Question about Sanyo VWM-950 VHS VCR

1 Answer

Can't view tapes on vcr

Had an upgrade with my Dish Network which shows channels on channel 73. how can i view movies on my vcr?
thank you.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 51 Answers

I assume that you are coming in on channel 73 because you don't have a line level input on the display (tv) you are using. If that is the case, your options are limited. If you DO have a line input to the monitor, run the VCR to that input and just switch to that input when you want to use the VCR. If you have RF in only, -that would be the screw on type connector- you would have to have the same kind of output on the VCR. Understand, the VCR will be outputting to channel 3 or 4, so you would need a 2x rf switch, and you would have to change from channel 73 to 3 or 4 whenever you wanted to watch a movie. There may be other options, but I don't really know what you have.

Posted on Dec 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Dual control noted on Dish tv screen but cannot change stations separately on both tvs


Each TV receiver has to be fed with a separate cable from the lnb. They can not be bridges or split.

Mar 09, 2015 | Dish Network/Pansat Dish Network Dish 500...

1 Answer

I am trying to get my Dish Network to work on my Phillips HDTV. Dish Network told me that my television needs to be on channel 73 and when I try to put that channel in with the remote, the channel...


on your tv go to menu & somewhere there it will say scan for channels so it will scan for about 5 mins then grab your remote & turn to channel 73 & there you go . if not try moving the tv to a different source like AV or YDRB

Jun 23, 2011 | Cell Phones

1 Answer

I own a older model citizen tv vcr combo. it is the box style and i cant watch any channels on it. the only channel it allows me to view is ch 2. i can watch a movie aswell. also if there is not a movie...


You need to autoprogram your channels with the Remote that came with the VCR combo. The Tape issue is common with many older TV VCR combo units. Put a tape in that is rewound and hit stop and then tune in your channels.

Jan 19, 2011 | Televison & Video

1 Answer

I'm trying to get my 32 inch envision tv to change channels and it won't change at all!! I need to get it to channel 73 to work with my box free dish dvr that's in the other room!! Any suggestions??...


We would be happy to help with that. Some TV's do not havethe ability to go as high as channel 73; this may be the case for yourEnvisionTV. We would recommend changing the channel that your DISH Networkreceiver outputs the picture for your TV2. Start by pressing the"Menu" button, from the main menu press 6 for "SystemSetup", then 1 for "Installation", and then 5 for"Modulator Setup". Under TV2 we are going to change the mode to"Air", the channel displayed beside it should change to 60, selectdone on the right side of the screen to save the changes. Now change thechannel of your TV2 to 60 and you should get the DISH Network programming.

We hope this helps. Thanks so much for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Jan 14, 2011 | Envision L32W761 32 in. LCD TV

1 Answer

Connect dvd/vcr to HD-tv via dish network


Hey my nameis Mike Houston of DISH Network and I see where you want to run the SanyoDVW-6000 DVD/VCR Player to the DISH Network receiver. You can run the SanyoDVD/VCR directly to the TV and pick the channel you want to record and it willrecord the channel showing.

Dec 07, 2010 | Sanyo DVW-6000 DVD Player/VCR

1 Answer

Need to change channel to 73 so my dish tv will work, it seems the highest channel tv set will go is 69


We would be happy to help with that. Some TV's do not havethe ability to go as high as channel 73; this may be the case for your (enterbrand here). We would recommend changing the channel that your DISH Networkreceiver outputs the picture for your TV2. Start by pressing the"Menu" button, from the main menu press 6 for "SystemSetup", then 1 for "Installation", and then 5 for"Modulator Setup". Under TV2 we are going to change the mode to"Air", the channel displayed beside it should change to 60, selectdone on the right side of the screen to save the changes. Now change thechannel of your TV2 to 60 and you should get the DISH Network programming. Wehope this helps. Thanks so much for being a valued DISH Network customer! Phillip Chang DISH Network Customer Service Representative

Nov 30, 2010 | RCA 27F530T 27" TV

1 Answer

I need to get to channel 73 to connect to Satellite Dish network, but it keeps telling me there is no channel in list ???? what do i do..Thanks


We would be happy to help with that. Some TV's are not ableto go as high as channel 73. This sounds like you're having an issue with yourTV2, this would be the TV located in a different room than your DISH Networkreceiver. Go to the main TV by the receiver, press the menu button located onthe top left of your DISH remote. Once in the main menu, press the numbers6-1-5, this will take you to the "Modulator Setup" screen. Once there we want to highlight the "Air"option located below "TV2 Out" then press the select button. TheChannel should change from 73 to 60. Change the channel of the TV you arehaving an issue with to channel 60; you should get the DISH Network programmingat that point. We hope these steps help you get that fixed. Thank you for beinga valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Oct 16, 2010 | Haier HTF20 20" TV

1 Answer

Dish dvr 625 can't get dvd/vcr player to work with tv2..


if you have the coax hooked to the VCR in you will need to change the VCR channel to 22 and leave the TV itself tuned to 3 or 4.. I recommend setting the vcr to 60 or 73 to see if you can get reception on there as that is usually the two channels that TV2 is modulated on. You can check the modulation by going to TV1 and pressing menu-6-1-5 on the TV1 remote. Thanks for using Fix Ya. If I can be of further assistance please let me know.

Jan 28, 2009 | DISH Network DVR-625 DTV Receiver /...

1 Answer

Had dish network update - can't view vcr tapes


the output of the vcr...
what is it physically wired to?

Dec 04, 2008 | Sanyo VWM-950 VHS VCR

Not finding what you are looking for?
Sanyo VWM-950 VHS VCR Logo

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72640 Answers

 Grubhead
Grubhead

Level 3 Expert

4853 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...