Question about HP OfficeJet V40 All-In-One InkJet Printer

3 Answers

The printer only prints partial pages

The printer only prints one partial page and then stops printing.
It prints the test page.
It copies correctly
It prints faxes.
It only fails when printing directly from the internet of from a file from my computer.
I have downloaded and installed the lastest software.

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 4,806 Answers

Unistall the printers software, download CCleaner and clean the registry,CCleaner here:
http://www.filehippo.com/download_ccleaner/

restart the PC and install the software again making sure you realign the cartridges

kind regards

Posted on Dec 04, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 341 Answers

It may be that your color cartridge is running out of ink. Ink for H.P printers is pretty cheap. Try that out first.

Posted on Dec 04, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,550 Answers

Check the paper settings in the printer .

Try to reset the paper settings.

Posted on Dec 04, 2008

1 Suggested Answer

  • 1 Answer

SOURCE: Printer prints partial page and then stops

We have had the same problem. I have found that if I close all windows not being used on the computer, then try to print the document again the entire document prints. This happens on an older computer we have that doesn't have alot of RAM.

Posted on Dec 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Two side copy ka tareeqa tell me


DOUBLE SIDED PRINTING USING A SINGLE SIDED PRINTER

If your printer does not have a duplex unit then the printer cannot print double sided pages automatically.
You can print double sided pages but you have to do it one page at a time.
First print Page 1 then place the page back into the paper tray, but turn the page upside down and the print Page 2.
Then print page 3 on one side then page 4 on the other side and repeat for the rest of the document.
I suggest you try a test page first, to get the printing the right way up on both sides of the page so it reads correctly.

May 02, 2013 | Printers & Copiers

1 Answer

How to copy 2 sided


If your printer does not have a duplex unit then the printer cannot print double sided pages automatically.
You can print double sided pages but you have to do it one page at a time.
First print Page 1 then place the page back into the paper tray, but turn the page upside down and the print Page 2.
Then print page 3 on one side then page 4 on the other side and repeat for the rest of the document.
I suggest you try a test page first, to get the printing the right way up on both sides of the page so it reads correctly.

Mar 31, 2013 | HP Printers & Copiers

1 Answer

My hp1012 is printing dark with shading on the pages and shadow or echos. Can something be replaced or fixed?


with this issue, you pretty much have to run a half way test unless you have the convieniance of another toner to try. basically, it's either going to br your toner or your fuser and a halfway test will determine this if you don't have another toner to try.

The Half-way Test

You will need to print a page and open the toner lid when you think the paper is underneath the toner cartridge. This will stop the printing so you can pull the toner cartridge out and look at the partially printed paper. It may take a few tries to time this test correctly so the paper stops under the toner but not completely into the fuser.
1. Print a test page from Tray 1, the "fold-down" Multi-Purpose tray on your printer.
2. Just as the test page completely disappears into the printer, open the toner lid door. The print job will stop, sensing an error.

3. Pull the toner cartridge out, and you will find the test page sitting directly underneath the toner.
4. Carefully remove the page by gently pulling the page upwards & free from the toner cavity. Careful! The toner has not yet been fused to the paper, so the print can be somewhat messy on your hands and may smudge easily.

Examine the printout.
1. If you do not see the print defect on your test page, that means the defect is being added later in the print process by the fuser. Fusers are the main component in a maintenance kit; click here to view our selection of maintenance kits for various LaserJet printers.
2. If the print defect is visible on this printout, that means the print defect is occurring before the fuser. Try replacing the toner cartridge (click here to view our selection of toner cartridges).
If you determine the print defect is occurring before the fuser, and swapping toners doesn’t fix the problem, there could be several things causing the problem. In the order of most likely to least likely: you could have two defective toner cartridges, the transfer roller might be faulty, the laser scanner could be dirty or defective, or the high voltage power supply could be bad. You might want to email or call since these scenarios are not as common.

Order Fuser Here!

Order Transfer Roller Here!

hope this helps and if so please mark FixYa!!

Jul 24, 2010 | HP LaserJet 1012 Printer

1 Answer

I try to print a card or bank statements and nothing is printing just put in new ink, it only prints the 1st page of a quarter fold card, it should all be on one page and it prints only partial card


IF the Kodak AiO printer is printing partial ther are two main device of the printer that have issue on the scanner [where you put the document for copying] or the printhead of the printer.
Step that you can do
1. Try to print a test page in this way you can check if the printer prints whole page. How to print test page press copy button and photo button on the printer for atleast 10 sec. or until the printer starts printing. Reminder Test page doesn't need a document on the scanner glass. It will print an advertising doc for the printer. Now if the test page is half/partial it is the printhead that has an issue. If it print the whole page it is the scanner that has issue contact kodak for printer repair
2.Clean the printhead twice and reseat the printhead it
How: press menu button then select clean printhead then select basic/deep clean. To reseat printhead open the printer access door; remove the ink cartridges; remove the printhead; close the printer access door then open the printer access door insert the printhead then the ink cartridges.
3. Try to print again [For futher support call Kodak support line at 1 800 421 6699]

Nov 21, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

5610 printing just a line in the middle of the page, else blank!


wow..I could be the FIRST..I am impressed..NOT!
check to see if there is ink, by blotting the print head on damp paper towel.
otherwise..delete and reinstall the printer. could be a software problem.

Apr 11, 2009 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Printer prints partial page and then stops


We have had the same problem. I have found that if I close all windows not being used on the computer, then try to print the document again the entire document prints. This happens on an older computer we have that doesn't have alot of RAM.

Dec 04, 2008 | HP OfficeJet V40 All-In-One InkJet Printer

1 Answer

Test Page


thats not the test page that is allignment page which is printing.
keep the the printed side of that page which comes out on the scanner glass.press the ---scan ---button.the on /off light will blink, wait till it stops blinking.and after that everything will be normal.

for any thing else let me know.
thanks.

Sep 17, 2008 | HP LaserJet 1200n Printer

1 Answer

In starting 1 page print


Hi,

I believe that after changing the ink cartridge you havent completed the alignment process.This Alignment test page will print everytime you turn the printer ON.To Complete the alignment follow my steps.

1.After turning the printer ON, wait untill the printer prints the Alignment test page.

2.Then place the alignment test paper on the scanner, facing down in a correct position.

3.Then press the Scan button(color) and wait untill the printer ON light stops flashing.

4.After the light stops flashing, take the paper out and the alignment process is completed.

Turn OFF and turn On the printer, it will not print the Test page again.try it and please let me know.Would really appreciate your rating for my solution.

Thanks
Riz.

Apr 15, 2008 | HP PSC 1315 All-In-One InkJet Printer

Not finding what you are looking for?
HP OfficeJet V40 All-In-One InkJet Printer Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96372 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...