My last post was a CDJ with a separate fault, causing a similar type fault.
99% of the time, this particular fault is the Flac switch under the platter jog wheel, take the jog wheel apart clean the plastic strip that runs around the jog wheel, the one with rubber feet that activates as a pressure switch.
Often there is air bubbles, liquid, condensation in between the two layers - causing it to stay in touch mode. If that doesn't fix it then you need to replace that strip (pressure switch). They are about £30 quid.
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
airbag line , computer or airbag unit is faulty. repairing the fault will rectify the message. its probable that if the vehicle was not in an accident that it is a line probably under the passenger seat. play with the wires under seats with the ignition on and see if at any point the light disappears, if so repair that set of wiring as plugs corrode
hi i have found on modus the computer said one thing and the fault was completely different so it's best to go to a good auto electrician with a diagnostic machine to find the fault, don't go to a reno dealer as they will charge you a fortune.
hope this help's.
There is a relay in side of the cb that might be sticking. The problem is that this situation might be environmental. You say that you sent it back to Cobra twice for repairs. I think that the place you are sending it to differs enough environmentally so that the problem does not manifest itself. You can test this by exposing the unit to differenttemperatures, to determine if the internal relay is sensitive to variations in temperatures.
If you do find that the relay has become tempurature sensitive, you can order the part from Cobra, or strangly enough from Radio Shack, since they do carry the same part just by a different part.
More than likely you have a bad switch, although this is not something that you could service yourself. I would suggest taking it to a service center in your area. Make sure they are Pioneer authorized, and know what a CDJ800 unit is!
The tweeters are probably blown, i had the same problem.
You can test this by placing the cable on the dismanteled crossover at the back of the speaker. colour blue/yellow.
No high volume please.
If the tweeter is blown it can be dismanteld with the aid of a screwdriver, horizontally.
Place it between the tweeterbowl and the ring which has the mark wharfedale on it. The tweeter comes loose. On second hand sites you can buy little speakers, like modus one or two's with the same tweeters for a good price and put them on your larger speakers.