Question about Canon CLC 1120 Color Copier

2 Answers

My canon read error e000 105

It will come on an then it read error massage eooo 105 an then it turn off in a few seconds

Posted by on

  • designs504 Dec 06, 2008

    i want into the function setting an that didn't work for me. it will not clear these following items # (2000 fixweb)( pri-cle 2000) (p-roller 1000) not sure what that's is do i need to get a service tech are can i fix this

  • creatonine Apr 09, 2009

    my canon read error e000 105 and turn off after few seconds
    It ocured after paper problem into last part of copier (near oil)
    I needed to take off a few part. Maybe i touched something i shouldn't?


×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 67 Answers

Go into service mode -function-clear-error- take machine off -un plug from wall -reconnect- turn machine

Posted on Dec 06, 2008

  • lgroff879 May 05, 2011

    how do you get into service mode?

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I face this prob....this prob bec of thermister(H1) for fixing roller 1st the both pressur & fixing roller thermiser then clear error from service mode then switch off the machine...

Posted on Apr 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

CANNON IR 1600 ERROR EOOO


Check if there is any voltage fluctuations on the line. For clearing the error go to service mode and reset the machine. press additional function button followed by ID button ##sssw will appear on screen press < or > to scroll and select CLEAR & press OK button. press < or > to scroll and select ALL & press OK. PLEASE WAIT ALL will be displayed. Now turn off the machine wait for 3 seconds & turn on the machine. If still there is fluctuation the same 000 error will be displayed.
then you will have to correct your line and do the reset procedure again

Apr 11, 2011 | Canon imageRUNNER 400S Copier

1 Answer

Fax -L380 canon error cod Eooo


Fixing assy failure. Replace fixing assy.

May 18, 2010 | Canon FAX-L380 Plain Paper Laser

1 Answer

Error EOOO ir 2000


Hello ...

E000 The main thermistor reading does not reach 40oC 14 sec after the fixing heater goes ON (fixing low temperature error)

Jan 08, 2009 | Canon imageRUNNER 2000 Copier

1 Answer

I cant send fax


Its laser related error, probably laser controller pcb faulty, most best solution is to buy new fax, eg Canon L140/160. Its by my opinion OK and durable fax

Dec 18, 2008 | Canon FAX-L380 Plain Paper Laser

2 Answers

Getting a eooo mesage


E000 error is due power surge or electrical fault within the copier. you can clear the error in service mode.

Sep 30, 2008 | Canon imageRUNNER 1630 Copier

1 Answer

Eooo


have error message eooo on Canon D860. How do I fix?

Apr 15, 2008 | Canon imageCLASS D860 All-In-One Laser...

1 Answer

Canon imagerunner 210s


EOOO is a thermistor-fuser error. Your machine will need a fuser, but on occasion a power surge can trip the error, E000 needs a code to reset it, I dont know if same but this is the code on a IR 330s
Press the userbutton then press "2" & "8" at the same time and then press userbutton again.
You will now enter servicemode

press " Copier "
press "function"
press "Clear"
press "Error"

leave servicemode by pressing resetbutton twice.

restart machine.

Mind you it is only a reset, if fault still exist it will go eooo again confirming that it needs a new fuser unit.

Dec 30, 2007 | Canon imageRUNNER 210S Copier

23 Answers

System error E000


That's was a miraculous!!!!! My canon Image Class D860 is brand new now after following the steps.

1. Hit Additional Functions Key
2. Hit # key
3. Arrow to number 7, Printer and hit Set
4. Arrow to number 4, Printer Re-Set and hit Set.
5. Yes, re-set printer (hit minus key - back arrow).
6. Unplug the machine and plug it back in.

This just worked for me on a D860

Thanks
Evenel

May 07, 2007 | Canon imageCLASS D860 All-In-One Laser...

Not finding what you are looking for?
Canon CLC 1120 Color Copier Logo

Related Topics:

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1842 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...