When a file is sent to print it seems to go through all the motions (even showing "printing" status and then comes to a hault indicating "error" status. I also pinged the printer and it was recognized. I've deleted all the jobs in the print queue, powered off the printer, however, to no avail. I even had the network guys reset the printer as well as remove it from the network and add it back on and it still does not work.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To print duplex on a Mac:
1. After finishing your document, go to File >> Print. You will see something like the following:
2. Make sure that Layout is selected:
3. Under two-sided, make sure than Long-edged binding (or something similar) is turned on.
This will allow you to print duplex (two sided) on the Mac.
I had a similar issue with my 510. My printer would only print in b&w regardless of my settings in the printer setup. I uninstalled my printer driver and reinstalled a fresh one from disk. This cleared up my issue.
Well one thing you should do is when your printing something out before you print make sue that you have selected color not black and white because most printers have a default setting to use black and white. Also make sure that you have color ink available to print.
1 Could be toner on the contacts (inside the printer) that mate with the contacts on the cartrdige.
2 Are you sure they are 510 toners and not 500 ones ?? 510 toners have a chip that identifies the cartridge (Colour, Capacity) and maintains a count of the pages printed.
500 toners have a reset fuse that resets the toner counter in the printer, and a resitor that identifies the capacity
3 Are they new cartridges, remanufactured, or 'home refiled'.
if either of the later two, were the chips replaced ? - if not the cartridge still thinks it has printed its full life of pages.