Question about CreoScitex EverSmart Jazz Flatbed Scanner

1 Answer

I need help

Can you tell me where to find a bulb the # on the bulb is fl15ad-70

Posted by on

  • bstokes13 Dec 04, 2008

    if you have anymore links please let me know I ve try this one and they don't care it any longer.

  • Anonymous Jan 07, 2009

    FASTEK LEEDS can get bulbs I've bought 2!



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 126 Answers

Try this link, hope this helps.

Posted on Dec 04, 2008

  • Slick54 Dec 04, 2008


    Searched every where for you and can only conclude, this is a dinasoar, ha, ha. It's definitley a quality scanner, however, no luck on the bulb. You may want to consider trying to find a used one and buying the whole machine if the bulb works. This is a quality scanner and if you can find a used one you will not only get the bulb but replacement parts too.

    Good luck sorry I could not find what you needed.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to change a light bulb on my Frigidaire oven model RT 70 light bulb in the signal light area in the surface unit switch?

Hello Heidi, thanks you for your inquiry!

From the information you have provided you need to change the light bulb inside of your Frigidaire Imperial Electric Range. This appears to be an older model and I was unable to locate any direct information on how to change a bulb. Since your appliance is older than ten years old the manufacturer may not have any information for it. You may need to perform a generic search online for further help with the bulbs or speak with a local technician. I hope this information is helpful. -Matt

Jun 02, 2015 | Frigidaire Kitchen Ranges

2 Answers

I have a 2006 nissan murano, it has high intensity lights. during inspection they replaced the left bulb, the part cost $180. The light still didn't work, now their telling me the ballast is bad and I need...

Since you can buy that headlight bulb for $70-80 with a lifetime warranty I think I would give the bulb back, get a refund and go elsewhere. I may be wrong and don't mean to accuse wrong doing but something doesn't seem to be on the up & up.

Nov 17, 2010 | 2006 Nissan Murano

1 Answer

Purchased the 70 watt fixture and supplier said I could put in a 35 watt bulb because I didn't want it so bright. The light goes on but exceeds 35 watts and then shuts off after 5 min. Is it possible to...

The simplest thing to do would be to use the 70 watt bulb and then install a dimmer switch...that way you can dimm to what ever level you want and still have the full brightness if you want....
dimmer switches are not that exspensive and are easy to install...


Sep 08, 2010 | Garden

1 Answer

Sony wega 70 in new bulb lasted 8 hours now

hello.+ over voltage protection (OVP), unit goes to the standby mode then displays the 3 blink fault. This is also a problem in the power supply circuit, check T603 and R672.

Oct 21, 2009 | Sony Grand WEGA KDF-60XS955 60" Rear...

1 Answer

Replaced a Xenon bulb on my 2004 Saab 9-3, still doesn't work...

Do yourself a great favor clean the inside of the socket and then put a little wd40 on the backside of the bulb then try again also check grounds near the headlights ok

Mar 10, 2009 | 2004 Saab 9-3

1 Answer

Sanyo projector PLV-70 color lenses fell out when changing bulb.

Trial and error---putting them in each different slot until we got it right))..pain in the ****!! :-)

Jan 29, 2009 | Sanyo PLV 70 Multimedia Projector

Not finding what you are looking for?
CreoScitex EverSmart Jazz Flatbed Scanner Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creo Office Equipment & Supplies Experts


Level 3 Expert

102366 Answers


Level 3 Expert

2237 Answers


Level 3 Expert

77169 Answers

Are you a Creo Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides