Question about Sony WEGA KE-37XS910 37 in. HD-Ready Plasma Television
A 5 blink error indicates a bad lamp driver. However a lamp may possibly cause this too. I suggest putting a new lamp in if you have one just to verify the lamp is not the problem. If it still fails with a new lamp then the lamp driver is the problem. This part should be replaced by a Sony authorized servicer. The lamp can be replaced easily by you. The lamp replacement instructions are in the TV's owners manual. Good Luck
Posted on Jan 06, 2008
SOURCE: Sony Plasma TV
I had this same exact issue yesterday. I own the same TV model and here is what SONY had me do to get the picture back. Ultimately the picture comes back, but it will be very dim and needs repair. Most likely a power supply issue. Try these steps:
-Press power off or leave with standby light on for 5 minutes (wait the full 5 minutes)
-Unplug TV / Press top buttons 5 times each to remove static from system boards (yes, each button 5 times each)
-Wait one full minute and plug TV in and press power on
Posted on Aug 09, 2008
It's in standby mode.
Do a reset and see what happens
While holding down the reset button on the remote
Press the power button on the tv
(The tv will turn itself off the back on)
Now release the reset button
It sounds like the lamp needs replaced....
Posted on Apr 10, 2009
SOURCE: Sony Plasma TV.
I have the same problem. since I have 3 of these TV's, I switched boards around, and I came to the conclution that is the power board. I will try to repair it, and I'll let you know the component that is bad. Gaston
Posted on Oct 31, 2009
Tips for a great answer:
Jan 30, 2013 | Pioneer PureVision PDP-5040HD 50 in....
May 05, 2009 | Pioneer PureVision PDP-503CMX 50 in....
Aug 09, 2008 | Pioneer PureVision Pro-800HD 43 in. Plasma...
Jun 05, 2009 | Sony WEGA KE-37XS910 37 in. HD-Ready...
510 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: