Question about E-Machines eMachines Desktop PC

1 Answer

My package was left on the front step but wasn'st here when I got Home why was this left on my front step?

Posted by on

  • JerryWoods Dec 05, 2008

    How could some running a Gateway Corpperation be so incompadent to send a package with no notifacation or requiring a signature? I can't even talk to anyone with the ability to explain the status of this issue! Call me 504812-2870

  • JerryWoods Dec 07, 2008

    The lady down the street gave me the package and I returned it with the return lablel. There is no longer a problem. So you see there's no more reason to email me any more.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 162 Answers

I think that's something that you need to take up with the Outlet you purchased it from, as they specifically deal with a certain courier to guarantee a safe delivery. You can also go straight through to the Courier who were responsible for delivering it, but I reckon you'll be going round in circles if there was no proof that the delivery driver attempted to leave a note through your door, as this is what they are supposed to do if a delivery cannot be made. Then it would be upto you to either of Arranged a Re-delivery date or collect it ftom their depot.

Posted on Dec 04, 2008

  • Gav Shaw Dec 05, 2008

    Just seems like it's your word against theirs when it actually comes to prooving that the delivery driver was thick enough to leave something of value outside your premises.
    Your obviously aware that it was delivered, so I guess someone must of seen this driver leave empty handed? 
    Also like you say, the driver would be required to take a signature for goods delivered, so obviously he's gonna need to explain why he's not got one, unless of course he's signed for it himself and tried to pull a fast one against you.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My panasonic says f61 when i switch it on wat do i do


An F61 error occurs on a Panasonic home theater system when the speaker cable wire connections are wrong. This situation is likely to happen if you just purchased your unit or moved the system and try to reconnect the speakers again. Polarity is key in a successful setup. The positive and negative ends of the cable wires must match the input of the main unit. Retrace your speaker wire connections to clear error F61.
Step 1 Attach the speaker labels to the speaker wires for easier identification, if they're not already labeled. At minimum, labels for front left (L), front right (R) and center speakers should be included in the packaging contents that came with your system.
Step 2 Verify that the white ends of each speaker cable are connected to the corresponding "+" positive inputs for each speaker.
Step 3 Verify that the blue ends of each speaker cable are connected to the corresponding "-" negative inputs for each speaker.
Step 4 Push the plastic ends of the speaker wires on each speaker to verify that each is locked into place.
Step 5 Connect the remaining end of the "Front (L)" speaker wire to the white terminal/connector on the main unit.
Step 6 Connect the remaining end of the "Front (R)" speaker wire to the red terminal/connector on the main unit.
Step 7 Connect the remaining end of the "Center" speaker wire to the green terminal/connector on the main unit.
Step 8 Connect the remaining end of the "Subwoofer" wire to the purple terminal/connector on the main unit.
Step 9 Connect the remaining ends of the "Surround (R)" and "Surround (L)" speakers to the wireless system.

Sep 11, 2016 | Panasonic Audio Players & Recorders

1 Answer

Tracking #1z21E20F0314889228 where is my package,was not left on porch.


You have the tracking number. Please contact the company that was supposed to deliver the package.

Dec 16, 2014 | Toys

1 Answer

The arrival time for a greyhound bus that left 8pm Friday night from Ardmore OK, to Philadelphia PA. All I know is that it's supposed to arrive sometime Saturday.


PHILADELPHIA GREYHOUND
1001 FILBERT ST
Philadelphia, PA 19107

Telephone Numbers
Main: (215) 931-4075
Baggage: (215) 931-4016
Greyhound Package Express: (215) 931-4016
Customer Service: (215) 931-4075

Aug 30, 2014 | Cars & Trucks

1 Answer

Whirlpool calypso washer smells how to get rid of ordor


Removes odor causing residue in front loading (HE) washers. Keeps your machine fresh and clean. Package includes 3 tablets. For front load washers only.

Here is what you need.

Oct 18, 2012 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

After the front fork seals were replaced it wobbles severely at low speeds


If it wasn't wobbling before you replaced the seals then retrace the steps taken to replace them. Apparently you left something off.

Oct 06, 2012 | Honda GL 1500 SE Gold Wing Motorcycles

1 Answer

P0171


Ho Joanne:
On Grand Cherokee oxygen sensor locations for 4.0 and 4.7 engines, check this diagrams...


12_18_2011_2_25_33_pm.jpg


12_18_2011_2_26_23_pm.jpg

The Oxygen Sensors (O2S) are attached to, and protrude into the vehicle exhaust system. Depending on the emission package, the vehicle may use a total of either 2 or 4 sensors.

Federal Emissions Package (4.0L and 4.7L engines):
Two sensors are used: upstream (referred to as 1/1) and downstream (referred to as 1/2). With this emission package, the upstream sensor (1/1) is located just before the main catalytic convertor. The downstream sensor (1/2) is located just after the main catalytic convertor.


California Emissions Package (4.0L engine):
On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the rear/upper upstream sensor (2/1) is located in the exhaust downpipe just before the rear mini-catalytic convertor. The front/upper upstream sensor (1/1) is located in the exhaust downpipe just before the front mini-catalytic convertor. The rear/lower downstream sensor (2/2) is located in the exhaust downpipe just after the rear mini-catalytic convertor, and before the main catalytic convertor. The front/lower downstream sensor (1/2) is located in the exhaust downpipe just after the front mini-catalytic convertor, and before the main catalytic convertor.


California Emissions Package (4.7L engine):
On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the right upstream sensor (2/1) is located in the right exhaust downpipe just before the mini-catalytic convertor. The left upstream sensor (1/1) is located in the left exhaust downpipe just before the mini-catalytic convertor. The right downstream sensor (2/2) is located in the right exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor. The left downstream sensor (1/2) is located in the left exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Dec 13, 2011 | 1999 Jeep Grand Cherokee

1 Answer

I opened my X018 Camera package and there wasn't any software or instruction book included. Please help. drypete@aol.com


-Using the USB cable that came with the camera, connect the wider end of the cable to your computer and the smaller end to your camera, on the left side.
-Power on the camera. After a few seconds a new window will appear on the computer screen. The new window allows you to use the Scanner & Camera wizard to move your pictures to the computer. Select the wizard and follow it's steps to approve the new location for your pictures and then proceed.
If you don't have the USB cable, remove the memory card from the bottom of the camera and find the part of your computer labeled Media Cards. Insert your memory card into the slot labeled SD. After a few seconds a new window will appear on the computer screen. The new window allows you to use the Scanner & Camera wizard to move your pictures to the computer. Select the wizard and follow it's steps to approve the new location for your pictures and then proceed.

May 09, 2011 | Vivitar Cameras

1 Answer

Bottom right button is light, not EI. top left is adj button left is mode top right is st/stp. I can't set time and date and can't turn off my alarm


hi..

El stands for


To set the time
  1. Press and hold [ Adj button ] till the digits on screen starts blink.

  2. Now Press [ Mode Button ] repetitively to cycle through Hour -> minute -> Seconds

  3. Press [ ST/STP button ] to adjust the value. Each press will increase the value.

  4. Press [ Adj Button ] again to save the changes


To set the alarm

  1. Press [ MODE Button] till it displays Alarm Time.

  2. Repeat steps 1 to step 4 as described in 'To set the time'


  3. Different watches have different procedures to active the alarm. Common method is pressing a button briefly.
    Since model of watch is not specified, Try pressing [Adj Button] or [ST/STP Button].

Mar 18, 2011 | Watches

1 Answer

Lamp replacement


Sure, I do by myself. Seat on the floor in front of the TV

!st. step: Grasp both side of the silver front cover with your
fingertips and pull it from projection display.
Then remove it.

2nd. At your left hand you can see a black knob. Turn the
open/lock knob to the left. Pull the black unit that have
the lamp inside. Cover out and down to open.

3rd. Loosen the lamp (black unit) screw with screwdriver.
Grasp the handle of the black unit lamp and slowly
remove the unit.

4th. Insert the new lamp black unit being careful. Tighten the
black unit lamp screw with a screwdriver.

5th. Close the lamp cover. Turn the lock/open knob to the
right.

6th. Replace the silver front cover. Finished.

R. Vega from Puero Rico

Apr 28, 2009 | Panasonic PT-52LCX65 44" HDTV

1 Answer

I had a front left head lamp bulb replaced midmorning today.


i doubt there would be any connection with a head light bulb

Mar 26, 2009 | 2007 Chrysler Pacifica FWD New Cars

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18357 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...