Question about Philips Magnavox MWR10D6 DVD Recorder

1 Answer

VCR WON'T RECORD

I bought a Magnavox DVD/VCR and hooked it up to my tv with a cable box using a RF Modulator. I can play VHS tapes and DVD's just fine but when I try to use the VCR and record it does not record. I'm pretty sure it is all hooked up right because otherwise the tapes or dvd's wouldn't even play. When I try to record the counter moves like it is recording but then nothing is on the tape. If I try to hit record while watching a TV when I turn on the VCR/DVD the tv screen turns blue and I cannot see the TV program anymore.
Please help.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 558 Answers

You may have the outputs hooked up correctly however you may need to set the inputs to the selected type of cable you are using. S video 1 cable or video input witch is an rca adapter yellow in color. you will find these setting in the "setup section" on the remote set up button will get you there and then input or source.

Posted on Dec 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

DV220MW9 DVD/VCR: won't record video on VHS


your cable tv connect into dvd/vcr,video/audio out connect to av in your tv,solved

Jul 06, 2009 | Philips Magnavox DVD/VCR Dual Player

3 Answers

Magnavox DV220mw9 won't record from Tv, hard to connect


check out this diagram, paying close attention to the audio video cable hookups.

assume the cable tv box represents the converter box

you are going to come out of the converter box audio and video outputs into the new magnavox dvd/vcr combo audio and video inputs.

Then out of the new magnavox dvd/vcr combo outputs to the inputs on the tv if it has such inputs. The TV will have to operate on the video input 1 or 2 if the tv has such a thing, use the remote for the tv to adjust the input signal to line in 1 or 2 depending on what it has.

If the tv has no coaxial input or audio video inputs then you might have to use an adapter, you can get these from radio shack.

You say it will not record from the tv, but in all actuality the dvd vcr combo is getting the signal from the converter box not the tv, do you understand what I mean here?

So the dvd vcr combo gets input from the converter box so you will have to set it to view signal from the line input you have plugged in from the converter box. line 1 or 2 or whatever the input is.

the tv will have to be set on the line input to view the signal from the dvd vcr combo.

That is as easy as I can put it. Study the diagram closely. You will see what I mean.

Mar 07, 2009 | Philips Magnavox DVD/VCR Dual Player

2 Answers

Wirring up (HDTV) from DV220MW9 to TV


I had the same problem & had to purchase a seperate RF Modulator for $18.
But I still have a problem & can't record TV shows onto a VHS tape, possibly
due to my older TV.
Hope you have better luck than me on recording : )

Dec 25, 2008 | Philips Magnavox DVD/VCR Dual Player

1 Answer

Tv/digital converter box & vcr-dvd hook-up


ok cable sat wire goes into input of dvd-vcr input then coming out from the dvd vcr and into the moulator then a wire out to the tv now make sure your vcr is set to the right setting ...now you can record 1 cable..2.vcr dvd..3 modulator...4...tv make sure vcr is set to monitor

Dec 04, 2008 | Philips Magnavox DVD/VCR Dual Player

3 Answers

DVD/VCR Combo


your model is "tuner free" that means it does not have the RF screw in connector. Buy one that has a tuner, preferably both ATSC(USA digital) and NTSC(USA analog)

Jul 17, 2008 | Philips Magnavox DVD/VCR Dual Player

2 Answers

Memorex MVD4544 VCR will not record


Take the unit back to the store and exchange it for an other unit of the same. The likelyhood of two units not working is very slim, and good luck with your new unit.

Jan 26, 2008 | DVD & Blu-Ray Players

1 Answer

Zenith xbr716


ALL cable is digital.
What type of TV do you have? Does it have any scart conections on it? If not connect the Cable box with a scart lead to your VCR select the AV channel on your VCR, connect your VCR to your TV via the RF connection, (if it has not got one, its not a TV, its a monitor). Tune your TV in to the video channel.
You do not need an RF modulator for a home TV setup, whoever told you that is a fool.

Dec 28, 2007 | Zenith XBR716

1 Answer

Recording Snow


If you hook your VCR up to the RCA jacks on the front of the DVD recorder, push 002 on the remote to use the front input jacks. (001 if you hook your VCR up to the rear input jacks)

Push record on the DVD recorder, and push Play on the VCR.
(Pg. 35 in the manual)

When you push play on the VCR, you should be able to see the movie being played on your TV. If you cannot, make sure your RCA cables are good and hooked up correctly.

That's all you have to do, so if it's not recording I would try to take the unit back for an exchange.

Dec 03, 2007 | Philips Magnavox MWR10D6 DVD Recorder

1 Answer

HELP! I can't figure out how to Connect my Sylvania DVD/VCR Combo to my older TV


Even if you do get it connected you cannot copy from vhs to dvd as you have bought a vcr recorder with dvd player, not a dvd recorder. You can only record to the vcr tape from a dvd, in the players controls.

Feb 08, 2007 | Sylvania (SRDD495) DVD Player/VCR

Not finding what you are looking for?
Philips Magnavox MWR10D6 DVD Recorder Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips DVD & Blu-Ray Players Experts

Steven

Level 1 Expert

6 Answers

Cindy Wells

Level 3 Expert

4757 Answers

rugby prop

Level 3 Expert

446 Answers

Are you a Philips DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...