Question about Bulova Watch

Open Question

Setting a Benrus Digital/Analog Watch

I can't find the instructions for setting this watch. Can anyone help?

Posted by on

6 Suggested Answers

  • 1 Answer

SOURCE: Getting analog part of Mossimo watch to start

FIXED!!!

As it turned out these Mossimo ANA/DIGI watches use two different batteries, one for the digital part (big) and other for the analog mechanism (small).

Have the watch serviced to change the second battery and VOILA!!!!

Enjoy!
Mivales.
Made in Costa Rica!!

Posted on Sep 24, 2008

  • 1 Answer

SOURCE: how to set up ladies roxy digital watch

I found users instructions on roxy website at:
http://www.roxy.com/search/index.jsp?f=Taxonomy%2FROXY%2F2818169&categoryId=2818071&f=Taxonomy%2FROXY%2F2818071&fbc=1&fbn=Taxonomy|Watches&fbx=0

We were able to program our watch completely!!!

If you look on the back of the watch that you bought on the metal plate, it tells you the style. Ours was the Roxy 70's digital watch, and I found specific instructions at (even if this is not your style, the instructions may work):
http://www.roxy.com/graphics/uc/roxy/manuals/Roxy_manual_watch_70s.pdf

Posted on Dec 23, 2008

escapement
  • 2334 Answers

SOURCE: How do I reset the analog watch hands on this model?

Follow this link:

http://world.casio.com/wat/download/en/manual/

Rate me, please.

Posted on Mar 22, 2009

  • 1 Answer

SOURCE: cant se time Citizen 8988-q02047 HSB wristwatch

In the time mode, press the upper right button for 2 seconds and the time display will flash. Then press the same button untill the entire time will flash, or both hour and minutes flash at same time. When the hour and minutes flash at same time, this adjust mode is the adjusting of the analog left display (A1). Now, press the lower button for adjusting de hour shown at the digital display that shows the same hour at analog display. This method is to adjusting the 8982 that is the "father" of 8988. Like a Citizen collector, and don´t know any website that you can view the setting instruction of 8988, only the 8982 is disposable here: http://www.citizenwatch.com/downloads/techguides/8982.pdf

Posted on Aug 11, 2009

  • 2501 Answers

SOURCE: lost instruction to a digital/analogue pod watch

This watch appears to be made by "Suunto" and if you go to their web site, you should be able to find your watch detailed there.

If you then go to "support center", you will see "download center and user guides.

Posted on Jan 05, 2010

  • 1 Answer

SOURCE: Watch settings

Press MODE and it jumps to Timer. Press mode again and jumps to ALARM set. press MODE quickly and jumps to time set. press START/STOP to reset and press RESET to change to minutes or hours. press RESET again and changes to Date Set...

Posted on Nov 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the correct time set in the watch, the main analog clock shows the correct time, but the UTC analog hands19:00 when the UTC digital time is 12:00. How do I reset the UTC analog hour hands?


The hands are driven by the digital. It seems to me you have the wrong digital city. Please review the setting instructions for your Skyhawk at: http://www.citizenwatch.com/

BTW, I love my Titinimum Skyhawk

Aug 03, 2011 | Citizen Skyhawk Eco-Drive JR306059F Wrist...

1 Answer

I have a Benrus 737 watch ;with no operating instructions. It was purchased from Wal-Mart as a gift approximately 10 years ago.


The Benrus watch you have is not the Benrus watch that became world famous years ago. In fact, "The Benrus Watch Company" went bankrupt in the late '70s . However, the Benrus watch that you have is made by Benrus (not the original one) and you can contact them via email: Contact Steve Laughlin sl@benarus.com for the information you're looking for.

Melvin, I hope this helped you. Please let me know. Thanks.

Jul 06, 2011 | Watches

2 Answers

I accidentaly reset time & date on my square arnette watch and i need help to set it


Thank you for contacting FixYa.
    Set Digital Watch
  1. Press and hold the "Mode" button on the right side of your Arnette digital watch for three seconds to change the watch's mode. Press and hold the "Mode" button repeatedly until flashing digits indicate that you have entered the watch's time-setting screen.
  2. Use the top and bottom buttons on the left side of your Arnette digital watch to increase and decrease number values as desired.
  3. Press and hold the "Mode" button repeatedly to exit the time-setting screen and return the watch to time-telling mode.
  4. Set Analog Watch
  5. Pull out the watch crown on the right side of your Arnette analog watch.
  6. Turn the watch crown clockwise to adjust the hands of your Arnette analog watch to the appropriate time.
  7. Push the watch crown back in when you are finished setting the time on your Arnette analog watch.
Best regards. Jewel

Sep 09, 2010 | Watches

1 Answer

Casio telememo combination watch instructions


http://world.casio.com/wat/download/en/manual/

There are so many applications use of the manual will be mandatory.

Use the four numbers on the back of your watch and you will have a PDF version of your instruction manual.

Hope this tip helps

R/

David

http://antiqueclock.clockstop.com/

Mar 15, 2010 | Casio DB360G-9A 30 Pages Telememo Watch

1 Answer

Setting Analog Hands


I can't find the instructions for this watch but Casio instructions may be similar, so you could try this:-

Press the "mode" button until you get an abbreviated message for hand setting mode (HS?)

When in this mode, I expect that two of the other buttons make the hands go forward or backward.

Some experimenting will be required. When you have finished, press the mode button until normal operation has been achieved.

Good luck!

Feb 10, 2010 | Sector 450 2653450035 Wrist Watch

1 Answer

RE: G-shock giez 1050 watch. we are having trouble setting the analog and digital time the same we have digital right but analog is 15 mins behind can you please help


To set the analogue to the digital time press the mode button (lower left until "HS" appears. Then use the two buttons on the right to advance or ****** the hands.

(these instructions are for my watch but I think that your will be the same. If not, go to the Casio web site (casio.com) select support, manuals, watches, agree terms and then watch manuals archive; fill in your watch details and download full instructions.

Jan 20, 2010 | Watches

1 Answer

Can't adjust the date on a digital watch


These are the instructions for the AD0721. They might apply to your model, too. I hope this helps:

http://img261.imageshack.us/img261/6784/manualr.jpg

The analog setting of the watch takes place by pulling out the knob (kind of tough) and adjusting, like a regular analog watch. The analog and digital displays are will NOT stay in sync, unfortunately.

Good luck.

PC

May 26, 2009 | Watches

3 Answers

How to set the digital and analog as the same time


They are supposed to move in unison, if you are setting the digital time and the analog is not moving, there is a problem with the watch and it could need service. Here is a link to the manual for the watch, the movement for the Blue Angels is a C300 and you will see the manual also states the time mechanisms move in tandem.
http://www.citizenwatch.jp/support/pdf/coa/c300.pdf

Citizen does have service centers all over the globe, I am sure you can get the watch fixed if it does need service, You can find the local service center at the Citizen web site. Hope that helps.

Jan 30, 2009 | Citizen Blue Angels Skyhawk Watch

2 Answers

Cant se time Citizen 8988-q02047 HSB wristwatch


In the time mode, press the upper right button for 2 seconds and the time display will flash. Then press the same button untill the entire time will flash, or both hour and minutes flash at same time. When the hour and minutes flash at same time, this adjust mode is the adjusting of the analog left display (A1). Now, press the lower button for adjusting de hour shown at the digital display that shows the same hour at analog display. This method is to adjusting the 8982 that is the "father" of 8988. Like a Citizen collector, and don´t know any website that you can view the setting instruction of 8988, only the 8982 is disposable here: http://www.citizenwatch.com/downloads/techguides/8982.pdf

Nov 20, 2008 | Citizen Watches

1 Answer

Analog hands not moving but digital part works fine.


A Benrus advance is not a Casio PRG-60T Tough Solar Protrek watch. You posted your query in the wrong place.

Jun 20, 2008 | Casio Triple Sensor Pathfinder PRG60-1AV...

Not finding what you are looking for?
Bulova Watch Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bulova Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Geoff

Level 2 Expert

66 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Bulova Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...