Question about Epson Stylus CX6000 All-In-One InkJet Printer

Open Question

Loud Clicking/Grinding noise just before Hp c4280 prints

Think its near the print cartridges in front seems to be before


printing starts.

Have never had a problem with this printer before.

Posted by on

  • Anonymous Mar 17, 2009

    My HP C4280 sounds like automatic weapon fire when I try to print. It is coming from the ink cartridge area...tried replacing them..still the same issue. Any suggestions would be appreciated.

×

6 Suggested Answers

  • 1 Answer

SOURCE: Printer won't print

If the ink is too low the head cleaning won't work. Also, I have had to do the cleaning functions several times for it to work. Will it print a test page? Look in to reinstalling a print driver.

Posted on Nov 01, 2006

Inky
  • 691 Answers

SOURCE: Epson stylus photo 830

Yes it can probably be fixed. I hope you poked your friend in the eye for giving you such a headache though. You will need to dismantle the machine and remove the Auto Sheet Feeder (ASF) Once removed, check there is no bits of paper stuck inside. Then turn the pick up mechanisme by hand through a couple of revolutions to re synch everything. Also check the paper sensor is still intact - if not you can construct a new one from a piece of plastic or if the old one is still present, just glue it back together. You can download a service manual to hep you out with the dismantling from either: http://www.TheServiceManualShop.com http://mikeburton.tradebit.com/

Posted on Apr 12, 2007

  • 4 Answers

SOURCE: Epson Printer - Skipping When Printing Black

If you try the print head alignment or head cleaning wizard under the maintenance tab, they may help!

Posted on Jan 08, 2008

  • 68 Answers

SOURCE: Epson RX500 printing problems

Please go to my website http://www.the-inkstore.co.uk . I have the latest version of SSC Service Utility to download directly onto your computer and instructions on how to use it, what to click on etc etc. Click any of the Epson links if you can't find it, everything you need to know will be there, including printer Firmware resetting which sorts out a multitude of problems.

The 'maintenance required' problem with Epson printers has absolutely nothing to do with which cartridges you are using, it is a built in page counter in your printer firmware, which has a different maximum amount for each Epson model. Don't listen to old wives tales and heresay, we are the experts and it's an Epson scam to cause a lot of people to pay for maintenance or throw their printers away.
I haven't found a model that can't be reset with the latest version of SSC Serve or the manual reset on my site.

For Epson RX500 users there is also a manual reset on my site, as the SSC Serve software won't do it for you.
When using the program & choosing your printer from the list, it may have a weird name with 'x' in the model number, this is because some configurations are for many models in a series. For example, the C46 will be listed as C4x as it is for the C42, C44 & C46 models.

I hope this helps all Epson users to overcome the Epson scam of page counting and locking out until you pay their dealers money for maintenance.

If you like what I've done for Epson users, please show your appreciation by spreading the word and perhaps buying your ink from my site.

Happy trouble free printing

The INK Store (UK & Europe)

Posted on Jul 15, 2008

diddydaveh
  • 154 Answers

SOURCE: Epson Stylus CX6400 not printing

Hi, below the belt that pulls the head from left to right is a 'bail bar' which the head moves along. Put a little light oiul on the bar, check for any bits of paper jammed in the mechanism which may be obstrucring the print head.
Also check that the bushes which support the print head haven't been dislodged. You can tell because there will be a strange looking doughnut type thing sitting and looking lost on the bail bar. you can usually just push this back into place on the side of the print head.

Posted on Dec 06, 2008

  • 23 Answers

SOURCE: How do I install ink cartridge for hp photosmart C4280

To replace the print cartridges
1. Make sure the HP All-in-One is on.
CAUTION: If the HP All-in-One is off when you open the print cartridge door to
access the print cartridges, the HP All-in-One will not release the cartridges for
changing. You might damage the HP All-in-One if the print cartridges are not
docked safely when you try to remove them.

2. Make sure you have letter or A4 unused plain white paper loaded in the input tray.

3. Open the print cartridge door.
The print carriage moves to the far right side of the HP All-in-One.

4. Wait until the print carriage is idle and silent, and then lightly press down on a print
cartridge to release it.
If you are replacing the tri-color print cartridge, remove the print cartridge from the
slot on the left.
If you are replacing the black or photo print cartridge, remove the print cartridge from
the slot on the right.
1 Print cartridge slot for the tri-color print cartridge
2 Print cartridge slot for the black and photo print cartridges
5. Pull the print cartridge toward you out of its slot.
6. If you are removing the black print cartridge in order to install the photo print cartridge,store the black print cartridge in the print cartridge protector or an airtight plastic container.

7. Remove the new print cartridge from its packaging and, being careful to touch only
the black plastic, gently remove the plastic tape by using the pink pull tab.
1 Copper-colored contacts
2 Plastic tape with pink pull tab (must be removed before installing)
3 Ink nozzles under tape

CAUTION: Do not touch the copper-colored contacts or ink nozzles. Touching
these parts can result in clogs, ink failure, and bad electrical connections.

8. Slide the new print cartridge forward into the empty slot. Then gently push the upper
part of the print cartridge forward until it clicks into the socket.
If you are installing the tri-color print cartridge, slide it into the left slot.
If you are installing a black or photo print cartridge, slide it into the right slot.
Work with print cartridges 69
Maintain the HP All-in-One

9. Close the print cartridge door.
If you installed a new print cartridge, the HP All-in-One prints a print cartridge
alignment page.
10. When prompted, ensure plain white paper is loaded in the input tray, then press the

button next to OK.
NOTE: If you have colored paper loaded in the input tray when you align the print
cartridges, the alignment will fail. Load unused plain white paper into the input
tray, and then try the alignment again.

11. Place the page print side down on the scanner glass and then press the button next
to OK to scan the page.
When the On
Please Don't forget to rate this solution. Thanks.

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Clicking noise when printing


Had similar problem. Putting my hands on the front surface of the printer, the click seemed to be felt strongest in front of the pink ink cartridge. I took the cartridge out, looked at the back of it, where there's a little black wheel, and tried turning it. That wheel was stuck (whereas the other colors & the black would turn). Tried printing with the pink cartridge out and no more clicking noise. I guess I'll just replace my pink cartridge. Maybe see if there's a similar problem with one of your cartridges?

May 13, 2010 | Samsung CLP 300 Laser Printer

1 Answer

HP photosmart C3180 makes a loud clicking noise when printing first page.


After inserting new cartridges in the photosmart C3180 and closing the door it makes loud clicking sound coming from the cartridge area and won't print.

Nov 05, 2009 | HP Photosmart C3180 All-In-One InkJet...

1 Answer

My HP Photosmart C4280 All in one is all of a sudden making a loud clicking sound when I print. It just started doing it when I printed the next page.


>an unusual noise in the printer could be problem with printing mechanism or a carriage is jammed, try this steps about carriage jam and see if this will resole the issue

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01309787&cc=us&lc=en&dlc=en&product=3192753

Oct 03, 2009 | HP PhotoSmart C4280 Laser Printer

1 Answer

I can no longer print from my Mac to my HP Photosmart C4280. This happened after changing the ink. The following occurred when I tried to troubleshoot: Network Diagnostics was able to connect to the...


I can no longer print from my Mac to my HP Photosmart C4280. This happened after changing the ink. My HP icons are no longer in menu bar either. When I try to print the HP makes a loud noise and shoots the paper through at rocket speed with terrible print quatlity.

Aug 30, 2009 | HP Photosmart C4280 Aio Printer

1 Answer

Hp 2115 - clicking noise from carriage, can`t print test page


I have an HP 6110 is always has a grinding noise.No functions work. HP just want me to buy a new machine. They are bad quality 3 in one's. That is for sure.

Jun 28, 2009 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

HP Deskjet 1320 printer makes grinding noise and stalls before it prints


I think the noise is normal for hp deskjet. When starting up, the printer read the head existence, and do cleaning. is it the first replacement cartridge? Disable ink status monitor.

May 29, 2009 | HP Printers & Copiers

1 Answer

Won't print. makes loud clicking noise from right side front of unit (ink cartridge parking area)


Please have a look at the noise troubleshooter available for your printer at the HP online support site. Click here

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!



Apr 29, 2009 | Printers & Copiers

1 Answer

Samsung 3160N - clicking sound but printing okay


Check the toner cartridge make sure it is all the way in. Also full out all those toner cartridges and check the gear that rotates when you print see if there is no broken teeth. This happens on mine too.

Mar 05, 2009 | Samsung CLX 3160fn All-In-One Printer

1 Answer

Makes noise


Click HERE for HP troubleshooting for your printer.

Jun 06, 2008 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Loud grinding noice before starting to print


Mine makes a grinding noise when scanning or making copies. As long as everything is working, I just tolerate the noise in which the rest of the staff find amusing at first and then ignore it as I do.

Jan 25, 2008 | HP PSC 1210 All-In-One InkJet Printer

Not finding what you are looking for?
Epson Stylus  CX6000 All-In-One InkJet Printer Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Cindy Wells

Level 3 Expert

4758 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...