MY FACEPLATE STOPED WORKING OUT OF NOWHERE...

Sorry, but they won't work.

http://www.pioneerelectronics.com/PUSA/Support/AVIC-S2+Firmware+Update+Notice
UPDATE THE FIRWARE.
http://www.pioneerelectronics.com/PUSA/Support/Navigation/In-Dash/ci.AVIC-N2.Support
here the link of your avic-n2
Sergio

The nav discs come in a set of two. Disc 1 and Disc 2. Insert disc 1 first, if unit does not respond or read nav disc, then you may have a bad copy of the nav disc or incorrect copy.

just got a tech bulletin from pioneer in my bulk mail(almost trashed it). they said its a recall on all avicn1 and 2's. the ribbon wire going from unit to screen fails after many cycles. they are issuing free repair.

Notice: Upgraded Flex-Cable for Flip Screen in Navigation Models AVIC-N1 and AVIC-N2 To: January 3, 2007 Dear Valued Customer: Re: Upgraded Flex-Cable for Flip Screen in Navigation Models AVIC-N1 and AVIC-N2 We would like to inform you of a potential service issue with Pioneer's AVIC-N1 and AVIC-N2, inform you of our plans to resolve this service issue, and ask for your help in notifying consumers. If a consumer is not experiencing any issues currently, there is no need for the consumer to take immediate action because the one-time fix to resolve the service issue will be available if an AVIC-N1 and AVIC-N2 later experiences the service issue. _Importantly, the service issue does not pose any health or safety risk._ Pioneer is aware of a potential issue with the flex-cable powering the flip screen to the AVIC-N1 and the AVIC-N2. After a number of power cycles, the cable has been observed to fail and cause the unit to malfunction (symptoms may include, but are not limited to, the flip-screen becoming blank) -- flex-cable failure can only be confirmed by Pioneer; standard service charges may apply for service issues not related to the flex-cable upgrade. This issue may affect almost all AVIC-N1 units and AVIC-N2 units. Please contact Pioneer at the number listed below if you have a question about whether your AVIC-N1 or AVIC-N2 unit is affected by this issue, or if a specific malfunction affecting your AVCI-N1 or AVIC-N2 is related to this issue. To address this issue, Pioneer is providing a one-time cable upgrade to consumers for their AVIC-N1 and AVIC-N2 at no charge to consumers for parts and labor. Pioneer will offer the free upgrade either upon request or automatically if an affected unit is serviced for another reason. Pioneer will exclusively perform the free cable upgrade for all units (i.e., no other service facility should perform the cable upgrade). If you own an AVIC-N1 or AVIC-N2 and you are experiencing the service issue, please contact Pioneer Customer Service toll free at 800-421-1603 to arrange for the cable upgrade. Pioneer service representatives are available Monday through Friday, 9:00 a.m. to 7:30 p.m. (Eastern Time). Customers who have paid for the cable upgrade are eligible for reimbursement of certain service costs if sufficient proof of service can be provided -- please contact Pioneer at the above-listed phone number for more information regarding reimbursement rules. Customers can also review FAQs regarding this service issue. Click here to view the FAQs. We sincerely apologize for any inconvenience this service issue may cause you, and we thank you for your cooperation and continued support of Pioneer. Sincerely, Pioneer Electronics (USA) Inc. *Pioneer Electronics (USA) Inc., 2265 East 220th Street, Long Beach, CA 90810* ------------------------------------------------------------------------
___________________________________________
owner of
Motion Marine & Car Audio
the florida keys

Hi, did you try a different faceplate. Good luck.

The blinking light is the anti theft light. When face plate is off this light always blinks. As far as the system not working, make sure you have power, check with a voltmeter, then check fuses. Check the fuses on the wire harness and also where you connected the power leads to the vehicle. If you have power, make sure that all wires are connected correctly. Also, check the ports on the stereo and gps unit to make sure no pins are bent over. Sometimes this may happen. If all looks good, there could possibly be a problem with the system. Expensive to get fixed, but there are a few guys on ebay that will fix it for around $150. Might be worth it, but you need to talk to them about that.

It is a common issue for the Avic N series. If it is out of warranty then the guy on Ebay will fix it for you for around $100. Try SAME DAY AUDIO SERVICE, his name is Rick and he is very reliable. Goodluck.

Check the connections at your brain, you probably pull it loose when you removed the N1. Goodluck.

bestbuy.com go to the bottom of the page and click on order parts and just follow the white rabit down the hole and buy one

you need a ribbon cable