Question about Epson Stylus 2200 InkJet Photo Printer

1 Answer

I have an Epson 2200 and the Light black ink light is on even thought I have a new cartridge in there. This is the second cartridge I've tried. Same thing. Any suggestions?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Epson Master
  • 541 Answers

This means that your printer wast pad is full this is how you can reset your printer

  1. Turn off the printer power and unplug the power cord from the wall. Disconnect the computer interface cable at the back of the printer.
  2. After one minute reattach the power plug to the wall, but don’t reattach the computer cable.
  3. Hold down the ROLL and the PAPER ADVANCE buttons simultaneously.
  4. Turn the printer on. after 2 blinks, all the ink lights come on, then release the buttons being held down.
  5. Press and hold the ROLL button for 10 seconds.
  6. Release the ROLL button and the printer will initialize, which resets the Waste Ink Pad Counter.
  7. Once initialization is complete, turn the printer power off.
  8. Reconnect the interface cable.
  9. Turn the printer on and print a document.
  10. make sure you have got new wast pads in

Posted on Dec 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have installed a new black ink cartridge. "Ink is out" comes up when I try to print. It is properly installed and is the second new black ink cartridge this has happened with. The "On" and 'Ink" lights...


I have installed all new cartridges. "Ink is out" comes up when I try to print. It is properly installed and is the second set of ink cartridge this has happened with. The "On" and 'Ink" lights do not stop flashing. The printer does not see the new cartridges.

Jan 04, 2010 | Epson Stylus CX4800 All-In-One InkJet...

2 Answers

Printer will not recognize a new full cartridge of ink


See the HP web site http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00489814&dlc=en for resolve.

Apr 28, 2009 | Epson Stylus 2200 InkJet Photo Printer

1 Answer

Which printer should I use


I don't know anything about screen printing, but is there a reason that you can't use a monochrome laser printer for your Black and white...The cost per page is at least 15-20 times less! Especially if you go with HP and get remanufactured cartridges from a reputable source.

Apr 23, 2009 | Epson Stylus 2200 InkJet Photo Printer

1 Answer

Epson 830u Printer Red light stays on even with new ink


I realised that I had to replace both the ink cartridges even though I only wanted to replace the black for it to work. Once I replaced both the black and colour cartridge the red light went off. Thanks

Feb 11, 2009 | Epson Stylus 830U InkJet Photo Printer

1 Answer

Epson 4800 won't initialize after changing black cartridge


Did you change from matte black to photo black? Or vice versa? If so you have to use the ink conversion kit that came with your printer and draw out the old ink and install the new black in cartridge. Try page 113 in your owners manual. I am having a similar problem but with the light cyan and it says "set ink cartridge".

Feb 03, 2009 | Epson Stylus Pro 4800 InkJet Printer

1 Answer

Ink was low I put a new cartridge in still says low wont print.


Hi

try reinstalling the ink. if all fails call epson for replacement ink at 562 276 1300

Jan 02, 2009 | Epson Stylus 2200 InkJet Photo Printer

2 Answers

Epson 2200 ink replacement light stays on


I had the same problem with the light black and light magenta as well. It took trying only one new cartridge with the light magenta before it worked.
The light black took 4 new cartridges before it worked. I had called the Epson support center on this problem and after going through suggestions they made that did not work, I told the guy I had another new cartridge on hand. He said to go ahead and try it. This time the printer worked. He took my name and address and said the other cartridges were faulty. Epson is sending me new replacement cartridges at no charge.

Dec 04, 2008 | Epson Stylus 2200 InkJet Photo Printer

1 Answer

Problem using sublimation inks


Since you are using sublmation ink, the cartridges are probably aftermarket and may not meet Epson standards. Aftermarket chipped cartridges are notorious for failing to 'communicate' with Epson printers, even when the cartridge is brand new. Before taking the printer to a service center, you might try purchasing new cartridges of your ink from your reseller. If that fixes the problem then your fight is with the ink reseller, not Epson. If it doesn't fix the problem and your printer is still under warranty, take it to an authorized service center, and remember, using non-Epson ink does NOT void the waranty.

Jun 16, 2008 | Epson Stylus Photo R1800 InkJet Printer

Not finding what you are looking for?
Epson Stylus 2200 InkJet Photo Printer Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Cindy Wells

Level 3 Expert

4753 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...