Question about Epson Stylus CX6600 All-In-One InkJet Printer

1 Answer

Can't print printer's waste ink absorver almost full

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 148 Answers

You have to open it and clean the ink absorver...you should reset the counter too....
Use SSC software counter reset waste reset...

i think this will solve your problem...Good lucky!

Posted on Dec 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Waste ink absorver is full problem canon pixma ip 1200 printer. How can solved is problem




* Download General Tool for Canon iP1200, iP1600, 2200 Printers. Download GeneralTool
* Extract downloaded file the run the software by click GeneralTool.exe.
* Select the connected usb port number from usb port then click lock Release then select the applicable model name in set destination setting.
* In clear waste ink counter, click main to reset the main waste ink counter or platen to reset the platen waste ink counter.

http://downloads.ziddu.com/downloadfile/11558413/resetterforip1600.rar.html


http://canon-printer-resetter.blogspot.com/2009/01/canon-pixma-ip1200-ip1600-ip2200.html

Dec 02, 2010 | Canon PIXMA iP1200 Photo Printer

1 Answer

It says that the ink absorver is almost full and printer does not print job


It's time to replace 3's WASTE INK ABSORBER KIT & reset waste ink counter.
The WASTE INK ABSORBER KIT is approx. USD10/pcs

Apr 06, 2010 | Canon PIXMA iP90v Printer

1 Answer

Printer won't print. Says to contact service


Issue: Alarm / Power light flashes orange 8 times consecutively (Waste Ink Nearly Full Error)
Solution: Press the <RESUME/CANCEL> button to clear the error (1700)
Waste ink absorber error 1700
The printer has a built-in waste ink absorber to hold the ink used during print head cleaning. Eight flashes indicates that this absorber is nearly full.

Press the <RESUME/CANCEL> button on the printer to clear the error, so you can continue the print job. The printer will need to be serviced as soon as possible.


Issue: Alarm / Power light flashes orange 8 times consecutively (Waste Ink Nearly Full Error)
Solution: Press the <RESUME/CANCEL> button to clear the error (1700)
Waste ink absorber error 1700
The printer has a built-in waste ink absorber to hold the ink used during print head cleaning. Eight flashes indicates that this absorber is nearly full.

Press the <RESUME/CANCEL> button on the printer to clear the error, so you can continue the print job. The printer will need to be serviced as soon as possible.


Dec 10, 2009 | Canon PIXMA iP1500 InkJet Photo Printer

1 Answer

Waste ink absorver is full


kindly follow this steps to fix the error
Reset manual "Ink Absorber Full" for pixma
Steps by steps how to reset :

1. Turn off the printer but still connected to a power source
2. Press stop/reset button, and then press power button to restart
3. Press power again and then press twice the stop/reset button.
4. Press power & Stop/reset button together, to enter
the repair status and power lights will be green,
5. Press stop/reset button
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
6. Turn off the printer
7. Unplug the power cable.
8. Plug the power cable and then turn it on again.

Nov 12, 2009 | Canon PIXMA MP170 All-In-One InkJet...

1 Answer

Ink absorber is full


How to clear E27 Waste ink absorber full
1.With the printer powered off but connected to a power source,
press the Power button while pressing and holding the Stop/ Reset button.
2. When the Power is lit, press the Stop/Reset button two times
while pressing and holding the Power button.
3. When releasing the Power button and the Stop / Reset button (regardless of order),
the printer will move into a service mode. (Waiting for menu selection)
4. When the on/off lights in green, press the Stop/Reset button the
specified number of time(s) according to the function listed in the table below.
(Each time the Stop/Reset button is pressed, the LED lights alternately in orange
and green, starting with orange.)

Note: press 4 times for waste ink counter reset.
The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print

2 times Green EEPROM print
3 times Orange EEPROM reset

4 times Green Waste ink counter reset
5.Turn off the printer.( it must be turn off) then turn it on again

Jun 20, 2009 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

Hi, I have a Canon PIXMA iP 1600 printer. Recently, I started to get a message that says: The waste ink absorber is almost full. Press the printer's RESUME button to restart ...


I have a Cannon PIXMA ip 1600 printer. Recently, I am getting a message that says: The waste ink absorver is almost full. Press the printer's resume button to restart printing. What is this ? How to solve this problem ?

Jun 15, 2009 | Printers & Copiers

1 Answer

E 8 flashing


Check the solutions i have posted and it should be able to help you with your problem

Feb 09, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

The waste ink absorver is almost full


It's time to replace 3's WASTE INK ABSORBER KIT & reset waste ink counter.
You have to send it to your nearest service centre to do the service job.
The WASTE INK ABSORBER KIT is approx. USD10/pcs

Jan 23, 2009 | Canon PIXMA iP90 InkJet Printer

2 Answers

Waste ink absorver is full and printer cannot print


Waste Ink Tank Reset

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

This will clear the message, if the ink absorbers need replacing , the message may come back . Is so let me know and I will search for the manual.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Jan 16, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

How to fix the waste ink absorver


You take it to the service and they clean the printer and reset the waste ink absorber. I did it twice.

Feb 02, 2008 | Canon PIXMA iP1500 InkJet Photo Printer

Not finding what you are looking for?
Epson Stylus CX6600 All-In-One InkJet Printer Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Cindy Wells

Level 3 Expert

4757 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...