Question about Labtec LCS 1024 Computer Speakers

Open Question

Do not know how connect lcs 1024 speakers

Need a owners manual threw mind away dont remember how to hook up to cpu

Posted by on

4 Suggested Answers

Open SKy
  • 508 Answers

SOURCE: Schematics

Dclf1
Good day!
First things first:
1) you only can find those schematics on
http://www.labtec.com/index.cfm/service/splash/AMR/EN,CRID=3
but have to call or email support.
hope they can send the info.
Open Sky

Posted on Feb 15, 2008

SOURCE: Labtec LCS 1024

Do you have any schematic of Labtec 1025 with wiring conection? Thank you for your response it does help me alot

Posted on Mar 29, 2008

  • 4 Answers

SOURCE: labtec speakers want play

check whether the output plug is connected properly or not.... if it is then check out whether the adapter is giving the power output.... if it is then the speakers are spoilt otherwise u can just replace the adapter...

Posted on Feb 08, 2009

2dcapcom
  • 51 Answers

SOURCE: installing Labtec LCS 800 speakers

1 wire goes between the 2 speakers
1 wire goes from the speaker with 2 jacks in it to the computer, the back of the computer should have a green port to plug in the cable to
1 wire is the power

this is a guess without seeing your setup

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have LCS-1012 speakers. Where do I plug them into the back of the computer? Do I only need the cord that is attached to one speaker?


Hi,

Your speakers should have come with a power cord also, because they need a power supply also.

But the cord you have to plug in goes into the green round terminal on the back of your PC. If the cord it a usb then fit it to any of the spare usb connections.

Hope this helps, let me know if you need more information.

Thanks

Jason

Oct 15, 2010 | Labtec LCS 1012 Computer Speakers

1 Answer

I do not have manual or driver, how do I install Labtec LCS 1014?


mcdevito75 here, Your computer already has the Audio installed, you just need the speakers themselves hoked up. If your a bit handy simply obseve the cable ends of the cables supplied with the speakers, plug the cables into the speakers, one cable should connect both speakers together for stereo and a 3rd cable should connect 1 speaker with the back of your computer, there will be a symbol for speaker on the back of your computer. Do not force and cables, as they should fit with a gentle push into place on the speakers and computer. Visit your local Radio Shack or Staples for more info.

Jul 14, 2010 | Labtec LCS 1014 Computer Speakers

2 Answers

I just hooked up my Labtec LCS-2420 speakers to my new computer and can't get any sound out of them. I can get the cheap ones that came with the computer to work, but not the Labtec. I hooked them up to...


if its a 6 channel connection its a little tricky try reconnecting your speakers that has a green connections. try playing a music while troubleshooting the connection...hope this helps..ITTech7574

Aug 29, 2009 | Labtec LCS 2420 Computer Speakers

2 Answers

No wires for labtec lcs-3210


1500mA @ 15VDC. I've got a set of these speakers and I just looked at the adapter.

Jun 21, 2009 | Labtec LCS 3210 Computer Speakers

1 Answer

Dog Problem


If it's just the cord that was damaged, you can simply replace the cord

Jun 11, 2009 | Labtec LCS 2424 Computer Speakers

1 Answer

Installing Labtec LCS 800 speakers


1 wire goes between the 2 speakers
1 wire goes from the speaker with 2 jacks in it to the computer, the back of the computer should have a green port to plug in the cable to
1 wire is the power

this is a guess without seeing your setup

Feb 17, 2009 | Labtec Computer Speakers

1 Answer

Labtec speakers want play


check whether the output plug is connected properly or not.... if it is then check out whether the adapter is giving the power output.... if it is then the speakers are spoilt otherwise u can just replace the adapter...

Feb 07, 2009 | Labtec Spin 70 Computer Speakers

2 Answers

Labtec LCS 1024


I don't have a wiring diagram for you but can tell you this as standards apply.

Red is always the positive (+) terminal and black the negative, ground, (-) terminal. FYI-though people use the term ground it is not correct.

Another thing you should know is red and black are relative. Inother words, when red to red and black to black it will cause an outward motion of the speaker. If you happen to reverse them, red to black, it just causes an inward motion of the speaker. Sometimes this is refered to as the "phasing" of the speaker.

Speakers are usually marked at their connection points with a red dot or a (+) for the positve and a black dot or (-) for the "negative" side.

So there's nothing to worry about if this happens anyway except:

if you were to go red-black on one speaker, and red-red on the other. This will cause the speakers to be in series which normally wouldn't hurt things, but make sure it's not done just in case you amp section cannot tolerate this condition.

Hope this helps.

Jeff

Mar 19, 2008 | Labtec LCS 1024 Computer Speakers

1 Answer

Schematics


Dclf1
Good day!
First things first:
1) you only can find those schematics on
http://www.labtec.com/index.cfm/service/splash/AMR/EN,CRID=3
but have to call or email support.
hope they can send the info.
Open Sky

Feb 09, 2008 | Labtec LCS 1024 Computer Speakers

Not finding what you are looking for?
Labtec LCS 1024 Computer Speakers Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Labtec Computer Speakers Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

508 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Are you a Labtec Computer Speaker Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...