I have a Sharper Image keychain for digital photos. I do not know what happened to the software, but I need it to upload pics to the key chain. Do you know where I can get it? Seems Sharper Image web site is not up and running
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
like anyother keychai i guess it's a micro USB or other sub usb connection , plug the usb cable into the keychain on one end and at the other end connect your computer, after few seconds of driver installation you should have a removeble drive appera at my computer , thats you keychain
Hope this helps Samantha :)
i would make sure your plugging into a USB2.0 or higher port. and after looking at manual ,there is a reset button you can try ,dont forget to back up photos before you reset.i have had computers in the past that malfunctioned on certain USB ports,but i would try reset before i got to excited.
Start from scratch, uninstall everything and pretend your installing for first time:
1. have keychian unconnected from usb 2. install software 3. DONT RUN SOFTWARE YET 4. connect keychain to usb 5. on keychain select: USB update 6. Run software 7. well-ah, intelligence > poorly organized device - enjoy everyone
go to their website... www.mscustomercare.com and they have the drivers and stuff there....The problem i have is that after ive charged it for 3 days it wont turn on! It works when its plugged into the USB but as soon as i unplug it....wont turn on!
Hi Maria, I accidentally found out how to get it to work. What the instructions do not tell you is after you move the arrow to USB Update, you want to hit the little power button on the keychain. You should hear a little tone that your computer makes when new hardware is attached. At that point, you should be able to run the program and it should recognize your device.