Press the mute button. If the TV mutes then press OK to lock in the code. If the TV does not mute press the up arrow once then press mute and continue to press the up arrow once then press mute until the TV mutes once the TV mutes press the OK button to lock in the code.
    *** Note this may take a couple minutes of trying to cycle through the code list to find which one will work with your TV *****

    Good Luck...

    Jan 05, 2010 | Olevia LT37HVS 37 in. LCD HDTV

    1 Answer

    I to just purchased a sylvaniia LC370SS9 and cannot get the right code for a charter moxi DVR remote no help from charter and tried all the codes from sylvania and all there other brands


    f3b19af.jpg

    Is this the style of Moxi remote that you have?
    If so try these steps to find your TV
    1. Turn on the power to your TV.
    2. Press and hold down the MOXI and OK buttons.at the same time until the LED at the top blinks twice.
    3. Press the numbers 9910 on the remote and the led should blink twice again.
    4. Press the mute button. If the TV mutes then press OK to lock in the code. If the TV does not mute press the up arrow once then press mute and continue to press the up arrow once then press mute until the TV mutes once the TV mutes press the OK button to lock in the code.
    *** Note this may take a couple minutes of trying to cycle through the code list to find which one will work with your TV *****

    Good Luck...

    Nov 06, 2009 | Sylvania LC320SS8 32 in. LCD Television

    2 Answers

    Moxi remote control


    The "universal code" 9910 is just the first step in doing a program search. Hold down the MOXI and OK buttons simultaneously until you get the double blink. Then enter 9910 and it will blink twice again. Then begin alternately pushing MUTE and the up arrow (above the OK button). Pushing the up button effectively cycles through the codes and pushing MUTE tests the current code that it is on. Do not go too fast because when you finally push MUTE and it actually mutes (or unmutes) your TV, you must push the OK button to store that code. I just performed this procedure and my first positive code that I stored only affected the mute and volume settings on my TV and would not turn the power on or off. If this happens to you as well, repeat the above process and just skip over the first positive you get until it mutes (or unmutes) your TV again.

    Oct 18, 2008 | Televison & Video

    Not finding what you are looking for?
    Insignia I-LC23Q1 23 in. HD-Ready LCD Television Logo

    Related Topics:

    470 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Insignia Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    75963 Answers

    Jaime Hernandez

    Level 3 Expert

    2337 Answers

    Cindy Wells

    Level 3 Expert

    5648 Answers

    Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...