Question about Honeywell Electronic Ceramic Heater

Open Question

Need operating instructions for Honeywell Model HZ-365C ceramic h

I have a "Sureset" ceramic heater with adjustable thermostat and two heat settings but have misplaced the programming instructions.

I want the heater to come on in my wine cellar if the temperature dips to 55F and shut off once it heats up to 56F. This is how I maintained a constant temperature last winter and it worked well but I can't recall how I programmed it last year.

Thank you

Posted by on

3 Suggested Answers

SOURCE: Similar model compact heater will not "power up" after storage

they is no reset internal the electronic circuit is deferctive some electronics parts need no be changed. i have fixed one and modify it to be more reliable.

Posted on May 28, 2007

forgot
  • 17 Answers

SOURCE: honeywell hz-341-bl ceramic heater

take a heat gun or a blow dryer and preheat thermostat and any conductive leads.
after a few pre-heats it will get the idea!

Posted on Nov 17, 2007

  • 36 Answers

SOURCE: Hi, Honeywell (HZ-341BL) Ceramic Heater stopped

when most ceramic room heaters stop working, the blower is clogged with lint and dust from floor use . get an air compressor, or a can of air. take unit outside using a small head philips driver remove screws while laying on an old sheet .disassemble cover carefully and blow dust away from you and clean blade without bending with a toothbrush in vinegar water not gettting any liquid on the electrical parts. reassemble. thanks karl

Posted on Dec 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Honeywell HZ-338 thermostat problem


See if there is a little brass-looking bulb on a wire (sensing bulb) inside that can be moved away from the heat. My other thought would be maybe there is supposed to be some insulation between the control unit and the heating element that was inadvertently discarded?

Nov 27, 2013 | Honeywell HZ-338 Ceramic Compact Heater

2 Answers

Honeywell RTH2310 thermostat temp variance


Hi,
Yes you can change that by change the number of cycles per hour that your t-stat looks from for youe furnace. Lower the cycles per hour number and it will increase the range.

You can see how to do it here

http://dl.owneriq.net/3/39359643-dfda-451d-bb81-828eecddd9fc.pdf

I hope that this will help you to solve your problem!

Thanks for using Fixya!!

Heatman101

Dec 12, 2009 | Honeywell Programmable Thermostat Heater

2 Answers

Diagnosing a short cycling honeywell HZ-510 heater


Here is a link to manual and trouble shooting guide. Also service numbers and e-mail contacts. Hope this helps, Thanks and let me know,
Sea Breeze

http://homeappliance.manualsonline.com/manuals/mfg/honeywell/hz510.html

Feb 01, 2009 | Honeywell HZ-510MP Ceramic Heater

1 Answer

Honeywell Ceramic Heater (HZ-370) does not swivel anymore


The instructions say this unit is not designed to be taken apart and they are right. Although i was able to unscrew the back plate and slip my hand into wipe the swivel base. It turns once again and my wife thinks I'm a genius.

Dec 21, 2008 | Honeywell HZ-370 Ceramic Heater

1 Answer

Honeywell thermostat problem


Model number should be on the label inside the tstat

Nov 13, 2008 | Lasko Ceramic Heater w/Adjustable...

1 Answer

Honeywell hz-341-bl ceramic heater


take a heat gun or a blow dryer and preheat thermostat and any conductive leads.
after a few pre-heats it will get the idea!

Nov 15, 2007 | Honeywell (HZ-341BL) Ceramic Heater

1 Answer

Honeywell Surround HZ2200 / HZ2204 /


A link to an Adobe (Acrobat) Reader format (.pdf) owner's manual for Honeywell® (Mini Tower) SURROUND HEAT™ HEATER FAN Models HZ-2200 (charcoal) and HZ-2204 (white) is here.

Some text from the manual:

SET UP
• The Surround Heat™ Heater is designed to
disperse heat in either a 360° range or in one direction only.
• To select the desired heating mode, slide the Direction Control switch, located
on the top of the heater, to the position of your choice:
– to the right (full circle) for 360° Heating
– to the left (half circle) for forward only heating (One Direction
Heating)

OPERATING INSTRUCTIONS
Select the appropriate heat dispersion mode. (See
Set-Up instructions.)
• With the Power knob in the OFF position, plug the
heater into a polarized 120V outlet.
• Turn the Thermostat control fully clockwise to the
HIGH setting.
• Turn the heater on using the Child Resistant switch
(Power knob). To operate the switch, push down
the two sides of the Power knob while turning it
clockwise to the desired position. The power
light will illuminate. The Child Resistant switch helps
ensure that the heater can not be turned on accidentally.
• When the room reaches a comfortable temperature, slowly turn the Thermostat
control counter-clockwise until the heater goes off. This is the point at which the
Thermostat setting equals the room temperature. At this setting, the Thermostat
will automatically turn the heater on and off to maintain this selected temperature.
• Push down and turn the Power knob to OFF and unplug the heater when you
are finished using it.


Nov 04, 2007 | Honeywell Surround HZ2200 / HZ2204 /...

1 Answer

Similar model compact heater will not "power up" after storage


they is no reset internal the electronic circuit is deferctive some electronics parts need no be changed. i have fixed one and modify it to be more reliable.

Oct 01, 2006 | Honeywell SureSet HZ-339BW Ceramic Compact...

Not finding what you are looking for?
Honeywell Electronic Ceramic Heater Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honeywell Heating & Cooling Experts

Bill Long

Level 3 Expert

587 Answers

paulcarew

Level 3 Expert

2364 Answers

Brandon Berry
Brandon Berry

Level 2 Expert

407 Answers

Are you a Honeywell Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...