Cant get message alert to shut off when volume is loudest
I would like to be able to have my ringer on so that i can hear a phone call but everytime i do that i also get this stupid alert that says "message recieved" everytime i get a text. how can i shut that off so i can still have my ringer volume on level 5.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Message tone and volume works together,so if you have your ring tone volume at the loudest level, the alert tone for messages will be at the loudest as well. If you want to adjust the volume follow these steps: go to settings --> personal --> profiles --> choose any profile that you want to be activated on your phone --> options --> personalized --> ringing volume --> choose from volume 1 to 5 as the loudest --> press ok then click back once --> options --> activate
You will have to get your cellphone repaired that is the only solution to fix this problem.IF it is under warranty then please get it replaced. You can try taking the phone apart if you want and clean and reattached the connections to the speaker in the phone.
Good luck, Please don't forget to rate the solution.
Welcome to FixYa
You can Adjust your Ringer Level to High...If your Ringer is in Full Volume and No Sound/Bad Sound-the Problem is with Buzzer or Board Complaint[Board complaint in Rare Case]
Ringer Option in 6300:
'Incoming Call alert'[Must be in RINGING]
Move to Bottom 'RINGING VOLUME'[move to Right side-now you can Hear Sound-Set to High Level or as you Like
It may ask for Confirm Selection of high Ring Vol
Alert For 'ALL CALLS'[at Bottom]
Then Activate GENERAL
You are Done[In this way -you can Select any Profile]
Hope this Helped -Dont forget to Rate ME......Thanks for Contacting FixYa...
Do a battery pull by removing the battery, and make sure to give it time to completely boot up. If you are texting while you are receiving messages which is very common, sometimes it eliminates the sound while you are texting because it cannot render the sound while you are a sending a message. If thats not the case, then make sure to go to your sound settings and turn it completely up, if that doesn't work try to apply a different alert ringer for it.
what you do is you go to main menu then go to settings then sounds find alert sounds or somthing simular to alerts or messenging and select that option and set ringer volume and or ringtone hope that helps you
menu 2 settings 3 tones incoming call alert (set to ringing) ringing tone ( pick your ring tone) ringing volume (set to level 5 loudest) vibrating alert (on) message alert tone (pick tone) instant message alert tone (standard) keypad tones (on) warning tones (on) this is for the alarm and ringtone this is where your problem is so double check these settings ok alert for (all calls)
Use this menu to customise various sound settings.
Use this menu to select a volume level and alert type
for incoming calls.
• Alert type: specify how you are to be informed of
• Ring tone: select a ringtone for the call ringer.
• Volume: select a ringer volume.
Use this menu to select the tone that the phone
sounds when you press a key.
Use this menu to set up the ringtone for incoming
• Tone: select one of several message tones.
• Alert type: specify how you are informed when a
message comes in.
• Repetition: specify how often the phone informs
you of a new message.
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Use this menu to set how the phone acts to alert you
to a specific event in Silent mode.
Use this menu to customise additional tones for the
• Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
• Connection tone: set the phone to beep when an
outgoing call is connected to the system.
• Alerts on call: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
• Indicative tone: set the phone to beep when a
pop-up window displays.
hi follow these instructions 1 menu 2 settings 3 tones incoming call alert (set to ringing) ringing tone ( pick your ring tone) ringing volume (set to level 5 loudest) vibrating alert (on) message alert tone (pick tone) instant message alert tone (standard) keypad tones (on) warning tones (on) this is for the alarm and ringtone this is where your problem is so double check these settings ok alert for (all calls)
once you have done them settings try your phone and see if it works if not then follow these instructions 1. menu 2 settings 3. profiles 4 general then personalise the set like this Incoming call alert (ringing) ringing tone (choose ringtone) ringing volume (level 5 ) vibrating alert (on) message alert tone (choose tone) instant message alert tone (standard) Keypad tones (on) warning tones (on) alert for (all calls) once you have changed the last setting press back then select activate your phone should be now be working if not let me know ok