Question about Sansui Combination Televisions

3 Answers

TV code We have just obtained a second hand 1999 Sansui TV, model COM3100. Trying to find the code to reset our NexXtech universal remote control. We do not have the manual. This TV has a built in VCR and the screen size is 13". It works very well using basic hand operation.

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 50 Answers

SANSUI ......................................... 0310

Posted on Dec 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,800 Answers

Try 0310

or seek for it in this little wikki

http://kbase.x10.com/wiki/Four_Digit_Universal_Remote_Code_List

Posted on Dec 05, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 237 Answers

Try 0463. If it is a 3-digit code try 463. 102, 191, 148

Posted on Dec 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a code for my remote control?


Hello
You hven't given any specification of the remote control you have. Yet I hereby send you universal remote codes for Sansui herewith.
Three digit universal remote codes for Sansui are:
135/ 136
Four digit codes to check with are:
0135 0310.
Four digit code for Sansui TV/VCR cobo is:
0310
  1. .

Nov 02, 2011 | Sansui COM312AD 13" TV/VCR Combo

1 Answer

How do you open up the auxillary without the remote?


Hello
As there is no "Meny" button on the front panel of your tV, it is not possible to select its inputs. Just buy one orginal remote control of this device, or buy a unversal remote control which has setup codes for your Sansui combo. Some universal remote codes for Sansui combos are 0394 0967 & 0310. Just look for a suitable universal remote control, which ahs setup codes with your Combo. you will get these details from the broshure of the remote control. OK.

Sep 26, 2011 | Sansui COM1912 19 in. Combo

1 Answer

Code for universal sony remote sony-v201


Hello
Sorry to say that Sansui is not listed to Sony V201 remote control. Anyway I'll give you some three digit and four diit conds for Sansui. I'm not sure will it work, but try these, sometimes you may get.

Three digit universal remote codes for Sansui are:
135/ 136
Four digit universal remote code for Sansui TV/VCR combo is
0310

Four digit universal remote code for Sansui TV are:
0135 0310

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

NOTE: Switch OFF and switch ON your combo with its FRONT PANEL POWER ON-OFF SWITCH each time before trying an other code.
Hopes you will be helped.
OK.

Jan 27, 2011 | Sansui COM312AD 13" TV/VCR Combo

1 Answer

I have a sanyo remote and a sansui tv how do i program the tv


Hello

I don't have a code for Sansui TV to be programmed with Sanyo remote control But hava a philips Universal remote model which can be programmed for Sanyo TV and has its codes.

Remote Model ===> Philips CL 034 Universal Remote Controller.
Codes
0115 0632

And herealong with I sends some universal remote codes, that you can check it for.

Four Digit Universal remote code for Sansui TV are

0135 0310

Three digit universal remote code for Sansui TV are

135/ 136

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.




Nov 25, 2010 | Sansui Combination Televisions

1 Answer

Hi Iam trying to program a universal remote control to my sansuni tv vcr dvd combo but haven't had any sucess. I have tried to do it with several different universal remote but none of the codes seem to...


How old are the remotes relative to the TV in question? If the remotes are older than the TV or were programmed within 6 months of this TV being released, then the code you need wasn't included in the remote's programming. In addition, unfortunately, many universal remotes do not work on combination TVs (with the DVD player and VCR built-in).

You can try to search through all the codes for the remote if your remotes have that feature. (On RCA remotes, turn on the TV, press and hold the Code Search button until the indicator light comes on, then press and release the TV button. Then press the On/Off button repeatedly until the TV turns off. Press Enter and see if the other functions of the remote work. If they do not, repeat the search. Then do the same but press the DVD and VCR buttons instead of the TV button.)

More likely you need a newer universal remote, a programmable (via computer USB) universal remote or a substitute remote from the manufacturer. See http://www.remotes.com/remotes/servlet/rs?a=gmi&uuid=12845952409830&smodel=TDC2075&brand_pn=SANSUI_TDC2075 for an exact substitute remote that will replace the original remote.

I hope this helps.

Cindy Wells

Sep 15, 2010 | Sansui TDC2075 20 in. TV/VCR/DVD Combo

1 Answer

I need the Zenith remote control code for the 1986 Zenith TV


joe, the remote control codes are not the same from vendor to vendor. I think you're trying to program a universal remote control to operate your tv, if this is so, you will need to get the model number of the universal set and refer to the product code list, look under tv and zenith, another procedure you may try is the code search, this puts out all the available codes programmed into the universal set, just follow the instructions and be very patient because like I mentioned it will take you through all the available codes untill it will send the correct one for your zenith tv.

Feb 10, 2010 | Combination Televisions

1 Answer

I have a tv/vcr combo sansui tv with no remote and i have universal remotes which none of the sansui codes work. Any suggestions? What company makes Sansui?


Hi! actually most sansui are manufactured from china, so you should try the codes designated on china brand of tv"s.

Oct 16, 2009 | Combination Televisions

2 Answers

Universal remote wont work with this TV


Questions: Who is "Sansui", the digital box ? or the TV? Is the "digital box=remote control"? turn on what you want to control.
Face the RC face down or away from TV,or whatever you want to control. Usually:: push & hold TV & SEARCH button until light blinks, two, three times? FACE THE TV and put the code for the [TV=Sansui ?] You said #189 try 0189 [zero,one,eight,nine]
2nd) TV power ON!,....HOLD down (and if you have a SEARCH) button and the tv power button on RC, two or three blinks, push up arrow once, press power button for TV on RC, nothing!, continue...up arrow, power button. when the TV turns off, you have found the code,. YOU MAY HAVE TO DO THIS 50-150 TIMES because the RC is looking through EVERY code!

Sometimes

Apr 26, 2008 | Sansui CDVD1300W 13 in. TV/DVD Combo

5 Answers

I need a Universal Remote code for this model.


I got it to work with code 12002. I have the Comcast DVR Remote.

Dec 04, 2006 | RCA 20F510TD 20 in. TV/DVD Combo

Not finding what you are looking for?
Combination Televisions Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sansui Combination Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sansui Combination Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...