Question about Kodak EASYSHARE 5500 All-In-One InkJet Printer

3 Answers

Take printer head out of 5500 all in one kodak ?

How to take printer head out ?

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

If you have a bad printhead contact Kodak by phone or email and go thru a few test if Kodak says you have a faulty printhead they will ship you a new one alone with new ink tanks FREE of charge and by overnight air. to remove printhead look at the bullseye and move your finger to top far left and push up on small clip and head will unlock for removal. Hope this info helps

Posted on Dec 18, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Right above the little sticker with the finger and black bullseye, there is a little clip. simply push the clip and it will pop right out. It took me a while to figure it out as there is nothing online that tells you what to do. Hope it helps!

Posted on Dec 17, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Where can i get a printer head 5500 and how much does it cost

Posted on Dec 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Carraige head is locked in place on my kodak easy share 5500


Hi,

go to www.kodak.com/go/itg. Choose All-in-one printer - Cannot replace ink (printhead not moving to center position) and follow the step by step solution.

Mar 05, 2010 | Kodak EASYSHARE 5500 All-In-One InkJet...

2 Answers

Print head not working


You can call kodak and as far as i know they will replace the printhead for free 1800 421 6699.

Oct 02, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Kodak 5500 printer can't detect print head


open the cover and take out the printheads and clean the contact points. also clean the contact points on the printer.
reinstall it and see what it does,also try turning the printer off and on /
if this does not work you need a new printer /the printer hardware is bad for sure if you have already replaced the printhead and catridge .

if printer is in warranty ask for a replacement

Aug 28, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Light copies


You will need a new head. Call 1.800.421.6699to get one.

Mar 11, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

My Kodak 5500 printer does not print in black ink.


have seen this over and over again- the print head is bad. call Kodak at 800 421-6699 and let them run you thru some tests then they'll ship you a new one

Feb 11, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

2 Answers

Change printhead in 5500


To change the printer head on the Kodak 5500 AIO printer, you will need to do the following:

To remove the old printer head,
  1. Power on the printer.
  2. Lift up the lid to expose the printer head.
  3. Once the printer head moves to the middle, where you can get at it, then unplug the power cord to the printer.
  4. Remove the ink cartridges.
  5. With the printer head now empty, run your finder along the underside of the top of the printer head, all the way to the left side of the printer head.
  6. Push up with your finger where there is some give, and the shroud that holds the printer head will release the head.

To install the new head,

  1. Simply put it in place, and push forward with your finger on the sticker that shows a finger pushing on a sticker, and you will hear and feel it click into place.
  2. Reload your ink cartridges, close the lid, plug the printer back in and you're done.

Nov 29, 2008 | Kodak 5500 ALL-IN-ONE PRINTER

1 Answer

Kodak easyshare 5500 I put new col cartriage in and my photoes are pinky purple tryed to clean heads but still the same


I think you'll need a new printhead if it's not printing color or B&W. Call kodak at 1.800.421.6699 to get one.

Oct 11, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Copies are coming out pink


Call Kodak Support at 1-800-421-6699. Sounds like your print head. They are excellent and solved my problem with next day supply of new print head and ink cartridges Free. Amazing service and great Kodak 5500 AIO printer.

Good luck.

Joe J

Jun 20, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

2 Answers

Black INk Problem


Try calibrating and cleaning the printhead in the kodak aio home center software.

Dec 19, 2007 | Kodak EASYSHARE 5500 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5500 All-In-One InkJet Printer Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Cindy Wells

Level 3 Expert

4949 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...